5G Wireless Systems Research Articles

Channel measurement and characterisation for 5G multi‐scenarios at 26 and 38 GHz

AbstractMillimetre‐wave (mmWave) frequencies play a vital role in fifth‐generation (5G) wireless systems and beyond due to the vast available bandwidth of several GHz. This paper presents channel characteristics and their channel models for mmWave based on extensive channel measurements at 26 and 38 GHz conducted in 5G scenarios, such as the rooftop, the high‐speed railway, and the Industrial Internet of Things scenarios. The channel sounder receiver (Rx) uses an omnidirectional or phased array antenna to meet the requirements of channel measurement, such as recording absolute delay and obtaining 3‐dimensional angular information. We use the classical close‐in model and floating‐intercept model to model path loss. Meanwhile, channel statistics in the delay domain are derived from the measured power delay profiles. Note that the different scenarios are measured with the same channel sounder, making the measurement results of different scenarios comparable. It is shown that the shadow fading parameter σ is 0.7 dB as fewer large scatterers exist in the rooftop scenario. Moreover, due to the significant dependence of delay spread on the geometric relationship between the transmitter (Tx), Rx, and surrounding environment, the statistical data in the delay domain varies significantly in different scenarios. The channel characteristics and models will guide future air‐interface, beamforming, and transceiver designs for 5G and beyond.

Future of 5G Wireless System

Every major telecom in the globe is attempting to make it even faster because everyone loves speed and, more specifically, fast internet. Smartphone’s, Stable internet connections are becoming more and more important for watches, houses, and vehicles. The fifth generation of technology, or 5G, is coming to help us survive in a world where pace is changing every second and where we need more and more technology. Some of the most important goals that must be achieved in the future, or in a world beyond 4G, are higher capacity, improved data rate, lower latency, and quality service. Large-scale improvements in the 5G cellular architecture are necessary to meet these expectations. Essentially, this study emphasizes the architecture of the fifth generation (5G) of mobile networks and some of the most important upcoming technologies that can help meet user demands while humanizing the architecture. The primary focus of this paper's coverage of 5G details is device-to-device communication and huge multiple input multiple output technologies (D2D). A general, believable 5G cellular network architecture is put out using guidelines from online sources and thorough research on the subject

The Future of 5G Wireless Systems in India

The Future of 5G Wireless Systems in India

Spatial Multiplexing and Hybrid Beamforming Design For 5G Wireless System

Spatial Multiplexing and Hybrid Beamforming Design For 5G Wireless System

Technology Trends for Massive MIMO towards 6G.

At the dawn of the next-generation wireless systems and networks, massive multiple-input multiple-output (MIMO) in combination with leading-edge technologies, methodologies, and architectures are poised to be a cornerstone technology. Capitalizing on its successful integration and scalability within 5G and beyond, massive MIMO has proven its merits and adaptability. Notably, a series of evolutionary advancements and revolutionary trends have begun to materialize in recent years, envisioned to redefine the landscape of future 6G wireless systems and networks. In particular, the capabilities and performance of future massive MIMO systems will be amplified through the incorporation of cutting-edge technologies, structures, and strategies. These include intelligent omni-surfaces (IOSs)/intelligent reflecting surfaces (IRSs), artificial intelligence (AI), Terahertz (THz) communications, and cell-free architectures. In addition, an array of diverse applications built on the foundation of massive MIMO will continue to proliferate and thrive. These encompass wireless localization and sensing, vehicular communications, non-terrestrial communications, remote sensing, and inter-planetary communications, among others.

Outage probability analysis of multiple intelligent reflecting surface‐assisted single‐input single‐output system with switched diversity

SummaryIn this paper, we have presented the outage probability analysis of multiple intelligent reflecting surface (IRS)‐assisted single‐input‐single‐output (SISO) system with switched diversity schemes. The switched diversity is simpler than the selection combining diversity technique, which can help in reducing the channel estimation overhead. There are two main types of switch diversity schemes, namely, switch and stay combining (SSC) and switch and examine combining (SEC). We consider a SISO wireless scenario in which a single transmitting antenna is sending its message to the receiving antenna with the aid of multiple IRS panels. This communication scenario will arise as a typical application of uplink scenario for future 6G wireless systems. The outage probability (OP) expressions for dual‐IRS‐panel‐aided SSC system and multiple‐IRS‐panel‐aided SEC system are analyzed, respectively, over Rician fading channels. We derive tight approximate OP expressions in closed form for a large number of IRS elements. Further, we derive a simple asymptotic OP for studying diversity order and coding gain. The OP performance with respect to each system parameter is thoroughly explored. Several numerical OP results are presented with corresponding simulated OP results to validate the accuracy of the presented analytical analysis.

Workload Characterization and Traffic Analysis for Reconfigurable Intelligent Surfaces Within 6G Wireless Systems

Programmable metasurfaces constitute an emerging paradigm, envisaged to become a key enabling technology for Reconfigurable Intelligent Surfaces (RIS) due to their powerful control over electromagnetic waves. The HyperSurface (HSF) paradigm takes one step further by embedding a network of customized integrated circuit (IC) controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that the network needs to support as the target electromagnetic function or boundary conditions change. In this paper, the framework of a methodology is introduced to characterize the workload of programmable metasurfaces which is then used to analyze the beam steering HSFs. The workload characterization leads to many useful insights into traffic behavior, including the spatio-temporal load incurred and the HSF limitations in terms of fine-grained tracking of moving targets. It is observed that the traffic is inherently bursty with an uneven spatial distribution of load and that finer resolution comes at the cost of an increased but less bursty load. An indoor mobility model indicates reasonable signaling load on the deployed surfaces. Finally, a statistical analysis on the traffic patterns is performed, showing that the incoming traffic can be well represented by an ON-OFF model.

The Future of 5G Wireless System

The fifth- generation(5G) wireless system is anticipated to bring a paradigm shift in the way we communicate, work, and live. It offers unequaled speed, low quiescence, massive connectivity, and high trustability, which will enable a range of new operations and services similar as independent driving, remote surgery, smart homes, and Assiduity4.0. still, the deployment of 5G also poses significant specialized, profitable, and social challenges, similar as the need for massive structure investment, diapason allocation, security and sequestration enterprises, and ethical issues. In this paper, we review the state of the art of 5G technology, punctuate its implicit benefits and downsides, and bandy the openings and challenges that lie ahead. We also explore the implicit impact of 5G on colorful diligence and society, and suggest some unborn exploration directions

A Comprehensive Review on NOMA Assisted Emerging Techniques in 5G and Beyond 5G Wireless Systems

A Comprehensive Review on NOMA Assisted Emerging Techniques in 5G and Beyond 5G Wireless Systems

Comparison of different New Radio (NR) waveforms for wireless communications.

New Radio (NR) waveforms of existing wireless communication systems need further improvement in order to support future wireless communications. NR is the radio interface technology proposed by the 3rd Generation Partnership Project (3GPP) for 5G. Prototype Filter (PF) of NR plays a vital role in performance improvement of wireless systems. NR waveforms can adapt in a better way to different channel conditions. Some of the NR filtering techniques are Filtered-OFDM (F-OFDM), Filter Bank Multi-Carrier (FBMC), and Universal Filtered Multi-Carrier (UFMC). NR waveforms require performance improvement when high reliability, massive connectivity, lower power consumption, and time-critical applications are required. Areas of improvement are Power Spectral Density (PSD), Bit Error Rate (BER), Signal to Interference Ratio (SIR), Doppler Diversity, and Peak to Average Power Ratio (PAPR). This paper compares different performance parameters of Filtered-OFDM, FBMC, and UFMC using existing proto-type filters and novel proto-type filters. The novel and better PFs, described in the paper, were proposed first time by the authors and his research group. Proposed novel prototype filters for FBMC, Filtered-OFDM, and UFMC are respectively Binomial filter and Fractional Powered Binomial Filter (FPBF). With FPBF based OFDM, PSD improvement was 97.5 dB, and BER improvement was 0.07 at 0 dB SNR. With Binomial filter based FBMC, OOBE improvement was 19.7 dB and BER improvement was 0.03 at 0 dB SNR. PAPR improvement with Binomial filter based FBMC was 1.16 dB at 64-QAM and 1.1 dB at 256-QAM. With FPBF based UFMC, improvement of interference level was 122 dB within 3rd~52th sub-bands due to 1st sub-band. BER improvement was 0.09 at 0 dB SNR. SIR improvement was 5. 27 dB with 15 KHz sub-carrier spacing and 16.55 dB with 30 KHz sub-carrier spacing of UFMC. Novel NR filters, discussed in the paper, are good candidates for future 6G wireless systems.

Filtered OFDM System Improvement Using Hamming Code

Orthogonal Frequency Division Multiplexing (OFDM) technique is widely adopted for broadband Forth Generation (4G) wireless communication systems at present, owing to its ability to combat multi-path interference. Nevertheless, it suffers from a large Peak to Average Power Ratio (PAPR) and Out Of Band Emission (OOBE), making it unsuitable for a high-speed transmission system. On the other hand, the Filtered-OFDM (f-OFDM) system is suggested to overcome the traditional OFDM system's disadvantages and maintain its advantages. Nowadays, the developments and growing communications systems are rapid, especially on their applications such as wireless networks, internet, satellite communications, mobile telephony, etc. This increases the demand for raising the bit rates with decreasing power consumption and the bit error rates (BER). In this paper, Hamming codes are proposed to improve the f-OFDM system performance, while the presence of the subband filter in system architecture could decrease the values of OOBE than the familiar OFDM system. The outcomes showed that utilizing interleaver with Hamming code considerably improves the proposed system performance, while the OOBE values were lower than the conventional OFDM system.

Scattering and Eavesdropping in Terahertz Wireless Link by Wavy Surfaces

Wireless communication at terahertz (THz) frequencies is viewed as one of the potentials for future 6G wireless systems. However, the path of secure data transmission by THz links is facing many complex challenges. Of that, scattering-induced eavesdropping threat remains one of the most critical but less explored. With the updating of carrier frequency into the THz range, the wavelength becomes comparable to the surface roughness of typical objects in our daily life. Surface scattering, which is negligible in current wireless networks, becomes serious and would lead to desperate signal eavesdropping. For a non-line-of-sight (NLOS) link achieved by surface reflection, how does the scattering affect link security at the physical layer? Such direct information is crucial for the inspection of security threats and proposing of possible solutions. Using metallic wavy surfaces, we characterize possibilities of signal eavesdropping caused by bistatic scattering, by several unmodulated channels at different frequencies. We also demonstrate a real-time data transmission for this eavesdropping configuration, with a data rate of 4 gigabits/s by 16 quadrature amplitude modulation. We observe that successful signal interception from an NLOS link happens, even when transceiver designs incorporating backscatter measures are considered. This is likely to be a common security threat for any THz communication systems in which NLOS channels are employed to achieve wider user coverage.

Joint Method of Moments (JMoM) and Successive Moment Cancellation (SMC) Multiuser Time Synchronization for ZP-OFDM-Based Waveforms Applicable to Joint Communication and Sensing

It has been recently shown that zero padding (ZP)-orthogonal frequency-division multiplexing (OFDM) is a promising candidate for 6G wireless systems requiring joint communication and sensing. In this paper, we consider a multiuser uplink scenario where users are separated in power domain, i.e., non-orthogonal multiple access (NOMA), and use ZP-OFDM signals. The uplink transmission is grant-free and users are allowed to transmit asynchronously. In this setup, we address the problem of time synchronization by estimating the timing offset (TO) of all the users. We propose two non-data-aided (NDA) estimators, i.e., the joint method of moment (JMoM) and the successive moment cancellation (SMC), that employ the periodicity of the second order moment (SoM) of the received samples for TO estimation. Moreover, the coding assisted (CA) version of the proposed estimators, i.e., CA-JMoM and CA-SMC, are developed for the case of short observation samples. We also extend the proposed estimators to multiuser multiple-input multiple-output (MIMO) systems. The effectiveness of the proposed estimators is evaluated in terms of lock-in probability under various practical scenarios. Simulation results show that the JMoM estimator can reach the lock-in probability of one for the moderate range of Eb/N0 values. While existing NDA TO estimators in the literature either offer low lock-in probability, high computational complexity that prevents them from being employed in MIMO systems, or are designed for single-user scenarios, the proposed estimators in this paper address all of these issues.

Future of 5G Wireless Systems: A Review

Everybody loves speed and moreover speedy internet, so it’s no surprise that every major telecom in the world is working to make it even faster. Smartphone’s, watches, homes, and cars are increasingly requiring stable internet connections. In order to survive in the world where in
 every second the speed changes and where we urge for more and more technology, here comes the fifth generation technology: 5G. In future, i.e., a world beyond 4G, some of the prime objectives that need to be fulfilled are increased capacity, improved data rate, decreased latency, and quality service. To meet these demands, large scale improvement in the cellular architecture of 5G is required .This paper basically lays emphasis on the 5th generation i.e. 5G cellular network architecture and some of the essential emerging technologies that can prove fruitful in humanizing the architecture and summiting the demands of users.
 This paper is contented with the details related to 5g with the prime focus on the massive multiple input multiple output technology and device-to-device communication (D2D). A general credible 5G cellular network architecture is being proposed with the guideline taken from the internet books and by the detailed study of the topic.
 Beginning with an exploration of the evolution from 4G to 5G, we dissect the technical intricacies that empower 5G networks, including spectrum allocation, massive MIMO, and network slicing.
 The paper navigates through the diverse spectrum of applications that 5G facilitates, from Enhanced Mobile Broadband (eMBB) .As 5G integrates with emerging technologies such as edge computing and artificial intelligence, we unravel the synergies that are reshaping industries and fostering innovation.

5G Frequency Standardization, Technologies, Channel Models, and Network Deployment: Advances, Challenges, and Future Directions

The rapid increase in data traffic caused by the proliferation of smart devices has spurred the demand for extremely large-capacity wireless networks. Thus, faster data transmission rates and greater spectral efficiency have become critical requirements in modern-day networks. The ubiquitous 5G is an end-to-end network capable of accommodating billions of linked devices and offering high-performance broadcast services due to its several enabling technologies. However, the existing review works on 5G wireless systems examined only a subset of these enabling technologies by providing a limited coverage of the system model, performance analysis, technology advancements, and critical design issues, thus requiring further research directions. In order to fill this gap and fully grasp the potential of 5G, this study comprehensively examines various aspects of 5G technology. Specifically, a systematic and all-encompassing evaluation of the candidate 5G enabling technologies was conducted. The evolution of 5G, the progression of wireless mobile networks, potential use cases, channel models, applications, frequency standardization, key research issues, and prospects are discussed extensively. Key findings from the elaborate review reveal that these enabling technologies are critical to developing robust, flexible, dependable, and scalable 5G and future wireless communication systems. Overall, this review is useful as a resource for wireless communication researchers and specialists.

A near spurious-free 6 GHz LLSAW resonator with large electromechanical coupling on X-cut LiNbO3/SiC bilayer substrate

The fast development of the fifth-generation (5G) wireless systems and substantial growth of data usage have imposed stringent requirements for high-frequency and wideband radio frequency devices. Here, it is reported on a longitudinal leaky surface acoustic wave (LLSAW) mode acoustic resonator with a large electromechanical coupling factor (kt2), high operating frequency, and efficient spurious suppression. Through systematical finite element method simulations, available design spaces such as supporting substrate, propagation angle, and lithium niobate (LN) thickness have been fully investigated with the aim of stimulating the intended LLSAW and suppressing spurious modes concurrently. Optimization results reveal that the LLSAW mode wave propagating in X-35°Y LN/SiC piezoelectric-on-insulator (POI) bilayer structure possesses a large kt2 without significant interference from other spurious modes. To verify the theoretical analyses, LLSAW resonators were fabricated and exhibited a near spurious-free response with the operating frequency over 6 GHz, and kt2 as large as 22.7%. This work demonstrates a high-performance LLSAW resonator on the POI platform with a simple prototype as well as potentially providing a high-frequency filtering solution for 5G applications in the 6-GHz spectrum.

A Review of Integrated Systems and Components for 6G Wireless Communication in the D-Band

The evolution of wireless communication points to increasing demands on throughput for data-intensive applications in modern society. Integrated millimeter-wave systems with electrical beam-steering capabilities are promising candidates for wireless technologies of the future and are currently the subject of widespread academic and commercial research. The <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$D$ </tex-math></inline-formula> -band, ranging from 110–170 GHz, offers high aggregate bandwidths (BWs), low atmospheric absorption, and multi-GHz operation at amenable fractional BWs. It, therefore, has the potential to foster efficient, highly integrated wireless-communication systems with data rates approaching 100 Gb/s. This article reviews all aspects of hardware integration against the backdrop of an extensive literature review and outlines the challenges and possible solutions for practical 6G wireless systems in the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$D$ </tex-math></inline-formula> -band. To this end, this article covers a number of related topics in depth, which includes system definition, possible radio architectures and array configurations, the scope and potential of integrated circuit (IC) technologies, the design and characterization of key circuit blocks, advances in antenna and packaging technologies for high-frequency systems, and an overview of measurement techniques currently employed at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$D$ </tex-math></inline-formula> -band frequencies. A system-level study based on radio-link simulations of different single-carrier quadrature amplitude modulation (QAM) schemes is presented, which quantifies that the impact physical nonidealities, such as signal-to-noise ratio, phase noise, intermodulation distortion, and amplitude and phase imbalances in quadrature signal paths, have on bit-error rates in broadband <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$D$ </tex-math></inline-formula> -band communication systems. This is followed by a comparative assessment of different arrayed-system configurations that include traditional phased arrays, the use of polarization diversity for the transmission of different or identical data streams, and multiple input multiple output (MIMO) operation. The article also presents an overview of possible transceiver architectures for implementing beam-steering arrays and an outline of the associated tradeoffs. The beam-squinting effect seen in large arrays is also investigated in detail. On the implementation front, we present a comparison between different integrated-circuit technologies for high-frequency applications. These include CMOS and SiGe bipolar complementary metal oxide semiconductor (BiCMOS) heterojunction bipolar transistors (HBTs) in silicon technologies, and MOSFETs, HBTs, and HEMTs in III–V technologies, such as InP and GaAs. Implementation challenges are then addressed, and these include the design of high-frequency circuits in the latest IC technologies, current advances in antenna and packaging technologies, and emerging solutions for hybrid integration. The article also details the design and characterization of critical <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$D$ </tex-math></inline-formula> -band transceiver circuit blocks, namely, power and low-noise amplifiers, mixers, phase shifters, passive components for quadrature-phase generation, and radiators exploring hybrid antennas, which we have developed over the course of the past five years. These results compliment the literature survey with comparisons with state-of-the-art designs and are applied to radio-link simulations to predict the performance of practicable wireless links.

Secure Modern Wireless Communication Network Based on Blockchain Technology

Sixth-generation (6G) wireless networking studies have begun with the global implementation of fifth-generation (5G) wireless systems. It is predicted that multiple heterogeneity applications and facilities may be supported by modern wireless communication networks (MWCNs) with improved effectiveness and protection. Nevertheless, a variety of trust-related problems that are commonly disregarded in network architectures prevent us from achieving this objective. In the current world, MWCN transmits a lot of sensitive information. It is essential to protect MWCN users from harmful attacks and offer them a secure transmission to meet their requirements. A malicious node causes a major attack on reliable data during transmission. Blockchain offers a potential answer for confidentiality and safety as an innovative transformative tool that has emerged in the last few years. Blockchain has been extensively investigated in several domains, including mobile networks and the Internet of Things, as a feasible option for system protection. Therefore, a blockchain-based modal, Transaction Verification Denied conflict with spurious node (TVDCSN) methodology, was presented in this study for wireless communication technologies to detect malicious nodes and prevent attacks. In the suggested mode, malicious nodes will be found and removed from the MWCN and intrusion will be prevented before the sensitive information is transferred to the precise recipient. Detection accuracy, attack prevention, security, network overhead, and computation time are the performance metrics used for evaluation. Various performance measures are used to assess the method’s efficacy, and it is compared with more traditional methods.

Minkowski–Sierpinski Fractal Structure-Inspired 2 × 2 Antenna Array for Use in Next-Generation Wireless Systems

In this paper, the design, simulation, fabrication, and characterization study of a low-cost and directional hybrid four-element (2 × 2 configuration) Minkowski–Sierpinski fractal antenna array (MSFAA) for the high-efficiency IEEE 802.11ax WLANs (Wi-Fi 6E) and the sub-6 GHz 5G wireless system is presented. Each element of the array is separated by 0.7 λ0. The complete four-element fractal antenna array system includes designing the single-element Minkowski–Sierpinski fractal antenna using two different substrates for performance comparison and an equal-split Wilkinson power divider (WPD) to achieve power division and to form a feed network. The single-element antenna, four-element fractal antenna array, and WPDs are fabricated using a flame-resistant (FR4) glass epoxy substrate with a dielectric constant (εr) of 4.3 and thickness (h) of 1.66 mm. For performance comparison, a high-end Rogers thermoset microwave material (TMM4) substrate is also used, having εr = 4.5 and h = 1.524mm, respectively. The designed four-element fractal antenna array operates at the dual-band frequencies of 4.17 and 5.97 GHz, respectively. The various performance parameters of the antenna array, such as return loss, bandwidth, gain, and 2D and 3D radiation patterns, are analyzed using CST Microwave Studio. The fabricated four-element antenna array provides the bandwidth and gain characteristic of 85 MHz/4.19 dB and 182 MHz/9.61 dB at 4.17 and 5.97 GHz frequency bands, respectively. The proposed antenna array design gives an improvement in the bandwidth, gain, and radiation pattern in the boresight at both frequencies. In the IEEE 802.11 ax WLANs (Wi-Fi 6E) deployments and the upcoming 5G wireless and satellite communication systems, it is critical to have directional antenna arrays to focus the radiated power in any specific direction. Therefore, it is believed that the proposed dual-band four-element fractal antenna array with directional radiation patterns can be an ideal candidate for the high-efficiency IEEE 802.11ax WLANs (Wi-Fi 6E) and the upcoming 5G wireless and satellite communication systems.

Machine Learning Techniques for 5g And Beyond

In today's world, wireless communication systems are extremely important for applications related to entertainment, business, commerce, health and safety. These systems continue to advance from generation to generation and at this time, fifth generation (5G) wireless networks are being deployed globally the globe. Beyond 5G wireless systems, which will represent the sixth generation (6G) of the evolution, are already being discussed in academia and industry. The application of artificial intelligence (AI) and machine learning (ML) to such wireless networks will be one of the primary and essential elements of 6G systems. According to our present understanding of wireless technologies up to 5G, every component and building block of a wireless system, such as the physical, network, and application layers, will involve one or more of them.