3D Mitral Valve Research Articles

Three-Dimensional Mitral Valve Morphology and Age-Related Trends in Children and Young Adults with Structurally Normal Hearts Using Transthoracic Echocardiography

The mitral valve has a complex three-dimensional (3D) morphology that is incompletely described by two-dimensional echocardiography (echo). Three-dimensional echo provides a more robust tool to analyze the mitral valve. The shape of the mitral annulus and leaflets, and differences with age, have not been described by 3D echo in normal children. Our objective was to characterize and quantify the 3D mitral valve morphology in children with normal transthoracic echocardiograms over a broad spectrum of age and to identify differences in valve shape with age. Three-dimensional midsystolic mitral valve models were constructed in 100 children and young adults with normal echocardiograms using 3D transthoracic images. Annular and leaflet metrics were quantified and regression equations were prepared. Interuser and intrauser variability was measured. Two hundred fifty patients, from neonate to young adult, were retrospectively reviewed to obtain 100 evaluable patients (40% evaluable). The annular height to commissural width ratio of the mitral valve ("saddle shape") was preserved across age (median 24.3, IQR 21.8-28.1). Three-dimensional mitral valve area, length, and volume parameters were linearly related to body surface area (P<.001). The ratio of anterior to posterior leaflet length and posterior leaflet angle increased with body surface area (P=.0004 and .002, respectively) suggesting posterior movement of the coaptation line. Two-dimensional lateral annular diameter underestimated 3D lateral annular metrics (P<.001, mean difference 20-22%) but was highly correlated (R>0.87, P<.001). Interuser and intrauser variability were acceptable. Assessment of 3D mitral valve morphology in children is possible in a modern clinical pediatric echocardiography laboratory using transthoracic images, although further optimization of imaging is needed. The saddle shape of the mitral annulus was preserved across age and size. Most mitral valve parameters increased linearly with patient size. Further investigation is warranted to explore changes in valve morphology in the pediatric population in health and with disease.

TCTAP A-164 Post-procedure 3D Mitral Valve Geometry Alteration in Transapical Mitral Valve-in-valve Surgery Using Two Different Valve System

Alteration of the 3-dimensional (3D) mitral valve (MV) geometry in transapical mitral valve-in-valve (VIV) procedure is not well-defined. We aimed to investigate the 3D post-procedural MV geometry change in patients who received two different types of prosthesis. We enrolled 12 patients who had

Prolapse Volume to Prolapse Height Ratio for Differentiating Barlow’s Disease From Fibroelastic Deficiency

As mitral valve (MV) repair for Barlow's disease remains surgically challenging, it is important to distinguish Barlow's disease from fibroelastic deficiency (FED) preoperatively. We hypothesized that the prolapse volume to prolapse height ratio (PV-PH ratio) may be useful to differentiate Barlow's disease and FED.Methods and Results:In 76 patients with MV prolapse who underwent presurgical transesophageal echocardiography, the 3D MV morphology was quantified: 19 patients were diagnosed with Barlow's disease and 57 with FED. The patients with Barlow's disease had greater prolapse volume and height than the patients with FED, as well as greater PV-PH ratio (0.61±0.35 vs. 0.17±0.10, P<0.001). Receiver-operating characteristic analysis revealed that with a cutoff value of 0.27, the PV-PH ratio differentiated Barlow's disease from FED with 84.2% sensitivity and 84.2% specificity. Net reclassification improvement showed that the differentiating ability of the PV-PH ratio was significantly superior to prolapse volume (1.30, P<0.001). After being adjusted by each of prolapse volume and height, annular area and shape, and the number of prolapsed segments, the PV-PH ratio had an independent association with Barlow's disease. The PV-PH ratio was able to differentiate Barlow's disease from FED with high accuracy. 3D quantification including this value should be performed before MV repair.

Patient-specific CFD simulation of intraventricular haemodynamics based on 3D ultrasound imaging.

BackgroundThe goal of this paper is to present a computational fluid dynamic (CFD) model with moving boundaries to study the intraventricular flows in a patient-specific framework. Starting from the segmentation of real-time transesophageal echocardiographic images, a CFD model including the complete left ventricle and the moving 3D mitral valve was realized. Their motion, known as a function of time from the segmented ultrasound images, was imposed as a boundary condition in an Arbitrary Lagrangian–Eulerian framework.ResultsThe model allowed for a realistic description of the displacement of the structures of interest and for an effective analysis of the intraventricular flows throughout the cardiac cycle. The model provides detailed intraventricular flow features, and highlights the importance of the 3D valve apparatus for the vortex dynamics and apical flow.ConclusionsThe proposed method could describe the haemodynamics of the left ventricle during the cardiac cycle. The methodology might therefore be of particular importance in patient treatment planning to assess the impact of mitral valve treatment on intraventricular flow dynamics.Electronic supplementary materialThe online version of this article (doi:10.1186/s12938-016-0231-9) contains supplementary material, which is available to authorized users.

Mitral valve geometry in paediatric rheumatic mitral regurgitation.

Rheumatic mitral valve disease is associated with valvulitis and valvular regurgitation; however, the effect of the rheumatic process on the mitral valve geometry and function is not well understood. To assess mitral valve annulus remodelling in rheumatic mitral valve disease, 16 subjects aged 6-15 years with rheumatic mitral valve regurgitation [MR] [6 mild or moderate (Group 1), 10 severe (Group 2)] and 7 age- and body size-matched normal controls with adequate trans-thoracic echocardiograms were recruited. None of the patients had undergone surgical intervention and none had more than mild aortic regurgitation. None of the patients had mitral stenosis. 3D mitral valve geometry was assessed using a Tomtec system. The non-planar angle was increased in all subjects during early (control 147° ± 10, Group 1 168° ± 9, Group 2 166° ± 10; p < 0.05) and late systole (control 149° ± 12, Group 1 162° ± 10, Group 2 164° ± 6; p < 0.05), indicating loss of saddle shape. 2D annular area increased in Group 2 (control 397 ± 48 mm(2)/m(2) vs Group 2 739 ± 207, p < 0.05) with no significant change in annular perimeter indicating leaflet effacement. Mitral valve area correlated with left ventricular size (p < 0.001, r (2) = 0.74). There was no significant change in valve area and perimeter between early and late systole. Remodelling of the mitral valve apparatus in childhood rheumatic heart disease results in abnormal annular geometry. The mitral valve loses its saddle shape regardless of the severity of MR. This may be a consequence of inflammation on the fibrous trigones and surrounding annulus. In contrast, annular area enlargement occurs as a result of leaflet effacement and relates to MR severity and LV size.

Quantitative Assessment of Mitral Valve Coaptation Using Three-Dimensional Transesophageal Echocardiography

Functional mitral regurgitation (FMR) occurs as a consequence of left ventricular remodeling and is an independent predictor of adverse outcome. FMR is assessed qualitatively with two-dimensional echocardiography, but accurate quantitation of the actual degree of mitral valve (MV) coaptation is not possible with this method. We evaluated a novel three-dimensional (3D) approach to quantify the MV coaptation zone in patients with FMR. We hypothesized that measuring the 3D MV coaptation zone is feasible and would correlate with FMR severity when indexed to MVarea. Data were gathered on 25 patients with FMR undergoing cardiac operations, and included a comprehensive two-dimensional and 3D examination with intraoperative transesophageal echocardiography. Using available 3D MV quantification software, offline analysis of end-systolic MV coaptation zone and MV area was performed. A novel MV coaptation index was calculated by the following formula: [3D end-systolic MV coaptation zone/3D MV area]. FMR severity was described as trace, mild, moderate, and severe using the integrative approach recommended by official guidelines. Analysis of variance demonstrated that the coaptation index was associated with the severity of FMR (F= 20.5, r(2)= 0.75, p < 0.0001). There was also a correlation between 2D vena contracta and the coaptation index (r= -0.74, p < 0.0003). We describe a novel 3D approach to direct assessment of the MV coaptation zone. When indexed to the MV area, the 3D MV coaptation zone is closely associated with FMR severity. Assessment of the mitral coaptation may be a potentially powerful tool inthe perioperative evaluation of the competency of theMV.

Mitral valve function following ischemic cardiomyopathy: a biomechanical perspective

Ischemic mitral valve (MV) is a common complication of pathologic remodeling of the left ventricle due to acute and chronic coronary artery diseases. It frequently represents the pathologic consequences of increased tethering forces and reduced coaptation of the MV leaflets. Ischemic MV function has been investigated from a biomechanical perspective using finite element-based computational MV evaluation techniques. A virtual 3D MV model was created utilizing 3D echocardiographic data in a patient with normal MV. Two types of ischemic MVs containing asymmetric medial-dominant or symmetric leaflet tenting were modeled by altering the configuration of the normal papillary muscle (PM) locations. Computational simulations of MV function were performed using dynamic finite element methods, and biomechanical information across the MV apparatus was evaluated. The ischemic MV with medial-dominant leaflet tenting demonstrated distinct large stress distributions in the posteromedial commissural region due to the medial PM displacement toward the apical-medial direction resulting in a lack of leaflet coaptation. In the ischemic MV with balanced leaflet tenting, mitral incompetency with incomplete leaflet coaptation was clearly identified all around the paracommissural regions. This computational MV evaluation strategy has the potential for improving diagnosis of ischemic mitral regurgitation and treatment of ischemic MVs.

Concomitant three-dimensional prosthetic ring annuloplasty for functional tricuspid valve disease in patients with chronic ischemic mitral regurgitation

Objective: To analyse the results of three-dimensional (3D) prosthetic ring annuloplasty for functional tricuspid valve (TV) disease in patients with chronic ischemic mitral regurgitation (MR) concomitant to mechanism-specific restrictive 3D mitral valve (MV) annuloplasty and coronary artery bypass grafting (CABG).

Quantitative Mitral Valve Modeling Using Real-Time Three-Dimensional Echocardiography: Technique and Repeatability

Real-time three-dimensional (3D) echocardiography has the ability to construct quantitative models of the mitral valve (MV). Imaging and modeling algorithms rely on operator interpretation of raw images and may be subject to observer-dependent variability. We describe a comprehensive analysis technique to generate high-resolution 3D MV models and examine interoperator and intraoperator repeatability in humans. Patients with normal MVs were imaged using intraoperative transesophageal real-time 3D echocardiography. The annulus and leaflets were manually segmented using a TomTec Echo-View workstation. The resultant annular and leaflet point cloud was used to generate fully quantitative 3D MV models using custom Matlab algorithms. Eight images were subjected to analysis by two independent observers. Two sequential images were acquired for 6 patients and analyzed by the same observer. Each pair of annular tracings was compared with respect to conventional variables and by calculating the mean absolute distance between paired renderings. To compare leaflets, MV models were aligned so as to minimize their sum of squares difference, and their mean absolute difference was measured. Mean absolute annular and leaflet distance was 2.4±0.8 and 0.6±0.2 mm for the interobserver and 1.5±0.6 and 0.5±0.2 mm for the intraobserver comparisons, respectively. There was less than 10% variation in annular variables between comparisons. These techniques generate high-resolution, quantitative 3D models of the MV and can be used consistently to image the human MV with very small interoperator and intraoperator variability. These data lay the framework for reliable and comprehensive noninvasive modeling of the normal and diseased MV.

Three-Dimensional Transesophageal Echocardiography Is a Major Advance for Intraoperative Clinical Management of Patients Undergoing Cardiac Surgery

Echocardiography is a key assessment tool for the evaluation of cardiac structure and function. The ability to image cardiac structures using 3-dimensional (3D) echocardiography is evolving. In this article, we present some of the key features of the emerging 3D technology and review its applications with an emphasis on real-time 3D transesophageal echocardiography.

Value of Augmented Reality-Enhanced Transesophageal Echocardiography (TEE) for Determining Optimal Annuloplasty Ring Size During Mitral Valve Repair

Mitral valve (MV) annuloplasty is an integral part of MV repair, but sizing under direct vision is occasionally challenging. Furthermore, traditional sizing is not possible for percutaneous MV repair techniques. This study compared augmented reality-enhanced three-dimensional (3D) transesophageal echocardiography (TEE) for determining MV annuloplasty size with conventional surgical sizing. In patients undergoing elective MV repair, a 3D MV reconstruction was performed using TEE. Modified 4D valve assessment software was used to create 3D computer-aided design models of standard annuloplasty rings (28 to 36 mm), which were stored in a digital database. These virtual 3D annuloplasty ring templates were superimposed on the preoperative 3D TEE reconstructions of the MV, and results were compared with conventional sizing under direct vision. A post hoc validation of the 3D models was performed using the implanted rings as a control. The echocardiographer was blinded to the implanted ring size. The study included 50 patients. The correlation between the selected 3D annuloplasty ring template and the implanted annuloplasty ring size was 0.83. Thirty ring templates (60%) were the same size as the implanted annuloplasty ring, 19 templates (38%) differed by +/-2 mm in size, and 1 template differed by +4 mm. Postoperatively, the validation protocol revealed a correlation of 0.94 between the size of the ring templates and the implanted annuloplasty prostheses. Augmented reality-enhanced TEE for determining optimal annuloplasty ring size during MV repair correlates well with conventional surgical sizing and may facilitate future percutaneous MV repair techniques.

Use of Real-time 3-dimensional Transthoracic Echocardiography in the Evaluation of Mitral Valve Disease

Three-dimensional (3D) echocardiography (3DE) provides unique orientations of the mitral valve (MV) not obtainable by routine 2-dimensional echocardiography. However, this modality has not been adopted in routine clinical practice because of its cumbersome and time-consuming process. The recent introduction of a full matrix-array transducer has enabled online real-time 3DE (RT3DE) and rendering. This study was designed to: (1) determine the clinical use of RT3DE in patients with MV pathology and in a control group selected for their good acoustic windows (protocol I); and (2) to investigate the feasibility of imaging the MV apparatus in a large group of consecutively imaged patients to determine the acoustic window or perspective from which the MV leaflets, commissures, and orifice are best visualized (protocol II). In protocol I, 65 patients were selected based on MV pathology and good 2-dimensional echocardiography image quality. Protocol II included 150 patients who were consecutively imaged using RT3DE. Images were viewed online (protocol I) and offline on a digital review station (protocol II). RT3DE visualization of the MV apparatus was graded based on the percentage of leaflet dropout and definition. In protocol I, 78% of patients had adequate 3D MV reconstructions with complete visualization of the anterior mitral leaflet (AML) in 84% versus the posterior mitral leaflet (PML) in 77%. The mitral leaflets, commissures, and MV orifice were well seen in 98%; however, the submitral apparatus was only observed in 76% of the patients. RT3DE: (1) correctly identified the prolapsed/flailed scallop in 6 of 8 patients; (2) obtained en face orientation of the MV orifice in 9 of 11 patients with mitral stenosis, allowing accurate measurements of the orifice area and evaluation of the immediate effects of balloon mitral valvuloplasty; and (3) allowed postoperative evaluation of MV repair and the integrity of the struts of a bioprosthetic leaflet. In protocol II, 70% of patients had adequate RT3DE with complete visualization of the AML noted in 55% versus 51% for PML. The mitral leaflets, commissures, and MV orifice were observed in 69%. Irrespective of acquisition window, the AML was best seen from a ventricular perspective. In contrast, the PML was optimally examined from a parasternal window. Both the medial and lateral commissures were equally assessed from either imaging window. In conclusion, RT3DE of the MV is feasible in a large majority of patients. Using different MV acquisitions RT3DE provides important clinical information such as: (1) identification of a prolapsed/flail scallop; (2) measurement of stenotic valve areas; (3) evaluation of MV leaflet integrity postrepair; and (4) identification of a MV perforation. In general the AML is better visualized than the PML. The parasternal window is the optimal approach to visualize both AML and PMLs.

Quantification of mitral regurgitation orifice area by 3-dimensional echocardiography: comparison with effective regurgitant orifice area by PISA method and proximal regurgitant jet diameter

Background: The evaluation of mitral regurgitation (MR) by 3-dimensional (3D) echo has generally been performed by reconstruction of Doppler regurgitant jets but there are little data on measuring anatomic regurgitant orifice area (AROA) directly from 3D mitral valve (MV) reconstructions. Methods and results: Transoesophageal echo (TOE) 3D images were acquired from 38 unselected patients (age 59±11 years, ten in atrial fibrillation) with various degrees of MR. In all patients MV was reconstructed en face from the left atrium (LA) and the left ventricle (LV). AROA was measured by planimetry from 3D pictures and compared to the effective regurgitant orifice area (EROA) by proximal isovelocity surface area and proximal MR jet width from 2D echo. AROA was measured in 95% of patients from LA, 89% from LV and in 84% from both LA and LV. Good correlation was found between EROA and AROA measured from both LA ( r=0.97, P<0.0001) and LV ( r=0.87, P<0.0001). The mean difference between LA-AROA and EROA was −3.01±6.12 mm 2 and −7.18±13.84 mm 2 for LV-AROA ( P<0.01, respectively). An acceptable correlation was found between the proximal MR jet width and AROA from LA ( r=0.71, P<0.0001) and LV perspective ( r=0.68, P<0.0001). AROA≥25 mm 2 differentiated mild MR (graded 1–2) from moderately severe (graded 3–4) with 80–90% accuracy. Conclusions: 3D TOE provides important quantitative information on both the mechanism and the severity of MR in an unselected group of patients. AROA enables quantification of MR with excellent agreement with the accepted clinical method of proximal flow convergence.

Accuracy of three-dimensional echocardiographic measurements of mitral valve orifice area using transthoracic free-hand scanning

Although three-dimensional (3D) echocardiography has been used to measure mitral valve areas (MVA) in mitral stanosis from both transescphageal (TEE) and transthoracic (TTE) approaches, the accuracy of these techniques has not been compared. Accordingly, we compared the accuracy of mitral valve area measurements obtained with a 3D volumetric free-hand (FH) TEE approach to those acquired with a 3D TEE approach using invasive Gorlin mitral valve area as the gold standard. Methods: 19 patients (49±18 yrs) with mitral stenosis were studied with TEE and free-hand TEE prior to valvuIoplasfy. During TEE, 2D images were acquired every 3 ° over 180 ° (SONOS 5500). Freehand images were obtained in 80 planes gated to respiration and heart rate using magnetic tracking, and processed on Omniview (TomTec). Direct 3D mitral valve area measurements reconstructed from TEE and free-hand TEE were compared to invasive Gorlin mitral valve area. Results: Both 3D techniques, free*hand TEE and TEE, were in good agreement with invasive data (Bland-AItmann and correlation, figure). Conclusions. Mitral valve orifice area measurements obtained with free-hand TEE scanning are as accurate as those obtained with 3D TEE, with the advantages of being noninvasive and suitable for serial measurements.