3D Gel Research Articles

Extracellular Vesicles Derived from Primary Adipose Stromal Cells Induce Elastin and Collagen Deposition by Smooth Muscle Cells within 3D Fibrin Gel Culture.

Macromolecular components of the vascular extracellular matrix (ECM), particularly elastic fibers and collagen fibers, are critical for the proper physiological function of arteries. When the unique biomechanical combination of these fibers is disrupted, or in the ultimate extreme where fibers are completely lost, arterial disease can emerge. Bioengineers in the realms of vascular tissue engineering and regenerative medicine must therefore ideally consider how to create tissue engineered vascular grafts containing the right balance of these fibers and how to develop regenerative treatments for situations such as an aneurysm where fibers have been lost. Previous work has demonstrated that the primary cells responsible for vascular ECM production during development, arterial smooth muscle cells (SMCs), can be induced to make new elastic fibers when exposed to secreted factors from adipose-derived stromal cells. To further dissect how this signal is transmitted, in this study, the factors were partitioned into extracellular vesicle (EV)-rich and EV-depleted fractions as well as unseparated controls. EVs were validated using electron microscopy, dynamic light scattering, and protein quantification before testing for biological effects on SMCs. In 2D culture, EVs promoted SMC proliferation and migration. After 30 days of 3D fibrin construct culture, EVs promoted SMC transcription of the elastic microfibril gene FBN1 as well as SMC deposition of insoluble elastin and collagen. Uniaxial biomechanical properties of strand fibrin constructs were no different after 30 days of EV treatment versus controls. In summary, it is apparent that some of the positive effects of adipose-derived stromal cells on SMC elastogenesis are mediated by EVs, indicating a potential use for these EVs in a regenerative therapy to restore the biomechanical function of vascular ECM in arterial disease.

Effects of emulsified lard and TGase on gel properties of threadfin bream (Nemipterus virgatus) surimi

The effects of emulsified lard and transglutaminase (TGase) on the characteristics of threadfin bream surimi gels were investigated. Results showed that irrespective of TGase addition, the storage and loss modulus of surimi paste decreased with the increasing emulsified lard content during gel formation. The breaking force and deformation of surimi gels decreased from 857.33 g to 16.91 mm to 234.14 g and 8.44 mm respectively, after the addition of emulsified lard (2.5 g/100 g surimi). With further increase in the concentration of emulsified lard, the breaking force decreased, and the deformation remained almost unchanged. However, the weakening effect of emulsified lard was restrained by TGase. Regardless of TGase addition, the lightness, yellowness, and juiciness of surimi gels increased with the emulsified lard concentrations. The disulfide cross-linking among myosin heavy chains (MHCs) in surimi gels was inhibited by the emulsified lard, and the covalent cross-linking among MHCs was promoted by TGase. Emulsified lard and TGase could promote the hydrogen bonds among protein molecules in surimi gels. The compact and dense 3D gel network was destroyed by the added emulsified lard but protected in the presence of TGase. Therefore, high-quality surimi products could be produced under the combined action of emulsified lard and TGase.

Quinomycin A reduces cyst progression in polycystic kidney disease.

Polycystic kidney disease (PKD) is a genetic disorder characterized by aberrant renal epithelial cell proliferation and formation and progressive growth of numerous fluid‐filled cysts within the kidneys. Previously, we showed that there is elevated Notch signaling compared to normal renal epithelial cells and that Notch signaling contributes to the proliferation of cystic cells. Quinomycin A, a bis‐intercalator peptide, has previously been shown to target the Notch signaling pathway and inhibit tumor growth in cancer. Here, we show that Quinomycin A decreased cell proliferation and cyst growth of human ADPKD cyst epithelial cells cultured within a 3D collagen gel. Treatment with Quinomycin A reduced kidney weight to body weight ratio and decreased renal cystic area and fibrosis in Pkd1RC/RC; Pkd2+/− mice, an orthologous PKD mouse model. This was accompanied by reduced expression of Notch pathway proteins, RBPjk and HeyL and cell proliferation in kidneys of PKD mice. Quinomycin A treatments also normalized cilia length of cyst epithelial cells derived from the collecting ducts. This is the first study to demonstrate that Quinomycin A effectively inhibits PKD progression and suggests that Quinomycin A has potential therapeutic value for PKD patients.

3D gel printing of VC reinforced high vanadium high-speed steel

3D gel printing of VC reinforced high vanadium high-speed steel

Biomimetic in vitro respiratory system using smooth muscle cells on ECIS chips for anti-asthma TCMs screening

Airway smooth muscle (ASM) contraction is a major pathophysiological characteristic of asthma. Although β2-adrenoceptor (β2-AR) agonists are currently used as bronchodilators, they cause rapid effect and long-term agonist-induced desensitization. Thus, it is necessary to search for more effective and safer relaxant agents for ASM cells. In this work, bitter taste receptors (TAS2Rs) were demonstrated to be expressed in primary mouse ASM cells endogenously, and they were considered as new drug targets for asthma treatment. Traditional Chinese medicines (TCMs) contained a wide range of TAS2R agonists and some of them had the efficacy of relieving cough and asthma with less toxic side effects. Then the electronic cell-substrate impedance sensor (ECIS) was used for the first time to establish a method to detect the contraction/relaxation effects of ASM cells. Therefore, we introduced a biomimetic in vitro respiratory system using ASM cells on ECIS chips to screen for potential TCMs against asthma. Quinine, nobiletin, and picfeltarraenin IA screened in this study could effectively inhibit the ASM contraction in a concentration-dependent manner, showing potential value as novel anti-asthma drugs. Furthermore, the effective screening of anti-asthma drugs was realized based on 3D ASM cell arrays and gel imaging system. Consistent results were found and the reliability of the biomimetic in vitro respiratory system for the screening of TCMs against asthma was further verified. The biomimetic system designed in this study has the advantages of operation simplicity, high throughput, non-invasive, real-time, and high sensitivity, and therefore provides a promising drug screening platform for asthma disease.

Microengineered 3D Collagen Gels with Independently Tunable Fiber Anisotropy and Directionality.

Cellular processes, including differentiation, proliferation, and migration, have been linked to the alignment (anisotropy) and orientation (directionality) of collagen fibers in the native extracellular matrix (ECM). Given the critical role that biophysical cell-matrix interactions play in regulating biological functions, several microfluidic-based methods have been used to establish 3D collagen gels with defined fiber properties; these gels have helped to establish quantitative relationships between structural ECM cues and observed cell responses. Although existing microfluidic fabrication methods provide excellent definition over collagen fiber anisotropy, they have not demonstrated the independent control over fiber anisotropy and directionality necessary to replicate in vivo collagen architecture. Therefore, to advance collagen microengineering capabilities, we present a user-friendly technology platform that uses controlled fluid flows within a non-uniform microfluidic channel network to create collagen landscapes that can be tuned as a function of extensional strain rate. Herein, we demonstrate capabilities to i) control the degree of fiber anisotropy, ii) create spatial gradients in fiber anisotropy, iii) independently define fiber directionality, and iv) generate multi-material interfaces within a 3D environment. We then address the practical issue of integrating cells into microfluidic systems by using a peel-off template technique to provide direct access to microengineered collagen gels, and demonstrate that cells respond to the defined properties of the landscape. Finally, the platform's modular capability is highlighted by integrating a sub-micrometer thick porous parylene membrane onto the microengineered collagen as a method to define cell-substrate interactions.

Engaging the front wheels to drive through fibrous terrain.

In this issue of Developmental Cell, Doyle and colleagues identify periodic anterior contraction as a characteristic feature of fibroblasts and mesenchymal cancer cells embedded in 3D collagen gels. This contractile mechanism generates a matrix prestrain required for crawling in fibrous 3D environments.

3D mesenchymal cell migration is driven by anterior cellular contraction that generates an extracellular matrix prestrain.

We describe a cellular contractile mechanism employed by fibroblasts and mesenchymal cancer cells to migrate in 3D collagen gels. During 3D spreading, fibroblasts strongly deform the matrix. They protrude, polarize, and initiate migration in the direction of highest extracellular matrix (ECM) deformation (prestrain). This prestrain is maintained through anterior cellular contractions behind the leading edge prior to protrusion, coordinating a distinct 3D migration cycle that varies between cell types. Myosin IIA is required for strain polarization, generating anterior contractions, and maintaining prestrain for efficient directional cell migration. Local matrix severing disrupts the matrix prestrain, suppressing directional protrusion. We show that epithelial cancer and endothelial cells rarely demonstrate the sustained prestrain or anterior contractions. We propose that mesenchymal cells sense ECM stiffness in 3D and generate their own matrix prestrain. This requires myosin IIA to generate polarized periodic anterior contractions for maintaining a 3D migration cycle.

82786 Quantification of the Accuracy of Stereotactic Radiosurgery using Surface Guided Imaging with 3D Printed Head Phantoms

ABSTRACT IMPACT: This work assesses clinical implementation of a surface guided imaging system to improve the accuracy radiation delivery for treatment of brain lesions using a patient CT derived head phantom. OBJECTIVES/GOALS: Advancements in radiotherapy design have made clinical demand for efficient and accurate methods to deliver stereotactic radiosurgery (SRS) for treatment of intracranial lesions. This study assesses the potential of using surface guided imaging for setup using a 3D patient specific head phantom. METHODS/STUDY POPULATION: A single isocenter, multiple metastases SRS plan was generated on a CT derived RTsafe Prime phantom made of tissue equivalent materials and a polymer gel insert. Five targets of varying diameters were treated with 8Gy of radiation using two different positioning techniques. The first gel insert was irradiated within the phantom according to internal alignment with standard orthogonal x-ray imaging while the second setup used surface guided imaging, based on external anatomy. 42 hours after irradiation, the phantom was scanned in a head coil using a 1.5T MRI. MR images were fused with the patient CT data and structure set to further evaluate calculated and measured dose distributions. RESULTS/ANTICIPATED RESULTS: Discrepancies in phantom setup according to standard orthogonal x-ray imaging compared to surface guided imaging demonstrated to be <1mm in each translational (vertical, longitudinal, and lateral) and angular (rot, roll, pitch) directions. The 3D gel inserts permitted spatial analysis to compare dose distributions of measured values to those calculated in a treatment planning system (TPS). 3D GI (Gamma Index) analysis showed good alignment in high dose regions and resulted in passing rates >94% (5%/2mm) and >87% (3%/2mm). Finally, 3 of 5 targets showed better 3D GI passing rates and less geometric offset for positioning with the surface guided imaging. DISCUSSION/SIGNIFICANCE OF FINDINGS: 3D spatial analysis of human like phantoms demonstrated that patient positioning according to external anatomy performed comparable to standard methods aligning to the internal anatomy, for a multiple met SRS treatment.

Copper-Free Azide–Alkyne Cycloaddition for Peptide Modification of Alginate Hydrogels

Alginate, a biocompatible polymer naturally derived from algae, is widely used as a synthetic analogue of the extracellular matrix in tissue engineering. Integrin-binding peptide motifs, including RGD, a derivative of fibronectin, are typically grafted to the alginate polymer through carbodiimide reactions between peptide amines and alginate uronic acids. However, lack of chemo-selectivity of carbodiimide reactions can lead to side reactions that lower peptide bioactivity. To overcome these limitations, we developed an approach for copper-free, strain-promoted azide-alkyne cycloaddition (SPAAC)-mediated conjugation of azide-modified adhesive peptides (azido-cyclo-RGD, Az-cRGD) onto alginate. Successful conjugation of azide-reactive cyclooctynes onto alginates using a heterobifunctional crosslinker was confirmed by azido-coumarin fluorescent assay, NMR, and through click reactions with azide-modified fluorescent probes. Compared to cyclo-RGD peptides directly conjugated to alginate polymers with standard carbodiimide chemistry, Az-cyclo-RGD peptides exhibited higher bioactivity, as demonstrated by cell adhesion and proliferation assays. Finally, Az-cRGD peptides enhanced the effects of recombinant bone morphogenetic proteins on inducing osteogenesis of osteoblasts and bone marrow stromal stem cells in 3D alginate gels. SPAAC-mediated click approaches for peptide-alginate bioconjugation overcome the limitations of previous alginate bioconjugation approaches and potentially expand the range of ligands that can be grafted to alginate polymers for tissue engineering applications.

BNO 1095, a Standardized Dry Extract from the Fruits of Vitex agnus-castus, Impairs Angiogenesis-related Endothelial Cell Functions In Vitro.

BNO 1095, a standardized dry extract from the fruits of Vitex agnus-castus, represents an approved herbal medicinal product for the treatment of premenstrual syndrome. Angiogenesis, the formation of new blood vessels from pre-existing capillaries, plays a major role in physiological situations, such as wound healing or tissue growth in female reproductive organs, but it is also of great importance in pathophysiological conditions such as chronic inflammatory diseases or cancer. Angiogenesis is a highly regulated multi-step process consisting of distinct key events that can be influenced pharmacologically. Few studies suggested anti-angiogenic actions of V.agnus-castus fruit extracts in in vivo and ex vivo models. Here, we provide for the first time profound in vitro data on BNO 1095-derived anti-angiogenic effects focusing on distinct angiogenesis-related endothelial cell functions that are inevitable for the process of new blood vessel formation. We found that V.agnus-castus extract significantly attenuated undirected and chemotactic migration of primary human endothelial cells. Moreover, the extract efficiently inhibited endothelial cell proliferation and reduced the formation of tube-like structures on Matrigel. Of note, the treatment of endothelial cell spheroids almost blocked endothelial sprouting in a 3D collagen gel. Our data present new and detailed insights into the anti-angiogenic actions of BNO 1095 and, therefore, suggest a novel scope of potential therapeutic applications of the extract for which these anti-angiogenic properties are required.

Mapping Cell Viability Quantitatively and Independently From Cell Density in 3D Gels Noninvasively.

In biomanufacturing there is a need for quantitative methods to map cell viability and density inside 3D bioreactors to assess health and proliferation over time. Recently, noninvasive MRI readouts of cell density have been achieved. However, the ratio of live to dead cells was not varied. Herein we present an approach for measuring the viability of cells embedded in a hydrogel independently from cell density to map cell number and health. Independent quantification of cell viability and density was achieved by calibrating the 1H magnetization transfer- (MT) and diffusion-weighted NMR signals to samples of known cell density and viability using a multivariate approach. Maps of cell viability and density were generated by weighting NMR images by these parameters post-calibration. Using this method, the limits of detection (LODs) of total cell density and viable cell density were found to be 3.88 ×108 cells · mL -1· Hz -1/2 and 2.36 ×109 viable cells · mL -1· Hz -1/2 respectively. This mapping technique provides a noninvasive means of visualizing cell viability and number density within optically opaque bioreactors. We anticipate that such nondestructive readouts will provide valuable feedback for monitoring and controlling cell populations in bioreactors.

3D Bioelectronic Model of the Human Intestine

AbstractOrgan on chip (OoC) technologies have the potential to improve the translation of promising therapies currently failing in clinical trials at great expense and time due to dissimilarities between animal and human biology. Successful OoC models integrate human cells within 3D tissues with surrounding biomolecular components, and have benefited from the use of inert 3D gels and scaffolds used as templates, prompting tissue formation. However, monitoring technologies used to assess tissue integrity and drug effects are ill adapted to 3D biology. Here, a tubular electroactive scaffold serves as a template for a 3D human intestine, and enables dynamic electrical monitoring of tissue formation over 1 month. Cell‐ and extracellular matrix component‐invoked changes in the properties of the scaffold alleviate the need for posthoc placement of invasive metallic electrodes or downstream analyses. Formation of in vivo‐like stratified and polarized intestinal tissue compete with lumen contrasts with other quasi‐3D models of the intestine using rigid porous membrane to separate cell types. These results provide unprecedented real‐time information on tissue formation with highly sensitive multimodal operation, thanks to dual electrode and transistor operation. This device and the methodology for tissue growth within it represents a paradigm shift for disease modeling and drug discovery.

Dll4/Notch1 signalling pathway is required in collective invasion of salivary adenoid cystic carcinoma.

High expression of δ-like ligand 4 (Dll4) is reportedly related to the invasion, metastasis, and clinical prognosis of various malignant tumours. Our previous study revealed that collective cell invasion was a common pattern in salivary adenoid cystic carcinoma (SACC). However, the roles of the Dll4/Notch1 signalling pathway in the collective invasion of SACC remain unclear. The present study revealed that Dll4 expression was higher at the invasive front of SACC, and that this upregulation was associated with solid tumour type, high TNM grade, and high rates of metastasis and recurrence. Furthermore, the expression levels of Notch1 and Dll4 were positively correlated at the invasive front, and a three-dimensional (3D) culture model revealed that leader cells showed high expression of Dll4, while follower cells showed high expression of Notch1. Moreover, silencing of Dll4 expression using small interfering RNA reduced the migration, invasion, and collective invasion of SACC cells, and these abilities were rescued by Notch1 overexpression. Finally, SACC collective invasion was increased via the Dll4/Notch1 signalling pathway in experiments that involved a stiff 3D gel, hypoxia and co-culture with human endothelial cells. These findings indicated that the Dll4/Notch1 signalling pathway may be involved in the collective invasion of SACC, which may help to provide possible targets for the treatment of SACC.

Extending In-Plane Impedance Measurements from 2D to 3D Cultures: Design Considerations.

Three-dimensional (3D) cell cultures have recently emerged as tools for biologically modelling the human body. As 3D models make their way into laboratories there is a need to develop characterisation techniques that are sensitive enough to monitor the cells in real time and without the need for chemical labels. Impedance spectroscopy has been shown to address both of these challenges, but there has been little research into the full impedance spectrum and how the different components of the system affect the impedance signal. Here we investigate the impedance of human fibroblast cells in 2D and 3D collagen gel cultures across a broad range of frequencies (10 Hz to 5 MHz) using a commercial well with in-plane electrodes. At low frequencies in both 2D and 3D models it was observed that protein adsorption influences the magnitude of the impedance for the cell-free samples. This effect was eliminated once cells were introduced to the systems. Cell proliferation could be monitored in 2D at intermediate frequencies (30 kHz). However, the in-plane electrodes were unable to detect any changes in the impedance at any frequency when the cells were cultured in the 3D collagen gel. The results suggest that in designing impedance measurement devices, both the nature and distribution of the cells within the 3D culture as well as the architecture of the electrodes are key variables.

Evaluation of the penetration process of fluorescent collagenase nanocapsules in a 3D collagen gel

One of the major limitations of nanomedicine is the scarce penetration of nanoparticles in tumoral tissues. These constrains have been tried to be solved by different strategies, such as the employ of polyethyleneglycol (PEG) to avoid the opsonization or reducing the extracellular matrix (ECM) density. Our research group has developed some strategies to overcome these limitations such as the employ of pH-sensitive collagenase nanocapsules for the digestion of the collagen-rich extracellular matrix present in most of tumoral tissues.However, a deeper understanding of physicochemical kinetics involved in the nanocapsules degradation process is needed to understand the nanocapsule framework degradation process produced during the penetration in the tissue. For this, in this work it has been employed a double-fluorescent labelling strategy of the polymeric enzyme nanocapsule as a crucial chemical tool which allowed the analysis of nanocapsules and free collagenase during the diffusion process throughout a tumour-like collagen matrix. This extrinsic label strategy provides far greater advantages for observing biological processes. For the detection of enzyme, collagenase has been labelled with fluorescein Isothiocyanate (FITC), whereas the nanocapsule surface was labelled with rhodamine Isothiocyanate (RITC). Thus, it has been possible to monitor the hydrolysis of nanocapsules and their diffusion throughout a thick 3D Collagen gel during the time, obtaining a detailed temporal evaluation of the pH-sensitive collagenase nanocapsule behaviour. These collagenase nanocapsules displayed a high enzymatic activity in low concentrations at acidic pH, and their efficiency to penetrate into tissue models pave the way to a wide range of possible nanomedical applications, especially in cancer therapy.

Evaluation of patient-specific MR distortion correction schemes for improved target localization accuracy in SRS.

This work aims at promoting target localization accuracy in cranial stereotactic radiosurgery (SRS) applications by focusing on the correction of sequence-dependent (also patient induced) magnetic resonance (MR) distortions at the lesion locations. A phantom-based quality assurance (QA) methodology was developed and implemented for the evaluation of three distortion correction techniques. The same approach was also adapted to cranial MR images used for SRS treatment planning purposes in single or multiple brain metastases cases. A three-dimensional (3D)-printed head phantom was filled with a 3D polymer gel dosimeter. Following treatment planning and dose delivery, volumes of radiation-induced polymerization served as hypothetical lesions, offering adequate MR contrast with respect to the surrounding unirradiated areas. T1-weighted (T1w) MR imaging was performed at 1.5T using the clinical scanning protocol for SRS. Additional images were acquired to implement three distortion correction methods; the field mapping (FM), mean image (MI) and signal integration (SI) techniques. Reference lesion locations were calculated as the averaged centroid positions of each target identified in the forward and reverse read gradient polarity MRI scans. The same techniques and workflows were implemented for the correction of contrast-enhanced T1w MR images of 10 patients with a total of 27 brain metastases. All methods employed in the phantom study diminished spatial distortion. Median and maximum distortion magnitude decreased from 0.7mm (2.10ppm) and 0.8mm (2.36ppm), respectively, to <0.2mm (0.61ppm) at all target locations, using any of the three techniques. Image quality of the corrected images was acceptable, while contrast-to-noise ratio slightly increased. Results of the patient study were in accordance with the findings of the phantom study. Residual distortion in corrected patient images was found to be <0.3mm in the vast majority of targets. Overall, the MI approach appears to be the most efficient correction method from the three investigated. In cranial SRS applications, patient-specific distortion correction at the target location(s) is feasible and effective, despite the expense of longer imaging time since additional MRI scan(s) need to be performed. A phantom-based QA methodology was developed and presented to reassure efficient implementation of correction techniques for sequence-dependent spatial distortion.

Controlled Strain of 3D Hydrogels under Live Microscopy Imaging.

External forces are an important factor in tissue formation, development, and maintenance. The effects of these forces are often studied using specialized in vitro stretching methods. Various available systems use 2D substrate-based stretchers, while the accessibility of 3D techniques to strain soft hydrogels, is more restricted. Here, we describe a method that allows external stretching of soft hydrogels from their circumference, using an elastic silicone strip as the sample carrier. The stretching system utilized in this protocol is constructed from 3D-printed parts and low-cost electronics, making it simple and easy to replicate in other labs. The experimental process begins with polymerizing thick (>100 μm) soft fibrin hydrogels (Elastic Modulus of ~100 Pa) in a cut-out at the center of a silicone strip. Silicone-gel constructs are then attached to the printed-stretching device and placed on the confocal microscope stage. Under live microscopy the stretching device is activated, and the gels are imaged at various stretch magnitudes. Image processing is then used to quantify the resulting gel deformations, demonstrating relatively homogenous strains and fiber alignment throughout the gel's 3D thickness (Z-axis). Advantages of this method include the ability to strain extremely soft hydrogels in 3D while executing in situ microscopy, and the freedom to manipulate the geometry and size of the sample according to the user's needs. Additionally, with proper adaptation, this method can be used to stretch other types of hydrogels (e.g., collagen, polyacrylamide or polyethylene glycol) and can allow for analysis of cells and tissue response to external forces under more biomimetic 3D conditions.

Distinct roles for the hypoxia-inducible transcription factors HIF-1\u03b1 and HIF-2\u03b1 in human osteoclast formation and function

Bone homeostasis is maintained by a balance between osteoblast-mediated bone formation and osteoclast-driven bone resorption. Hypoxia modulates this relationship partially via direct and indirect effects of the hypoxia-inducible factor-1 alpha (HIF-1α) transcription factor on osteoclast formation and bone resorption. Little data is available on the role(s) of the HIF-2α isoform of HIF in osteoclast biology. Here we describe induction of HIF-1α and HIF-2α during the differentiation of human CD14+ monocytes into osteoclasts. Knockdown of HIF-1α did not affect osteoclast differentiation but prevented the increase in bone resorption that occurs under hypoxic conditions. HIF-2α knockdown did not affect bone resorption but moderately inhibited osteoclast formation. Growth of osteoclasts in 3D gels reversed the effect of HIF-2α knockdown; HIF-2α siRNA increasing osteoclast formation in 3D. Glycolysis is the main HIF-regulated pathway that drives bone resorption. HIF knockdown only affected glucose uptake and bone resorption in hypoxic conditions. Inhibition of glycolysis with 2-deoxy-d-glucose (2-DG) reduced osteoclast formation and activity under both basal and hypoxic conditions, emphasising the importance of glycolytic metabolism in osteoclast biology. In summary, HIF-1α and HIF-2α play different but overlapping roles in osteoclast biology, highlighting the importance of the HIF pathway as a potential therapeutic target in osteolytic disease.

Developing practical techniques of retrospective dosimetry for affected individuals in radiological emergencies

Professor Hiroshi Yasuda, based at Hiroshima University in Japan, is seeking to advance techniques for radiation dosimetry and radiological risk assessment. Radiation dosimetry includes measurement, calculation and prediction of ionising radiation doses absorbed by the organs and tissues of a human body. The techniques will be useful after a range of incidents including: nuclear/radiological accidents; failures in medical treatment using radiation; increase of solar flare particles in aviation; and terrorist attacks using radionuclides. It can save lives by determining someone's exposure to radiation following such an incident, enabling appropriate and timely medical intervention to be administered. Yasuda heads up a team in the University's Research Institute for Radiation Biology and Medicine (RIRBM), where the researchers are actively focusing on four research topics: Biosample-ESR dosimetry; 3D gel dosimetry; novel luminescence dosimetry for accidental exposure; and individual aviation dosimetry for flyers.