Repetition Maximum Research Articles

The influence of real-time quantitative feedback and verbal encouragement on adults' performance in maximal and explosive strength and power in bench press exercise.

In sports practice, a wide array of verbal and non-verbal stimuli can elicit diverse motivations and performance changes. Therefore, the primary objective of this study was to compare the impact of various stimuli on maximal strength and power in bench press exercises. This study involved 48 university students (average age 20.5 ± 2.8years; body mass 80.1 ± 20kg; height 174.6 ± 6.7cm; BMI 26.2 ± 6kg/m2) who engaged in an 8-week resistance training program. The students were randomly divided into three experimental groups and one control group. The first group received real-time quantitative feedback (RF) on their power output during the bench press exercise, the second group received verbal encouragement (VE) from an instructor, and the third group exercised without any external stimulus (WS). The control group (CG) underwent only pre- and post-measurements. To compare differences in strength parameters among groups a Two-Way Repeated Measures ANOVA was applied. The results revealed significant improvements in the mean weight for one repetition maximum in the real-time quantitative feedback group (5kg, 9.76%, p = 0.001, d = 0.529) and the verbal encouragement group (5.42kg, 11.51%, p = 0.001, d = 1.201). Positive changes were also observed in the mean power at 20 and 30kg for the RF, VE, and WS groups, but at 40kg, significant improvement was only seen in the real-time quantitative feedback group (247W, 31.30%, p = 0.001, d = 1.199). These findings underscore the effectiveness of selected stimuli in enhancing maximum strength and power during bench press exercises, with real-time quantitative feedback proving to be the most effective stimulus for improving both maximal strength and power.

Nonlinear Optical Response of Au/CsPbI3 Quantum Dots and Its Laser Modulation Characteristics at 2.7 μm.

A passively Q-switched Er:YAP laser of 2.7 µm, utilizing Au-doped CsPbI3 quantum dots (QDs) as a saturable absorber (SA), was realized. It was operated stably with a minimum pulse width of 185 ns and a maximum repetition rate of 480 kHz. The maximum pulse energy and the maximum peak power were 0.6 μJ and 2.9 W, respectively, in the Q-switched operation. The results show that the CsPbI3 QDs SA exhibits remarkable laser modulation properties at ~3 μm.

Influence of Grip Width on the Load-Velocity Relationship and 1 Repetition Maximum Value in the Bench Press Exercise: A Comparative and Reliability Analysis of Mean Velocity Vs. Mean Propulsive Velocity Vs. Peak Velocity.

Herrera-Bermudo, JC, Puente-Alcaraz, C, Díaz-Sánchez, P, González-Badillo, JJ, and Rodríguez-Rosell, D. Influence of grip width on the load-velocity relationship and 1 repetition maximum value in the bench press exercise: a comparative and reliability analysis of mean velocity vs. mean propulsive velocity vs. peak velocity. J Strength Cond Res XX(X): 000-000, 2024-This study aimed to analyze the reliability and compare the load (percentage of 1 repetition maximum [%1RM])-velocity relationship, bar displacement (DIS), the 1RM, and the velocity attained against the 1RM value (V1RM) in the bench press exercise using 3 different bar grip widths: narrow (120% of the biacromial distance [BD]), medium (160%), and wide (200%). A group of 54 healthy, physically active men randomly performed a total of 6 incremental tests (1 week apart) up to 1RM (2 with each bar grip width) on a Smith machine. The mean velocity (MV), mean propulsive velocity (MPV), peak velocity, and DIS were recorded for the subsequent analysis. The 3 velocity variables showed high relative (intraclass correlation coefficient: 0.90-0.97) and absolute (coefficient of variation: 2.21-9.38%) reliability in all grip widths against all relative loads. The 1RM value and the V1RM present high absolute and relative reliability in all grip widths. There are no significant differences in the value of 1RM and V1RM between grip widths. High relationships were observed between the relative load (%1RM) and velocity variables, with MPV showing the best fit. Significant greater values in MPV, MV, and DIS associated with each %1RM were observed for narrow and medium compared with wide grip width. In conclusion, our results suggest that the 3 velocity variables were highly reliable at the different grip widths used against all relative loads. In addition, there was a tendency to reach higher MV, MPV, and DIS values as the grip width decreased. Therefore, this factor should be considered for the assessment and design of training.

Scaling of laboratory neutron sources based on laser wakefield-accelerated electrons using Monte Carlo simulations

Neutron sources based on laser-accelerated particles have attracted interest as they may provide a compact, cost-effective alternative to conventional sources. Recently, laser-driven neutron sources, based on ion acceleration, demonstrated neutron resonance spectroscopy, imaging and resonance imaging in first proof-of-principle experiments. To drive these sources efficiently with laser-accelerated ions, high laser pulse energies, in the range of tens to hundreds of Joules, with sub-ps pulse duration are needed. This requirement currently limits ion-based laser neutron sources to large-scale laser systems, which typically have maximum repetition rates in the order of a few shots per hour. In this paper, we investigate a potential path to circumvent these limitations by utilizing high repetition rate capable laser wakefield acceleration of electrons to drive a neutron source with high conversion efficiency. Monte Carlo simulations are performed to calculate neutron yields for various electron energies and converter materials, to determine optimal working parameters for an electron-based laser-driven neutron source. The results suggest that conversion efficiencies exceeding 25% can be achieved, depending on the electron energy and converter material. This electron-based approach could provide a neutron source with up to 1011\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{11}$$\\end{document}n/s with state-of-the-art laser sources (ELaser≲1J\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$E_{\ ext {Laser}} \\lesssim {1}\\,{\\rm J}$$\\end{document}, τLaser≲50fs\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ au _{\ ext {Laser}} \\lesssim {50}\\,{\\rm fs}$$\\end{document}, ∼1kHz\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim {1}\\,\ extrm{kHz}$$\\end{document}).

Enhancing athletic performance with complex contrast training: A Delphi study of elite strength and conditioning coaches

This Delphi study identifies how elite strength and conditioning coaches prescribe complex contrast training to team sport athletes. Thirty-eight elite strength and conditioning coaches with experience working in high performance settings participated in a three-round survey. Round one was used to collect open-ended responses regarding the programming of complex contrast training. Responses were formulated into statements for rounds two and three, where participants rated their level of agreement using a 9-point Likert scale (agreement threshold ≥80%). In round one, 139 statements were formulated. Twenty-seven statements reached consensus in round two, and four more in round three. Based upon consensus, complex contrast training is best used during the season and dedicated power blocks. It was recommended that strength and power exercises within complex contrast training pairings be performed for 3–4 sets of 3–4 repetitions. Loading of 85–90% of one repetition maximum (1RM) was recommended for strength exercises, with ∼two repetitions in reserve, and BW–30% 1RM for power exercises, with three minutes of rest between contrast sets. Upper body pressing, upper body throwing, lower body squatting and hinging, and lower body jumping and bounding exercises were recommended. Coaches reported using complex contrast training to enhance power-focused training, and because it is more time efficient. Complex contrast training may be a time efficient method of improving athletic performance when training time is limited. Results from this study can guide the development of complex contrast training programs for team-sport athletes, and provides valuable insight into how elite coaches enhance performance.

Effects of slow dynamic, fast dynamic, and static stretching on recovery of performance, range of motion, balance, and joint position sense in healthy adults

IntroductionConsidering the effects of fatigue on athletic performance and the subsequent increase in the probability of injury, the purpose of this study was to compare the effects of slow dynamic, fast dynamic, and static stretching on the recovery of performance, range of motion (ROM), balance, and joint position sense.MethodsFifteen collegiate healthy females were involved in four separate sessions of slow dynamic stretching (SDS), fast dynamic stretching (FDS), static stretching (SS), and control condition (CC; without stretching), in a random order with at least 48 h of rest between sessions. After warming up, the individuals performed ROM, balance, joint position sense (JPS) maximum voluntary isometric contraction (MVIC) force as well as countermovement (CMJ) and squat jump (SJ) as pre-tests. After performing the knee fatigue protocol of 4 sets of knee extension and flexion at 60% of 1 repetition maximum (RM) to exhaustion (CC; without stretching) or stretching programs (SDS or FDS or SS), the subjects repeated all the tests at post-test 1 (after 5 min) and post-test 2 (after 60 min).ResultsA significantly lower JPS error was detected with SDS while JPS error increased in the SS and control conditions (p < 0.0001). MVIC force significantly increased with SDS and FDS but decreased in control and SS conditions (p < 0.0001). Moreover, a significant decrease in CMJ and SJ height in SS and control conditions was revealed (p < 0.0001). Also, a significant decrease in balance with the control condition was revealed. But only SDS minimized fatigue-induced balance decrements (p < 0.0001). Additionally, the control condition experienced a significant decrease in knee extensor ROM, which contrasted with the significant increase in the quadriceps flexibility with the stretching conditions.ConclusionsThe present results support the idea that SDS may increase quadriceps MVIC force, knee extensor ROM and knee JPS. So according to the present results, it is suggested that the SDS could be implemented and incorporated into a regular recovery program.

Cardiorespiratory and aerobic demands of squat exercise

Squatting, a traditional resistance exercise classified as strength training, relies on anaerobic pathways, but its aerobic aspects remain unclear. We examined heart rate and oxygen demand during squats, exploring variations across different strength statuses. It fills gaps in understanding the cardiorespiratory effects of squatting, especially during multiple sets. Twenty-two young healthy resistance trained men (age: 28 ± 4 years) participated. Maximal oxygen consumption (V̇O2max) and 1 repetition maximum (RM) of squat were measured. Participants performed 5 sets of squat exercises at 65% of 1RM for 10 repetitions with 3-min rest intervals. Heart rate and pulmonary gas exchange were measured during the squat exercise. Participants were divided into high strength (HS; upper 50%) and low strength (LS; lower 50%) groups based on a median split of their 1 RM squat values (normalized to their body weight). During 5 sets of squat exercise, oxygen consumption (V̇O2) increased up to 47.8 ± 8.9 ml/kg/min, corresponding to 100.6% of predetermined V̇O2max. The HS group achieved a greater highest point of V̇O2 in relation to V̇O2max than the LS group (108.0 vs. 93.7%). During the exercise intervals, V̇O2 exceeded V̇CO2, while during the rest intervals, V̇CO2 surpassed V̇O2. Our findings suggest that the oxygen demand during squatting is notably substantial, which may vary according to the training status.

Effects of Progressive and Velocity-Based Autoregulatory Resistance Training on Lower-Limb Movement Ability in Taekwondo Athletes.

Both autoregulatory progressive resistance exercise (APRE) and velocity-based resistance training (VBRT) utilize real-time monitoring of athlete physical performance to adjust training loads to provide appropriate training stimuli. However, the monitoring and adjustment approaches differ between both methods. This study aimed to compare the effects of APRE and VBRT on the muscle strength, power, and agility of college taekwondo athletes. Eight weeks of APRE and VBRT will promote similar results to strength gains in regards maximal strength, but VBRT will be superior to APRE in explosive power and agility. Clinical trial. Level 3. Thirty taekwondo athletes were divided randomly into 2 groups (VBRT/APRE), and all participants completed an 8-week APRE/VBRT intervention. Maximum strength, explosive power, and agility performance were assessed during the squat 1-repetition maximum (1RM), countermovement jump (CMJ), drop jump (DJ), kicking strength test (KST), taekwondo-specific agility test (TSAT), and hexagon test (HT). Highly significant time effects (P < 0.01) were observed for squat 1RM, CMJ, and TSAT in both the APRE and VBRT groups. However, there were no significant group-by-time differences for any of the measured outcomes to intergroup (P > 0.05), but APRE had a small effect size (ES) over VBRT for CMJ (ES = 0.48, = 0.06), TSAT (ES = 0.26, = 0.02), and HT (ES = 0.42, = 0.05). An 8-week autoregulatory APRE and VBRT can both effectively improve both the maximal strength, explosive power, and agility performance of taekwondo athletes, with APRE exhibiting potential advantages in improving CMJ, TSAT, and HT. These results provide important insights into the selection of suitable resistance training programs by professional coaches, taking into account athlete needs, training efficiency, and safety considerations.

Sex differences in intra-set kinematics and electromyography during different maximum repetition sets in the barbell back squat?

Barbell squats are commonly utilized in resistance training for rehabilitation, daily living enhancement, and improving sports performance. The current study investigated the kinematic and electromyographic (EMG) parameters in the squat between sexes across different repetition ranges (1-, 3-, 6-, and 10-RM) among recreationally strength-trained subjects. A total of 26 subjects (13 men: age 25 ± 3.5 years, height 178.2 ± 5.8 cm, weight 82.3 ± 9.1 kg; 13 women: age 24 ± 4.1 years, height 165.4 ± 6.3 cm, weight 68.2 ± 8.7 kg) participated in the study. The level of significance was set at p<0.05. The findings revealed no sex-specific differences in average barbell velocity across repetition ranges. However, the 1-RM showed a significantly lower average velocity compared to the final repetition of other repetition ranges (p<0.001), with the last repetition at 10-RM revealing a significantly higher velocity (p<0.001). Women had greater maximal angular hip extension velocity in the final repetitions of the 6- and 10-RM (p≤0.035, ηp2≤0.20), while both sexes displayed lower maximal angular knee extension velocity in the final repetition of the 10-RM (p = 0.028, ηp2 = 0.15). Moreover, men had lower EMG amplitude in the rectus femoris (3- and 10-RM), soleus, and lateral vastus (10-RM) compared to women (p≥0.011, ηp2≥0.26). It was concluded that 10-RM differed greatly in kinematics and EMG, suggesting different fatigue mechanisms compared to other repetition ranges with heavier loads. Furthermore, sex differences in EMG and angular hip extension velocity might imply sex-specific fatiguing mechanisms during high-repetition squats. These considerations could be important when prescribing training programs.

Can Complex Training Improve Acute and Long-Lasting Performance in Basketball Players? A Systematic Review

Basketball demands a sophisticated blend of tactical, technical, physical, and psychological skills, and various methods have been proposed to prepare players for these demands, including resistance training to enhance strength, power, speed, agility, and endurance. Complex training (CT) integrates diverse strength training methodologies by combining heavy-resistance exercises (e.g., squat at 90% of one repetition maximum) with high-velocity movements or plyometrics, both sharing the same biomechanical pattern. However, the optimal application of CT in basketball remains uncertain due to diverse protocols and a lack of consensus in the literature. The aim of this systematic review was to evaluate the acute and chronic effects of CT interventions on physical fitness performance in basketball players and identify the most effective characteristics of moderators. Methods: A bibliographic search was conducted using PubMed, SCOPUS, and Web of Science databases following the Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines using the PICOS strategy. Results: Fourteen studies met the inclusion criteria, three articles analyzed acute effects, and thirteen analyzed chronic effects. The total number of participants in the studies analyzing acute effects was 50, while for studies examining chronic effects, it was 362. Conclusions: Acutely, CT triggers post-activation potentiation and enhances sprint performance when coupled with brief rest intervals. Over time, these acute improvements contribute to more substantial, long-lasting benefits. Chronic effects of CT improve strength, as evidenced by enhanced 1 RM performance, jumps, sprints, and core muscle strength.

Can isometric testing substitute for the one repetition maximum squat test?

When measuring maximum strength, a high accuracy and precision is required to monitor the training adaptations. Based on available reliability parameters, the literature suggests the replacement of the one repetition maximum (1RM) by isometric testing to save testing time. However, from a statistical point of view, correlation coefficients do not provide the required information when aiming to replace one test by another. Therefore, the literature suggests the inclusion of the mean absolute error (MAE), the mean absolute percentage error (MAPE) for agreement analysis. Consequently, to check the replaceability of 1RM testing methods, the current study examined the agreement of isometric and dynamic testing methods in the squat and the isometric mid-thigh pull. While in accordance with the literature, correlations were classified high r = 0.638-0.828 and ICC = 0.630-0.828, the agreement analysis provided MAEs of 175.75-444.17 N and MAPEs of 16.16-57.71% indicating an intolerable high measurement error between isometric and dynamic testing conditions in the squat and isometric mid-thigh pull. In contrast to previous studies, using MAE, MAPE supplemented by CCC and BA analysis highlights the poor agreement between the included strength tests. The recommendation to replace 1RM testing with isometric testing routines in the squat does not provide suitable concordance and is not recommended.

Kinetics and Kinematics of the Push Press, Push Jerk, and Split Jerk.

Abstract Soriano, MA, Jiménez-Ormeño, E, Lake, JP, McMahon, JJ, Gallo-Salazar, C, Mundy, P, and Comfort, P. Kinetics and kinematics of the push press, push jerk, and split jerk. J Strength Cond Res 38(8): 1359–1365, 2024—The aim of this study was to explore the kinetics and kinematics across incremental loads with the push press (PP), push jerk (PJ), and split jerk (SJ). Eighteen resistance-trained men performed the 1 repetition maximum (1RM) tests (visit 1) 3–7 days before an incremental loading protocol (60, 75, and 90% 1RM) of the 3 exercises (visit 2). Kinetics and kinematics were derived from force-time data and compared using a repeated-measures analysis of variance with load and exercise as within-subject factors. Dependent variables for the biomechanics assessment were categorized as output (power and impulse), driver (force and work), and strategy (displacement and duration) metrics. The interrepetition reliability was assessed using the intraclass correlation coefficient and coefficient of variation. The PP, PJ, and SJ 1RM performance were 89.7 ± 15.4, 95.6 ± 14.4, and 103.0 ± 16.9 kg, respectively. Driver, strategy, and outcome metrics displayed moderate-to-excellent (intraclass correlation coefficient: 0.58–0.98) reliability with acceptable variability (% coefficient of variation: 2.02–10.00). Increased load resulted in significantly large increases in force, work, displacement, duration, power, and impulse (p &lt; 0.001, = 0.534–0.903). Exercise selection had a significant and large effect on power, impulse, work, and force (p &lt; 0.016, = 0.387–0.534). There was a significant and large effect of load × exercise interaction on work, displacement, and duration (p &lt; 0.019, = 0.158–0.220). Practitioners are encouraged to use heavier loads (90 &gt; 75 &gt; 60% 1RM) during the SJ exercise to maximize output, driver, and strategy kinetics and kinematics.

Using Barbell Acceleration to Determine the 1 Repetition Maximum of the Jump Shrug.

Techmanski, BS, Kissick, CR, Loturco, I, and Suchomel, TJ. Using barbell acceleration to determine the 1 repetition maximum of the jump shrug. J Strength Cond Res 38(8): 1486-1493, 2024-The purpose of this study was to determine the 1 repetition maximum (1RM) of the jump shrug (JS) using the barbell acceleration characteristics of repetitions performed with relative percentages of the hang power clean (HPC). Fifteen resistance-trained men (age = 25.5 ± 4.5 years, body mass = 88.5 ± 15.7 kg, height = 176.1 ± 8.5 cm, relative 1RM HPC = 1.3 ± 0.2 kg·kg-1) completed 2 testing sessions that included performing a 1RM HPC and JS repetitions with 20, 40, 60, 80, and 100% of their 1RM HPC. A linear position transducer was used to determine concentric duration and the percentage of the propulsive phase (P%) where barbell acceleration was greater than gravitational acceleration (i.e., a>-9.81 m·s-2). Two 1 way repeated measures ANOVA were used to compare each variable across loads, whereas Hedge's g effect sizes were used to examine the magnitude of the differences. Concentric duration ranged from 449.7 to 469.8 milliseconds and did not vary significantly between loads (p = 0.253; g = 0.20-0.39). The P% was 57.4 ± 7.2%, 64.8 ± 5.9%, 73.2 ± 4.3%, 78.7 ± 4.0%, and 80.3 ± 3.5% when using 20, 40, 60, 80, and 100% 1RM HPC, respectively. P% produced during the 80 and 100% 1RM loads were significantly greater than those at 20, 40, and 60% 1RM (p < 0.01, g = 1.30-3.90). In addition, P% was significantly greater during 60% 1RM compared with both 20 and 40% 1RM (p < 0.01, g = 1.58-2.58) and 40% was greater than 20% 1RM (p = 0.003, g = 1.09). A braking phase was present during each load and, thus, a 1RM JS load was not established. Heavier loads may be needed to achieve a 100% propulsive phase when using this method.

Effects of Different Physical Training Protocols on Metabolic Syndrome Indicators and the Activity of Butyrylcholinesterase in Adolescents: A Randomized Clinical Trial.

Metabolic syndrome (MS) increases the risk of cardiovascular disease and affects children and adolescents. Butyrylcholinesterase (BChE) is an enzyme associated with obesity. The aim of this study was to investigate the effects of different physical training protocols on MS indicators and their relationship with BChE activity. This randomized clinical trial included 80 adolescents randomly assigned to 4 groups (CG: Control Group; ATG: Aerobic Training Group; STG: Strength Training Group; and CTG: Concurrent Training Group). The EFC, lipid profile, glycemia, waist circumference, and blood pressure were analyzed. With the exception of the CG, all the groups underwent training protocols for 12 consecutive weeks, 4 times a week, as follows: (ATG: 75% of heart rate on an electric treadmill; STG: 85% of 1 maximum repetition; CTG: 20 min of aerobic training at the same intensity as the ATG, and 20 min of resistance training in the same way as the STG). The training reduced MS-related biomarkers, such as the lipid profile, glycemia, waist circumference, and blood pressure. STG reduced BChE activity. The training methods led to improvements in the majority of the MS indicators. In addition, aerobic training significantly reduced BChE activity after a 12-week training protocol. The results suggest that different types of exercise can benefit MS.

Effect of home-based tongue-strengthening exercise using a portable tool on oropharyngeal muscles in older adults with sarcopenic dysphagia: A randomised controlled study.

Tongue-strengthening exercises may be used at home to strengthen swallowing-related oropharyngeal muscles in community-dwelling older adults with sarcopenic dysphagia; however, evidence of their effectiveness remains unclear. This study aimed to investigate the effects of a home-based tongue-strengthening exercise (hTSE) using portable tool on swallowing-related oropharyngeal muscles in community-dwelling older adults with sarcopenic dysphagia. Forth community-dwelling older adults with sarcopenic dysphagia were enrolled in the study. The participants were randomly assigned to the experimental and control groups. 1-Repetition Maximum (1-RM) of tongue muscle was measured in the experimental group using the Iowa Oral Performance Instrument, and hTSE was performed using a portable tool with an intensity corresponding to approximately 70%-80% of the range based on the 1-RM value (90 times/day, 5 days/week, for 8 weeks). The control group did not perform any tongue exercises. The primary outcome measures were tongue strength and thickness. The secondary outcome measure was suprahyoid muscle strength (digastric and mylohyoid muscles). The experimental group showed significantly greater increases in suprahyoid muscle (mylohyoid and digastric) thickness (p = .01 and .011, d = 1.0 and .55), as well as tongue strength and thickness (p < .001 and .029, d = 2.2 and .6) than the control group. This study confirmed that hTSE using a portable tool is effective in increasing swallowing-related oropharyngeal muscle activity in older adults with sarcopenic dysphagia. Therefore, hTSE is recommended as an inexpensive, safe, and easy-to-use therapy for sarcopenic dysphagia in older adults.

Acute Inflammatory Response to Eccentric Exercise in Young and Master Resistance-trained Athletes.

This study aimed to compare the acute inflammatory response following high-intensity eccentric exercise between resistance-trained young and master athletes with similar performance levels. Resistance-trained young (n=8; 22±2 years) and master (n=8; 52±4 years) male athletes of a similar performance level performed a standardized high-intensity eccentric squat exercise protocol (10 sets of half-squats at 70% of 1-repetition maximum). The serum concentration of 20 biomarkers related to tissue damage, inflammation, remodeling, and repair was measured at baseline, immediately after exercise, and over a 72 h recovery period. Both groups experienced similar muscle damage as evidenced by a comparable increase in creatine kinase activity 24 h after exercise (p<0.001). Interleukin-6 (p=0.009) and growth hormone (p<0.001) increased immediately post-exercise in both groups. Monocyte chemoattractant protein-1 increased immediately post-exercise only in young athletes (p=0.003) and then decreased 24 h later. There were no significant differences for the remaining variables, including cell markers related to neutrophil/macrophage activation or pro/anti-inflammatory cytokines. Resistance-trained young and master athletes, matched for performance level, showed an overall similar inflammatory response to eccentric exercise, possibly reflecting regulatory mechanisms or immunological adaptations to chronic stimulation in master athletes.

Validation of a commercially available mobile application for velocity-based resistance training.

Velocity-based training (VBT) is commonly used for programming and autoregulation of resistance training. Velocity may also be measured during resistance training to estimate one repetition maximum and monitor fatigue. This study quantifies the validity of Metric VBT, a mobile application that uses camera-vision for measuring barbell range of motion (RoM) and mean velocity during resistance exercises. Twenty-four participants completed back squat and bench press repetitions across various loads. Five mobile devices were placed at varying angles (0, ±10, and ±20°) perpendicular to the participant. The validity of Metric VBT was assessed in comparison to Vicon motion analysis using precision and recall, Lin's concordance correlation coefficient, and Bland-Altman plots. Proportional bias was assessed using linear regression. Metric VBT accurately detected over 95% of repetitions. It showed moderate to substantial agreement with the Vicon system for measuring RoM in both exercises. The average Limits of Agreement (LoA) for RoM across all camera positions were -5.45 to 4.94 cm for squats and -5.80 to 3.55 cm for bench presses. Metric VBT exhibited poor to moderate agreement with the Vicon system for measuring mean velocity. The average LoA for mean velocity were 0.03 to 0.25 m/s for squats and -5.80 to 3.55 m/s for bench presses. A proportional bias was observed, with bias increasing as repetition velocity increased. Metric VBT's wide LoA for measuring RoM and mean velocity highlights significant accuracy concerns, exceeding acceptable levels for practical use. However, for users prioritizing repetition counts over precise RoM or mean velocity data, the application can still provide useful information for monitoring workout volume.

Predicting 1 Repetition Maximum Squat With Peak Force Obtained From Isometric Squat at Multiple Positions.

Tan, WZN and Lum, D. Predicting 1 repetition maximum squat with peak force obtained from isometric squat at multiple positions. J Strength Cond Res 38(9): 1543-1550, 2024-This study investigated whether the use of peak force (PF) obtained from multiple joint positions during isometric squat (IsoSqt) can predict of 1-repetition maximum (1RM) squat with high precision. Twenty-nine male and female resistance-trained athletes (age = 23.0 ± 3.7 years, height = 1.57 ± 0.06 m, body mass = 56.6 ± 9.1 kg, 1RM squat = 104.6 ± 24.2) performed the 1RM squat, and IsoSqt at 60°, 90°, and 120° knee angles on 3 separate occasions. Peak force obtained from IsoSqt at all positions significantly correlated with 1RM squat ( r = 0.684-0.940, p < 0.05). Linear regression analysis based on group data showed r2 = 0.903, based on male data only, r2 = 0.826, and based on female data only, r2 = 0.855. Predicted 1RM squat using linear regression equations based on group, male-only, and female-only data showed nonsignificant differences of 0.02-0.6% from actual 1RM squat ( p = 0.812-0.947, 95% CI = -8.00 to 10.08), with error of estimate of 1.5-2.3%. In addition, Bland-Altman analysis showed a mean bias of -1.04 to 0.35 kg, 95% CI = -10.08 to 8.00 kg. The results showed that using PF obtained from IsoSqt at multiple positions was able to predict 1RM squat with low difference from actual 1RM squat. Furthermore, using linear regression equation derived from gender-specific data was able to predict 1RM squat with higher precision than that based on group data.

Are Load-Velocity Estimates of Bench Press Maximal Strength as Accurate as Actual 1-Repetition Maximum Testing?

Cabarkapa, DV, Fry, AC, Kavadas, NG, and Cabarkapa, D. Are load-velocity estimates of bench press maximal strength as accurate as actual 1-repetition maximum testing? J Strength Cond Res XX(X): 000-000, 2024-The purpose of the present investigation was to determine if using maximal velocity measures while lifting submaximal loads as a predictor of bench press maximal strength (i.e., 1 repetition maximum [1RM]) is more accurate than the actual 1RM test and determine which specific submaximal loads best estimate 1RM bench press strength with the lowest variability when compared with actual 1RM tests. Sixteen recreationally trained subjects performed 5 testing sessions. The first and second sessions included the actual 1RM bench press testing, whereas the remaining 3 sessions consisted of performing one repetition of a bench press exercise in a series of incremental loads, starting at 20% 1RM and increasing the resistance by 10% until reaching the 90% of individual's 1RM. For each participant, linear regressions using bar velocities at each relative load were used to estimate 1RM capabilities, using the predetermined 1RM barbell velocities from actual 1RM testing. The results of the present investigation indicated the following: (a) actual bench press 1RM can be a highly reliable assessment of maximal strength; (b) having a greater number of loads included in the equations increases the accuracy of 1RM estimation; (c) practitioners should incorporate light (e.g., 20% 1RM) and heavy (e.g., 80 and/or 90% 1RM) loads when estimating 1RM from load-velocity profiles; and (d) most load-velocity regression equations for estimating strength are not as accurate as actual 1RM tests for the free-weight bench press. Those who use load-velocity testing to estimate 1RM strength must be willing to accept the accompanying error for most loading protocols.

The Effect of Traditional Strength Training on Sprint and Jump Performance in 12- to 15-Year-Old Elite Soccer Players: A 12-Month Controlled Trial.

Skratek, J, Kadlubowski, B, and Keiner, M. The effect of traditional strength training on sprint and jump performance in 12- to 15-year-old elite soccer players: a 12-month controlled trial. J Strength Cond Res XX(X): 000-000, 2024-The aim of the study was to evaluate the effect of traditional strength training on maximum strength (1 repetition maximum in front squat [FS] and back squat [BS]), jump (squat and countermovement jump), and linear sprint (LS) performance (5, 10, and 30 m) in elite young soccer players. A 12-month longitudinal design was chosen, and 48 elite male youth soccer players (age: 12-15 years) were included. The subjects were divided in 2 groups (a strength training group [STG] and a control group [CG]). The intervention group trained for 1 year over a competitive soccer season with additional sessions to their regular soccer practice (4 sessions per week), while the CG did not complete any additional sessions to the regular soccer training (4 sessions per week). The additional strength training (2 sessions per week [each approximately 30 minutes]) consisted of either parallel FS or BS. The squat variants switched in each session. Data were analyzed using a 2 × 3 (group × time) repeated-measures analysis of variance. The main findings of this study were that the STG resulted in significant pretest and post-test improvements in maximum strength (d = 3.75-5.58), jump (d = 0.84-1.14), and LS performance (d = -0.25 to 0.44), while for the CG, smaller increases or performance decreases were measured (maximum strength: d = 1.64-2.7; jump: d = 0.12-0.31; sprint: d = 0.00-025). A significant interaction effect in all variables indicated significant (p < 0.05) stronger performance improvements compared with the CG. Traditional strength training in elite youth soccer players is recommended to increase strength and speed-strength (jump and sprint performance) and should be considered in long-term athletic development programs.