Fiber Core Research Articles

Net 30 Tb/s bidirectional IM/DD optical interconnect over 19-core fiber enabled by WDM uplink/downlink twin-SSB PAM-4 transmission

Net 30 Tb/s bidirectional IM/DD optical interconnect over 19-core fiber enabled by WDM uplink/downlink twin-SSB PAM-4 transmission

Drug-Eluting and Antibacterial Core-Shell Polycaprolactone/Pectin Nanofibers Containing Ti3C2Tx MXene and Medical Herbs for Wound Dressings.

Fibrous scaffolds capable of delivering natural drugs and herbs show great promise for tissue regeneration and wound care, particularly in personalized medicine. This study presents the fabrication and characterization of drug-eluting antibacterial core-shell mats composed of polycaprolactone (PCL) and pectin nanofibers produced through coaxial electrospinning. Berberine chloride (BBR), an herbal compound with antineoplastic, anti-inflammatory, antilipidemic, and antidiabetic properties, served as the model drug. Poly(vinyl alcohol) (PVA) was blended with pectin to enhance the mechanical properties of the core fibers. The shell was modified with two-dimensional Ti3C2Tx (MXene) nanosheets and subjected to covalent and ionic cross-linking. Structural analysis confirmed the successful production of bead-free fibers with diameters ranging from 160 to 350 nm, depending on composition. The PCL core fibers were uniformly coated with a pectin/PVA shell approximately 90 nm thick. The inclusion of BBR and MXene increased the fiber diameter. Drug-release kinetics, modeled by using Korsmeyer-Peppas, revealed a two-stage release mechanism. An initial burst release occurred within the first 24 h (kinetic exponent n = 1.36), followed by sustained release over 2 weeks (n = 0.48). The release mechanisms were identified as case-II relaxational release in the first stage, transitioning to quasi-Fickian diffusion in the second. Incorporating MXene into the shell further prolonged drug release. The mechanical strength of the scaffolds improved significantly by a factor of 7 and 4 in wet and dry conditions, respectively. In vitro biocompatibility assays using L929 cells demonstrated excellent cell attachment and compatibility. Additionally, antibacterial tests against Escherichia coli showed that the inclusion of MXene enhanced antibacterial activity by 30%. These results suggest that the functional biocomposite scaffolds hold the potential for developing innovative, drug-eluting wound dressings.

Mid‐Infrared Sensing Using a Hollow–Core Fiber in a Nonlinear Interferometer

AbstractIncreasing the interaction path length is a well‐known method for enhancing the sensitivity of the optical detection system. Hollow–core fibers (HCFs) represent a viable alternative to the traditional multi‐path cells offering low optical losses and strong confinement of the optical field. Here, the incorporation of an Antiresonant Hollow–core Fiber (AR‐HCF) section into a nonlinear interferometer, where the AR‐HCF section serves as a gas‐sensing cell operating in the IR range is presented. By exploiting the effect of nonlinear interference, the detection is brought into the more operation‐friendly visible range. The detection of methane (CH4) gas at mid‐IR wavelengths within a half‐meter section of AR‐HCF, with an estimated concentration accuracy of 200 ppm·m is demonstrated. These results represent the combination of two research fields within a single instrument and pave the way for further advancement of quantum‐inspired gas sensing techniques.

Femtosecond laser-inscribed in-fiber Mach-Zehnder interferometer for ultra-sensitive small-angle torsion measurement

We propose and demonstrate a novel in-fiber Mach-Zehnder interferometer (MZI), using a femtosecond (FS) laser to inscribe two parallel straight waveguides along both sides of the core-cladding boundary of an optical fiber. Both simulations and experiments demonstrated that constructing a second straight waveguide (WG2) on the opposite side of the fiber core significantly enhances the mode coupling efficiency in fiber, resulting in ultra-sensitive small twist-angle torsion measurement by intensity interrogation. By finely adjusting the waveguide spacing between the WG2 and the fiber core during the FS fabrication process, a large tuning range of ∼ 200 nm for the designable interference wavelength with maximal fringe contrast has been achieved. Through comparative experiments, the proposed in-fiber MZI performs ultra-sensitivity with 17417.92 dB/(rad/mm) over small twist angles from −10° to 0° for the sample “WG1-4/WG2-4” and 19480.57 dB/(rad/mm) over small twist angles from 0° to 10° for the sample “WG1-4/WG2-6”. Besides, the device is insensitive to temperature and strain. The exhibited advantages of high sensitivity, high reproducibility, and low crosstalks promote the proposed in-fiber MZI to be applied in future industrial engineering monitoring and intelligent health monitoring.

Time domain spectral LiDAR enabled by cascaded Raman in a hydrogen-filled fiber transmitter

We introduce what we believe to be novel spectral light detection and ranging (LiDAR) architectures that enable ultra-compact systems by a transition from spectral signal processing in space (gratings) to processing in time. The architectures leverage temporal dispersion and the unique spectro-temporal waveforms produced from the cascaded Raman scattering generated in the (H2) filled hollow core fiber. The characterized Raman source yields as many as six Raman orders from 1.06-1.70 μm; their unique spectro-temporal waveforms are measured. System performance simulations based on measured Raman waveforms show that high accuracy measurement of range and reflectivity are possible with proper selection of signal-to-noise ratio and detector bandwidth. Materials classification analysis based on the system performance analysis shows that near-optimal classification is feasible with time domain processing.

Reflective High-Sensitivity Humidity Sensor Based on Single Mode-No Core-Seven Core Fiber Structure

Reflective High-Sensitivity Humidity Sensor Based on Single Mode-No Core-Seven Core Fiber Structure

Efficient Soliton Spectral Shifting in the 1-km Long Hollow Core Fiber With Nested Capillaries

Efficient Soliton Spectral Shifting in the 1-km Long Hollow Core Fiber With Nested Capillaries

Lossy Mode Resonance Optical Fiber Enhanced by Electrochemical-Molecularly Imprinted Polymers for Glucose Detection.

Noninvasive glucose sensors are emergent intelligent sensors for analyzing glucose concentration in body fluids within invasion-free conditions. Conventional glucose sensors are often limited by a number of issues such as invasive and real-time detection, creating challenges in continuously characterizing biomarkers or subtle binding dynamics. In this study, we introduce an efficient lossy mode resonance (LMR) optical fiber sensor incorporating the molecularly imprinted polymers (MIPs) to amplify glucose molecules. A molecularly imprinted recognition platform is created on an LMR sensor surface through a convenient one-step electrochemical (EC) polymerization method, in which 3-Aminophenylboric acid and glucose serve as the functional monomer and template molecule, respectively. LMR resonance wavelength shift induced by the coupling of the optical lossy mode and the fiber core mode is employed as the parameter to characterize biomolecules. Due to its high sensitivity to surrounding environment changes, a limit of detection (LOD) of 4.62 × 10-2 μmol/L for glucose can be achieved by this optical fiber sensor. Additionally, the prepared EC-MIPs LMR sensor is capable of detecting glucose molecules in human saliva samples with high accuracy, endowing its potential for practical applications.

Multi-core hollow core fibre

Multi-core hollow core fibre

Mathematical model for highly sensitive photonic crystal fiber sensor based on hyperbolic black holes

In this paper, the photonic crystal fiber sensor based on the geometry of hyperbolic black holes is proposed. As the hyperbolic black hole concentrates the electromagnetic radiation in its powerful gravitational field, the designed sensor has resulted in the concentration of the most electromagnetic field in the core of fiber. The extraordinary sensitivity of the sensor is due to the topology and exact geometry, which originates from the idea of the black hole. All the parameters related to the geometry of the structure are optimized by the Nelder-Mead algorithm, also, a unique three variable equation for the behavior of the structure is provided, which allows obtaining the possible errors due to the construction based on the geometry of the structure. In addition, the calculated equation leads to saving the simulation time. The proposed sensor has an amplitude sensitivity of 4650 (RIU-1) and wavelength sensitivity of 7000 (nm/RIU) and covers a wide range of refractive indices (1.31–1.42) in the bio and chemical range. Because of the amazing options that represent the functionality of the sensor, its construction is highly recommended.

Investigations on opportunities and challenges of brilliant high-power laser beam welding with 24 kW and adjustable power distribution for different materials

Solid-state laser beam sources offer the possibility of generating high-brilliance laser beams with low expansion and high usable intensity at the focal point. New approaches include beam shaping with the use of core and ring fiber and, therefore, variable power distribution in the laser beam focal point and material interaction area. Particularly, high-power laser beam welding benefits from beam shaping because of the stabilizing effect on the weld pool. Furthermore, the technical progress achieved with regard to beam quality also allows one to achieve high Rayleigh lengths and, therefore, a more uniform beam diameter over the whole material thickness. In this study, investigations on high-power laser beam welding with a 24 kW disk laser beam source are conducted for three different materials (mild steel, aluminum alloy, and copper), which are of high interest for welding in different sectors. The influence of power distribution between the core and the ring as well as welding speed on weld geometry (depth and width), weld pool stability, and the resulting weld seam quality is investigated. It is shown that the welding process cannot just be scaled up in comparison with welding with lower laser beam power but has its own challenges. It is possible that high welding depths (12 mm for copper, more than 12 mm is possible for aluminum, and 25 mm for mild steel) could be achieved in one pass. To achieve this, aluminum needs the lowest energy per unit length per mm of sheet thickness and copper the highest.

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

In this work, we propose a fiber Bragg grating (FBG)-based sensor for curvature measurements. Two gratings are inscribed through the protective coating in a specialty optical fiber using focused femtosecond laser pulses and point-by-point direct writing technology. One grating is inscribed on the central core adjacent to an air channel, while the other is inscribed on the eccentric core. The bending characteristics of the two-core fiber strongly depend on the bending direction due to the asymmetry of the fiber cores. A bending sensitivity of 58 pm/m−1 is achieved by the FBG in the eccentric fiber core over the curvature range of 0–50 m−1 . Temperature and humidity cross-sensitivity could be significantly reduced by analyzing the differences in peak shifts between the two gratings. The sensor features a large sensing range and good robustness due to the presence of its protective buffer coating, which makes it a good candidate for curvature sensing in engineering fields.

Optimizing energy absorption and peak force in metal/glass fiber sandwich panels with trapezoidal cores

Sandwich panels with trapezoidal metal/glass fiber cores are increasingly popular due to their lightweight and energy-absorption properties. This study employs response surface methodology (RSM) and Box-Behnken design to investigate the effects of core angle, fiber orientation, and MCM-48 nanoparticles on the panels’ energy absorption and peak force, developing regression models with high R2 values of 0.9027 and 0.9228, respectively. Experimental tests were conducted to validate these models, showing minimal deviation from predicted values. Results indicate that increasing the fiber orientation angle from 30° to 90° enhances energy absorption and peak force by 72.18 and 46.9%, respectively, and adding MCM-48 nanoparticles up to 0.25% weight improves energy absorption by 60.8%. A core angle of 52° balances energy absorption and peak force, while integrating a metal wire mesh within the panels significantly enhances energy absorption and reduces core brittleness. The optimal parameters for maximum energy absorption and minimum peak force include a core angle of 58°, fiber orientation of 73.5°, and no nanoparticles. These findings provide valuable insights into the design and optimization of sandwich panels for various applications.

10 W, 2 mJ-level ns all-fiber amplifier at 2.8 µm.

In this Letter, we demonstrate a single-stage erbium-doped fluoride fiber amplifier composed of two spliced large core fibers with respective diameters of 85 and 130 µm. An optical parametric generator (OPG) operating at a 5 kHz repetition rate, and providing ∼2 ns pulse duration, and an average output power of 500 mW at a wavelength of 2.8 µm was used as a seed source. This nanosecond amplifier configuration achieved an average output power of 10 W with a record pulse energy of 2 mJ, corresponding to 1 MW of output peak power. The maximum slope efficiency of this hybrid amplifier is 21% with respect to the total incident pump power at 940 nm. The presented master-oscillator power-amplifier (MOPA) configuration shows its potential for further power and energy scaling.

Optical Fiber HMS Ammonia Sensor with Cellular-like N-CQDs/MgxZn1-xO at Room Temperature.

This paper presents an optical fiber hollow malposition structure (HMS) elaborated with cellular-like N-CQDs/MgxZn1-xO for detecting ammonia (NH3) at room temperature. The gas detection was realized by combining the HMS to excite the surface evanescent field on the outer surface of the hollow core fiber (HCF) and the surface-coated cellular-like N-CQDs/MgxZn1-xO material for improving sensitivity. Experimental results demonstrate that the sensor coated with N-CQDs/Mg0.2Zn0.8O exhibits the highest sensitivity, reaching 8.9 pm/ppm, which is 11.6 times higher than that with Mg0.2Zn0.8O. Additionally, the NH3 sensor can determine a minimum concentration of 1 ppm and has response and recovery times of 6.2 and 7.1 s, respectively. Density functional theory (DFT) calculations confirm that N-CQDs reduces the bandgap of the composite material and increase the carrier concentration on its surface, thereby enhancing gas adsorption capacity. The intrinsic characteristics of the proposed sensor including small size, high sensitivity, and good stability reveal its promising prospects in detecting low concentrations of NH3.

Ultrafast and Reproducible Fiber-Optic Hydrogen Sensor via a Tilted Fiber Grating With Pd/WO3 Nanocoating

Hydrogen, a high-density and clean energy, has been widely used in various critical applications. However, the safety risk caused by hydrogen leakage during storage and transportation is still a non-negligible issue. Therefore, it is necessary to offer hydrogen sensors with fast response and high repeatability, and it will be perfect for achieving in situ monitoring over the lifecycle of hydrogen production and utilization. Here, we propose a compact optical fiber sensor with a short section of the tilted Bragg fiber grating (TFBG) inscribed in the fiber core and a palladium and tungsten trioxide (Pd/WO3) combined film of 40 nm thickness over the fiber surface. The TFBG excites tens of narrow cladding resonances, part of which possess refractive indexes matching that of the Pd/WO3 coating and providing the high sensitivity to the surrounding hydrogen concentration change. The sensor offers improved sensing characteristics, including the fast response time (less than 10 s), high repeatability (over tens of measurement), and excellent linear response (higher than 99.6%) over the 0% to 3% concentration range.

All-optical image transmission through dynamically pertured multimode fiber and ring core fiber using diffractive deep neural networks

All-optical image transmission through dynamically pertured multimode fiber and ring core fiber using diffractive deep neural networks

Highly Amplified Broadband Ultrasound in Antiresonant Hollow Core Fibers

High‐frequency broadband ultrasound in nested antiresonant hollow core fibers (NANFs) is investigated for the first time. NANFs have remarkable features enabling high‐resolution microscale optoacoustic imaging sensors and neurostimulators. Solid optical fibers have been successfully employed to measure and generate ultrasonic signals, however, they face issues concerning attenuation, limited frequency range, bandwidth, and spatial resolution. Herein, highly efficient ultrasonic propagation in NANFs from 10 to 100 MHz is numerically demonstrated. The induced pressures and sensing responsivity are evaluated in detail, and important parameters for the development of ultrasonic devices are reviewed. High pressures (up to 234 MPa) and sensing responsivities (up to −207 dB) are tuned over 90 MHz range by changing the diameters of two distinct NANF geometries. To the best of knowledge, this is the widest bandwidth reported using similar diameter fibers. The results are a significant advance for fiber‐based ultrasonic sensors and transmitters, contributing to improve their efficiency and microscale spatial resolution for the detection, diagnosis, and treatment of diseases in biomedical applications.

Solution Doping of PMMA-Based Step-Index Polymer Optical Fibers by Rhodamine B Near Glass Transition Temperature of PMMA

Solution doping is a facile approach to fabricating photoactive polymer optical fibers (POFs). However, previous studies reveal that only the cladding of step-index POFs can be doped by the solution doping method in methanol or aqueous solutions, whereas the fiber core is hardly doped. To dope the fiber core as well as the cladding, this study attempts to dope PMMA-based step-index POFs by raising the doping temperatures to near the Tg of PMMA. The results show that a considerable amount of rhodamine B (RhB) is doped in the fiber core, though the amount is still much less than that in the cladding. The highest content in the fiber core is 0.479 mg/g, which is achieved by doping the POFs in water at 110 °C for 8 h. At the same condition, the RhB content of the cladding is 11.5 mg/g. It is found that the high-temperature doping process leads to dramatic axial shrinkage and radial expansion of the POFs, due to the relaxation of the fiber core. The wrinkled cladding after doping suggests that the macromolecule orientation of the core is much higher than that of the cladding, and high orientation should be the main reason why the core is much more difficult to dope than the cladding. Additionally, the doping process at 90 °C in water does not increase the fiber loss regardless of the tremendous POF structure change. In short, the core of PMMA-based step-index POFs can be doped at a temperature near the Tg of the PMMA, making the solution doping technique more practicable for POF doping.

Reconstructing confidence: Fiber reinforced reattachment of a fractured maxillary lateral incisor – A clinical case report

AbstractA broken smile can be more than just a physical injury—it can impact self-esteem and confidence. This case highlights the successful reattachment of a fractured upper front tooth in a 32-year-old female following a recent fall. The comprehensive treatment strategy involved immediate root canal therapy to relieve pain, followed by a gingivectomy and osteotomy to correct the subgingival fracture and restore the biologic width. Advanced techniques, including fiber post and core reconstruction reinforced with ribbond fiber, were used to stabilize and support the tooth structure. The final touch is done with a layer of composite for optimal function and aesthetics. This holistic approach not only revived the patient's smile but also rejuvenated her confidence and psychological well-being.