본 연구에서는 바이오매스 기반 나일론 6,5 공중합체를 제조하기 위하여 단량체인 <TEX>${\varepsilon}$</TEX>-caprolactam과 2-piperidone을 glucose로부터 발효공정으로 제조된 lysine과 5-aminovaleric acid로부터 각각 제조하였다. 이들을 potassium tertbutoxide를 촉매로 하고 acetyl-2-caprolactam과 이산화탄소를 개시제로 사용하여 <TEX>$40^{\circ}C$</TEX>에서 음이온 개환 중합 방법을 이용하여 나일론 6,5 공중합체를 제조하였다. 제조된 바이오 나일론 6,5 공중합체의 특성을 여러 가지 기기분석 방법으로 분석하였다. 이때 얻어진 고분자의 점도분자량(<TEX>$M_{\eta}$</TEX>)은 최대 30000 g/mol 정도였으며, 중합 수율은 50% 이상이었다. 이들은 모두 semi-crystalline 고분자로 밝혀졌다. 열 특성 분석 결과 용융온도는 약 <TEX>$165^{\circ}C$</TEX> 정도로 분해온도 <TEX>$250^{\circ}C$</TEX>와 큰 차이를 나타내었다. 이들 고분자들은 우수한 가공성과 응용성을 지닐 것으로 예상된다. To prepare biomass based nylon 6,5 copolymers, <TEX>${\varepsilon}$</TEX>-caprolactam and 2-piperidone, the monomers of nylon 6,5 copolymers, were synthesized respectively from lysine and 5-aminovaleric acid which were produced from glucose by the fermentation process. The copolymers were then polymerized by the anionic ring opening polymerization of them at <TEX>$40^{\circ}C$</TEX>, using potassium tert-butoxide as a catalyst and acetyl-2-caprolactam and carbon dioxide as initiators. The prepared copolymers were characterized with various analytical methods: their viscosity molecular weight (<TEX>$M_{\eta}$</TEX>) was as high as 30000 g/mol and polymerization yield was over 50%, and it was found that they were semi-crystalline polymers having melting point at <TEX>$165^{\circ}C$</TEX> which was much lower than its thermal degradation point, <TEX>$250^{\circ}C$</TEX>. These polymers were expected to have good thermal processability and application fields.