4DCT Scans Research Articles

Advances in Anatomic Total Shoulder Arthroplasty Glenoid Implant Design.

Since the advent of Neer's total shoulder arthroplasty in 1974, glenoid implant design has evolved to optimize patient function and increase implant longevity. Glenoid loosening continues to be a major cause of total shoulder arthroplasty failure due to both patient and implant factors. The more recent development of posterior augmented glenoids, peg fixation with ingrowth potential, inlay implants, zoned conformity implants, and convertible glenoids have all shown promising results in improving glenoid fixation and survival in different clinical circumstances. The increased utilization of 3D CT scans, preoperative planning, and patient-specific instrumentation has paralleled innovation in glenoid implants with the aim of improving the accuracy of glenoid implant placement to further optimize patient function and implant longevity. Specific indications for the variety of glenoid implants available today are still being studied. The shoulder arthroplasty surgeon should consider patient and implant factors and patient goals when determining the appropriate implant for each individual.

Ancient Pines Could Reveal the Heat of Thousands of Past Seasons

A novel 3D CT scan approach unlocks temperature records preserved in the gnarled wood of bristlecone pines.

Magnetic resonance imaging vs. two- and three-dimensional computed tomography scans for assessment of glenoid inclination and version

IntroductionAccurate glenoid component placement is crucial for anatomic (TSA) or reverse (RSA) total shoulder arthroplasty. Preoperative glenoid assessment by using CT scans with or without planning software seems to be the established method to plan implant positions. MRI scans can also display the glenoid bone for preoperative assessment while reducing radiation exposure. Therefore, the objective of this study was to manually assess the glenoid version and inclination in 2D MRI and CT scans in cases with degenerative shoulder pathologies. The results were compared to those of an automated 3D planning software to validate the imaging modality for preoperative glenoid assessment. MethodsMRI and CT scans of 146 patients (n=41 aTSA; n=105 RSA) were included in this retrospective, single-center study. Glenoid version and inclination were measured manually according to Friedman et al and Maurer et al on CT and MRI scans by two observers. Subsequently, the results were compared to the automated measurements performed by a planning software. A repeated-measures analysis of variance (ANOVA) was performed to compare the measured angles and interobserver and intraobserver reliability was calculated using the intraclass correlation coefficients. The level of significance was set p<0.05. ResultsThe average glenoid inclination measured in CT scans was 7.94°±7.33°, in MRI scans 8.56°±7.34° and in automated planning software 7.87°±7.60°. The ANOVA analysis revealed significant differences in mean inclination between 2D MRI and 2D CT (p<0.0005) and between MRI and automated software (p=0.011). No significant difference was found between 2D CT scans and automated planning software (p=1.000). Mean glenoid version measured in 2D CT scans was -7.94°±10.86°, in 2D MRI scans it was -8.04°±10.80° and -8.32°±11.53° by the automated planning software. There was no significant difference in between measurement methods (p = 0.339). Interobserver error analysis showed no statistical differences between the two observers. All measurements had excellent intraobserver reliability. ConclusionPreoperative assessment of glenoid version and inclination is crucial in ensuring precise implant positioning and orientation in TSA and RSA. This study observed a significant level of concordance between manual and automated measuring techniques utilizing MRI and CT scans. Mean glenoid inclination exhibited a statistically significant difference of less than 1° across the assessment modalities and no difference for glenoid version was noted. It seems to be questionable if this finding is clinically relevant. MRI may serve as a viable and safe option for assessing glenoid morphology, version and inclination if CT scans are not available.

Analyzing RPM and RGSC Infrared Camera Sensitivity: A Comparative Study of Breathing Cycle Replication Verifications and Limitations.

This study addresses challenges in delivering high radiation doses and managing organ motion in Stereotactic Body Radiation Therapy (SBRT) for thoracic and abdominal cancer. It evaluates Varian's Real Time Position Management (RPM) system's infrared camera sensitivity during crucial Four-Dimensional computed tomography (4D-CT) scans for planning and treatment. The analysis includes CT simulator, LINAC (Novalis Tx and TrueBeam STx). This research enhances SBRT precision by offering insights into RPM and RGSC system performance across machines, impacting treatment planning and delivery optimization. The QUASAR™ Respiratory Motion Assembly phantom is aligned with precision using lasers. It is configured with either six-dot reflective or four-dot lens marker blocks featuring a retroreflective marker placed on the phantom's surface. Motion is induced by adjusting the amplitude, and the camera position is finely tuned to monitor the marker's movements. This investigation entails variations in seconds per breath (SPB) within the Quasar breath platform, specifically at intervals of 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, and 5.0 seconds while maintaining a 1cm amplitude camera setting. For TrueBeam-STx: Ensure SPB values are kept above 1.8 seconds for accurate replication. For Novalis-Tx: Stay within an SPB range of up to 2.0 seconds for reliable reproducibility. For CT Simulator: Optimal replication up to an SPB of 2.2 seconds; avoid SPB values below 1.8 seconds for reliable detection. Data for TrueBeam-STx, Novalis-Tx, and the CT simulator shows discrepancies in replicating the breathing cycle as Seconds Per Breath (SPB) decreases. Effective Infrared (IR) sensitivity is observed until SPB thresholds: 1.8s (TrueBeam-STx), 2.2s (Novalis-Tx), and 2.2s (CT simulator). We should consider values equal to or greater than the mentioned breathing periods. Variations in replicating breathing cycles signal challenges in planning and delivering treatments, especially with lower SPB values. These insights guide clinicians to adapt treatments based on machine-specific capabilities for accurate and reproducible outcomes.

Assessment Accuracy of 2D vs. 3D Imaging for Custom-Made Acetabular Implants in Revision Hip Arthroplasty.

Revision total hip arthroplasty (rTHA) presents significant challenges, particularly in patients with severe acetabular bone defects. Traditional treatment options often fall short, leading to the emergence of custom-made 3D-printed acetabular implants. Accurate assessment of implant positioning is crucial for ensuring optimal postoperative outcomes and for providing feedback to the surgical team. This single-center, retrospective cohort study evaluates the accuracy of standard 2D radiographs versus 3D CT scans in assessing the positioning of these implants, aiming to determine if 2D imaging could serve as a viable alternative for the postoperative evaluation. We analyzed the implant positions of seven rTHA patients with severe acetabular defects (Paprosky ≥ Type IIIA) using an alignment technique that integrates postoperative 2D radiographs with preoperative CT plans. Two independent investigators, one inexperienced and one experienced, measured the positioning accuracy with both imaging modalities. Measurements included translational shifts from the preoperatively templated implant position in the craniocaudal (CC), lateromedial (LM), and ventrodorsal (VD) directions, as well as rotational differences in anteversion (AV) and inclination (INCL). The study demonstrated that 2D radiographs, when aligned with preoperative CT data, could accurately assess implant positions with precision nearly comparable to that of 3D CT scans. Observed deviations were 1.4 mm and 2.7 mm in CC and LM directions, respectively, and 3.6° in AV and 0.7° in INCL using 2D imaging, all within clinically acceptable ranges. For 3D CT assessments, mean interobserver variability was up to 0.9 mm for translational shifts and 1.4° for rotation, while for 2D alignment, observer differences were 1.4 mm and 3.2° for translation and rotation, respectively. Comparative analysis of mean results from both investigators, across all dimensions (CC, LM, AV, and INCL) for 2D and 3D matching, showed no significant differences. In conclusion, conventional anteroposterior 2D radiographs of the pelvis can sufficiently determine the positioning of custom-made acetabular implants in rTHA. This suggests that 2D radiography is a viable alternative to 3D CT scans, potentially enhancing the implementation and quality control of advanced implant technologies.

Radiological Landmarks for Joint Line Level in Challenging Total Ankle Arthroplasty.

Background: Although Total Ankle Arthroplasty (TAA) is primarily performed for post-traumatic ankle arthritis with joint disruption, anatomical landmarks for Joint Line (JL) level are typically preserved. However, severe Post-Traumatic Bone Loss (PTBL) or TAA revision may render some landmarks unidentifiable, challenging JL restoration. Methods: Patients undergoing customized TAA for severe PTBL or revision were enrolled. Custom-made implants, based on 3D CT scans, were designed to address bone defects and provide adequate bone support. Evaluated parameters, measured on bilateral ankle weight-bearing radiographs taken preoperatively and 6-8 months postoperatively, included JL Height Ratio (JLHR) and the distances from JL to the Lateral Malleolus apex (LM-JL), the posterior colliculus of the Medial Malleolus (MM-JL), and the Gissane Calcaneal Sulcus (CS-JL). Reproducibility and variability were assessed, and comparisons were made between radiological parameters measured at TAA and those at the contralateral ankle. Results: Thirteen patients were included. Intra- and interobserver reliability demonstrated excellent values. The least variability was observed in the LM-JL distance. Statistically significant correlations were found between CS-JL and MM-JL distances in the operated limb and between the CS-JL of the operated limb and the contralateral ankle. While TAA parameters did not show statistically significant differences compared with the contralateral ankle, a trend toward proximalization of the JL was noted. Conclusions: This study demonstrated good reproducibility of the analyzed parameters for evaluating JL in TAA among patients with severe PTBL or undergoing revision surgery. However, these parameters cannot be deemed fully reliable. Given their potential weaknesses, it is crucial to identify more reproducible values, preferably ratios.

Case series on resection of symptomatic bifid ribs: A successful and safe treatment option

IntroductionBifid ribs are a type of, generally asymptomatic, congenital chest wall abnormality. However, patients sometimes complain about chronic chest pains, deformities and respiratory difficulty. There is limited literature regarding treatment of symptomatic bifid ribs. We present the results of two cases of symptomatic bifid ribs causing intercostal nerve impingement who underwent surgery. Presentation of caseTwo patients aged 22 and 33 presented to the outpatient clinic with chronic chest pains. After physical examination and 3D CT-scans they were diagnosed with intercostal nerve impingement caused by a bifid rib. Both patients underwent surgery to resect the upper arch of the bifid rib. Upon follow-up nine and seven months post-operatively patients reported complaints had been completely resolved and follow-up was ended. DiscussionAlthough bifid ribs are generally asymptomatic they can sometimes cause intercostal nerve impingement. These cases demonstrate that these symptoms might only start after experiencing minor trauma or a growth spurt. Intercostal nerve blockades might me a useful tool in diagnostic work-up to confirm the diagnosis. ConclusionResection of symptomatic bifid ribs is a safe and viable treatment option.

Common double-lumen tube selection methods overestimate adequate tube sizes in individual patients – a 3D reconstruction study

BackgroundAppropriate selection of double-lumen tube sizes for one-lung ventilation is crucial to prevent airway damage. Current selection methods rely on demographic factors or 2D radiography. Prediction of left bronchial diameter is indispensable for choosing the adequate tube size. This prospective observational study investigates if current selection methods sufficiently predict individuals’ left bronchial diameters for DLT selection compared to the 3D reconstruction.Methods100 patients necessitating thoracic surgery with one-lung ventilation and left-sided double-lumen tubes, ≥ 18 years of age, and a set of chest X-rays and 2D thorax CT scans for 3D reconstruction of the left main bronchus were included between 07/2021 and 06/2023. The cross-validated prediction error and the width of the 95%-prediction intervals of the 3D left main bronchial diameter utilizing linear prediction models were based on current selection methods.ResultsThe mean bronchial diameter in 3D reconstruction was 13.6 ± 2.1 mm. The ranges of the 95%-prediction intervals for the bronchial diameter were 6.4 mm for demographic variables, 8.3 mm for the tracheal diameter from the X-ray, and 5.9 mm for bronchial diameter from the 2D-CT scans. Current methods violated the suggested ‘≥1 mm’ safety criterion in up to 7% (men) and 42% (women). Particularly, 2D radiography overestimated women’s left bronchial diameter. Current methods even allowed the selection of double-lumen tubes with bronchial tube sections greater than the bronchial diameter in women.ConclusionsNeither demographic nor 2D-radiographic methods sufficiently account for the variability of the bronchial diameter. Wide 95%-prediction intervals for the bronchial diameter hamper accurate individual double-lumen tube selection. This increases women’s risk of bronchial damage, particularly if they have other predisposing factors. These patients may benefit from 3D reconstruction of the left main bronchus.Trial registrationNot applicable.

Postoperative 3D computed tomographic evaluation of 92 calcaneal fracture reduction using the sinus tarsi technique and fixation with 3.5mm cortical screws.

Fixation of calcaneus through the sinus tarsi approach is increasingly popular due to the lower rate of wound complications. The use of postoperative CT provided a better evaluation tool than using plain radiography. Our objective of the present study is to evaluate the quality of fracture reductions by postoperative 3D CT scans after surgical intervention using the sinus tarsi approach and fixation with 3.5 cortical screws. Between January 2018 and April 2020, 86 consecutive patients with 92 closed displaced intra-articular calcaneal fractures underwent ORIF with 3.5mm screws constructed via a minimally invasive sinus tarsi approach by a single foot and ankle surgeon. The preoperative radiographic assessment found 36 joint depression type and 56 tongue type fractures according to the Essex-Lopresti classification. Preoperative CT assessment found 82 type II and 10 type III according to the Sander classification. Analysis of pre- and postoperative CT parameters showed that the height of the posterior facet, the length of the posterior facet, Gissane, and Bohler's angle were significantly improved. In addition, the means of posterior facet step-off in postoperative CT was 1.07, and 72% of posterior facet reductions were < 2mm step-offs. With postoperative CT scan assessment, the treatment of displaced intra-articular calcaneal fracture with 3.5mm screws via sinus tarsi approach has achieved good quality of reduction. Therefore, the screws-only technique is an option for treating calcaneal fracture with less soft tissue damage and implant cost.

Improving the Feasibility of Mitigating Phase Errors in 4DCT caused by a Random Reference Breathing Pattern in the Quasar Phantom and the Role of Slice Thickness.

The study aimed to validate a method for minimizing phase errors by combining full-length lung 4DCT (f4DCT) scans with shorter tumor-restricted 4DCT (s4DCT) scans. It assessed the feasibility of integrating two scans one covering the entire phantom length and the other focused on the tumor area. The study also evaluated the impact of Maximum Intensity Projection (MIP) volume and imaging dose for different slice thicknesses (2.5mm and 1.25mm) in both full-length and short target-restricted 4DCT scans. The study utilized the Quasar Programmable Respiratory Motion Phantom, simulating tumor motion with a variable lung insert. The setup included a tumor replica and a six-dot IR reflector marker on the breathing platform. The objective was to analyze volume differences in fMIP_2.5mm compared to sMIP_1.25mm within their respective 4D_MIP CT series. This involved varying breathing periods (2.5s, 3.0s, 4.0s, and 5.0s) and longitudinal tumor sizes (6mm, 8mm, and 10mm). The study also assessed exposure time and expected CTDIvol of s4D_2.5mm and s4D_1.25mm for different breathing periods (5.0s to 2.0s) in the sinusoidal wave motion of the six-dot marker on the breathing platform. Conducting two consecutive 4DCT scans is viable for patients with challenging breathing patterns or when the initial lung tumor scan is in close proximity to the tumor location, eliminating the need for an additional full-length 4DCT. The analysis involves assessing MIP volume, imaging dose (CTDIvol), and exposure time. Longitudinal tumor shifts for 6mm are [16.6-17.2] in fMIP_2.5mm and [16.8-17.5] in sMIP_1.25mm, for 8mm [17.2-18.3] in fMIP_2.5mm and [17.8-18.4] in sMIP_1.25mm, and for 10mm [19-19.9] in fMIP_2.5mm and [19.4-20] in sMIP_1.25mm (p≥ 0.005), respectively. The Quasar Programmable Respiratory Motion Phantom accurately replicated varied breathing patterns and tumor motions. Comprehensive analysis was facilitated through detailed manual segmentation of Internal Target Volumes and Internal Gross Target Volumes.

PEDIATRIC OCULAR TRAUMA MANAGEMENT: A CASE STUDY OF EFFECTIVE INTRA-ORBITAL FOREIGN BODY IOFB EXTRACTION

Highlights: The rare nature of Orbitocranial Injury with Intraorbital Foreign Body (IOFB). Utilizing a 3D Head CT Scan to ascertain the precise location of the IOFB and its impact on anatomical structures is pivotal in shaping immediate treatment strategies, thereby reducing the potential for complications. Abstract: Introduction: Penetrating intraorbital foreign body (IOFB) injuries are a rare form of traumatic injury. Recognized as a surgical emergency, meticulous history-taking and a thorough examination are essential for determining the trauma's mechanism and cause, facilitating accurate diagnosis and effective disease management. Case Illustration: In the emergency room, a 5-year-old female patient was presented with a craniofacial injury resulting from an IOFB. An evacuation procedure, conducted through a subsidiary incision, was performed to extract the foreign body. Interestingly, the object removed from the orbital cavity was a plastic foreign body, initially suspected to be a fractured orbital bone. Discussion: The clinical presentation, management, and outcomes of orbital foreign body injuries can differ based on the material composition of the foreign body. In cases of intraorbital foreign body trauma, the primary treatment goal is foreign body removal. Conclusion: Precise and accurate initial management in the emergency department is crucial. Early diagnosis, aided by a 3D head CT scan, is instrumental in locating the IOFB and identifying the involved anatomical structures. This, in turn, enables timely treatment decisions to minimize the risk of complications.

Luschka’s tubercle and snapping scapula syndrome: an anatomical and clinical discourse

Snapping Scapula Syndrome (SSS) is an uncommon orthopaedic disorder characterised by audible crepitations and disrupted shoulder kinematics due to pathological interactions within the tissues between the scapula and ribcage. One rare cause of SSS is the presence of Luschka’s Tubercle, a bony prominence located on the costal surface of the superior angle of the scapula. Diagnosis of SSS due to Luschka’s Tubercle (LT) can be challenging, often eluding conventional imaging, potentially leading to mismanagement and worsening symptoms. This case series underscores the significance of LT detection, explores its role in SSS, and discusses treatment options. This series presents five patients with posterior shoulder pain and a palpable click indicative of SSS over a six-month period. Three of these patients did not exhibit Luschka’s Tubercle (LT) on 3D CT scans, while the remaining two patients had LT detected on the imaging. Arthroscopic resection successfully resolved symptoms in one of the two patients with LT. SSS is characterised by scapular snapping during movement, often associated with anatomical abnormalities such as Luschka’s Tubercle. A comprehensive approach to diagnosis and management, including imaging, conservative measures, and, when necessary, surgery, is crucial for alleviating symptoms and enhancing shoulder function in affected individuals.

Integrating local and distant radiation-induced lung injury: Development and validation of a predictive model for ventilation loss.

Investigations on radiation-induced lung injury (RILI) have predominantly focused on local effects, primarily those associated with radiation damage to lung parenchyma. However, recent studies from our group and others have revealed that radiation-induced damage to branching serial structures such as airways and vessels may also have a substantial impact on post-radiotherapy (RT) lung function. Furthermore, recent results from multiple functional lung avoidance RT trials, although promising, have demonstrated only modest toxicity reduction, likely because they were primarily focused on dose avoidance to lung parenchyma. These observations emphasize the critical need for predictive dose-response models that effectively incorporate both local and distant RILI effects. We develop and validate a predictive model for ventilation loss after lung RT. This model, referred to as P+A, integrates local (parenchyma [P]) and distant (central and peripheral airways [A]) radiation-induced damage, modeling partial (narrowing) and complete (collapse) obstruction of airways. In an IRB-approved prospective study, pre-RT breath-hold CTs (BHCTs) and pre- and one-year post-RT 4DCTs were acquired from lung cancer patients treated with definitive RT. Up to 13 generations of airways were automatically segmented on the BHCTs using a research virtual bronchoscopy software. Ventilation maps derived from the 4DCT scans were utilized to quantify pre- and post-RT ventilation, serving, respectively, as input data and reference standard (RS) in model validation. To predict ventilation loss solely due to parenchymal damage (referred to as P model), we used a normal tissue complication probability (NTCP) model. Our model used this NTCP-based estimate and predicted additional loss due radiation-induced partial or complete occlusion of individual airways, applying fluid dynamics principles and a refined version of our previously developed airway radiosensitivity model. Predictions of post-RT ventilation were estimated in the sublobar volumes (SLVs) connected to the terminal airways. To validate the model, we conducted a k-fold cross-validation. Model parameters were optimized as the values that provided the lowest root mean square error (RMSE) between predicted post-RT ventilation and the RS for all SLVs in the training data. The performance of the P+A and the P models was evaluated by comparing their respective post-RT ventilation values with the RS predictions. Additional evaluation using various receiver operating characteristic (ROC) metrics was also performed. We extracted a dataset of 560 SLVs from four enrolled patients. Our results demonstrated that the P+A model consistently outperformed the P model, exhibiting RMSEs that were nearly half as low across all patients (13±3 percentile for the P+A model vs. 24±3 percentile for the P model on average). Notably, the P+A model aligned closely with the RS in ventilation loss distributions per lobe, particularly in regions exposed to doses ≥13.5Gy. The ROC analysis further supported the superior performance of the P+A model compared to the P model in sensitivity (0.98vs. 0.07), accuracy (0.87vs. 0.25), and balanced predictions. These early findings indicate that airway damage is a crucial factor in RILI that should be included in dose-response modeling to enhance predictions of post-RT lung function.

Mid-term outcomes after stereotactic arrhythmia radioablation for refractory ventricular tachycardia

Abstract Introduction stereotactic arrhythmia radioablation (STAR) is used as a rescue treatment for refractory ventricular tachycardia (VT) originating from unreachable myocardial substrate following unsuccessful radiofrequency catheter ablation (RFCA). The mid-term outcomes of STAR, however, remain poorly known. Objective to report the mid-term efficacy and safety outcomes in our series of 21 patients (pts) treated by STAR over 6 years. Methods Inclusion of consecutive pts treated by STAR with a Cyberknife system between 2017 and 2023. 3D-electroanatomical maps (EAM) of the VT substrate during unsuccessful RFCA were used to delineate the planned target volumes (PTV) on a 4D CT scan. Patients were followed up at least every 6 months by echocardiography and ICD interrogation at the outpatient clinic. Results 21 pts [16 (76 %) male, age 66±8 years] with a mean LVEF of 40±15% were included. The underlying substrate was ischemic in 7 (33 %); non-ischemic dilated in 7 (33 %); inflammatory in 4 (19%); hypertrophic in 1 (5%); neoplasic in 1 (5%); and malignant mitral valve prolapse in 1 (5%). A dose of 21±2 Gray was delivered to the PTV (26 ml, IQR 18-43 ml). After a median follow-up of 39 [IQR, 14-48] months, 12 pts (57%) remained in stable condition, 1 (5%) underwent a heart transplantation, 1 (5%) a left ventricular assistance device, 1 (5%) was in an incessant slow VT and 6 (29%) pts died (3 from end stage heart failure). 15 (71%) pts presented VT recurrences [7 (33%) ATPs; 3 (14%) shocks; 4 (19%) VT storm and 1 (5%) with a well-tolerated slow VT (100 bpm) with an LVAD till transplantation, of whom 9 (43%) required redo RFCA. The median value of total ventricular arrhythmic burden (defined as any arrhythmia requiring ICD therapies) decreased significantly from 31 (IQR, 4-100) to 7 (IQR, 1-23) (p&amp;lt;0.05); for nsVT from 57 (IQR, 1.5- 1196) to 41 (IQR, 0.5-584) (p ns); or ICD shocks from 1.5 (IQR, 0-5.5) to 0 (IQR, 0-2) (p&amp;lt;0.05); for ATPs from 21 (IQR, 2.5-94) to 4 (IQR, 0.5-13) (p&amp;lt;0.05). Figure 1 shows a graphic representation of arrhythmic burden before and after STAR. Conclusion in this cohort of highly selected pts with refractory VT, STAR significantly reduced the arrhythmic burden by a factor of 4 over a 3-year follow-up. Death rate remained high (29%), mostly by terminal heart failure. Nevertheless, a high proportion of pts had VT recurrences that were successfully managed by redo RFCA.VT burden before and after STAR

Stereotactic arrhythmia radioablation for refractory ventricular tachycardia. A retrospective analysis and optimisation of the planning phase

Abstract Introduction Stereotactic arrhythmia radioablation (STAR) is used as a rescue treatment for refractory ventricular tachycardia (VT). However, the planning phase to accurately delineate the clinical target volume (CTV) still suffers from limitations due to the incompatibility of data formats between 3D electro-anatomical mapping systems (EAM) used for VT ablation and STAR planning software. The concordance between the CTVs as defined by the planning software (CTVSTAR) and the CTV based on EAM data (CTVEAM) remains unknown. Purpose Within the STOPSTORM European consortium, we compared the concordance between CTVSTAR and CTVEAM in our series of 13 patients (pts) treated by STAR for refractory VT. We also evaluated need for redo ablation of VT after STAR. Method Using the software Slicer3D, two protocols were retrospectively compared: Protocol 1 comprised the manual contouring of the CTVSTAR based on 4D-CT SCAN drawn side-by-side using EAM (Carto3, Biosense Webster) screenshots and diagnostic reports. Protocol 2 comprised semiautomatic segmentation of CTVEAM based on 4D-CT SCAN using imported EAMs annotated with landmarks for VT substrate delimitation. The delineation of CTVEAM included 3 steps: (1) semiautomatic segmentation of ventricular myocardium (VM), the blood-pool of the concerned ventricle and at least 2 additional cardiac cavities; (2) 3D-alignment of EAM with the segmented cavities; and (3), 3D-delineation of CTVSTAR identified as the transmural section of VM segment surrounding the EAM’s VT substrate delimited by STAR tags (Figure 1). Volume overlap (Dice coefficient, 100% meaning complete overlap) and volume absolute difference (VAD, 0% meaning similar volumes) between CTVs were compared. The following cumulative averages were computed over time: redo ablation (RedoA) and CTV. Results Figure 1 illustrates the last treated patient (#13) in whom the delineated volumes, CTVSTAR (red) and CTVEAM (blue), displayed good matching (Dice 72% and VAD 4. Figure 2 shows the comparison between CTVSTAR and CTVEAM for the 13 pts (65±7 yo) treated with STAR, resulting in a mean Dice of 47±17% and mean VAD of 40±51%. Figure 3 shows the cumulative RedoA and the cumulative averaged CTVSTAR and CTVEAM over time. Interestingly, the need for redo ablation decreased with increasing CTVs. Conclusion Our study demonstrates the efficacy of STAR treatment for refractory VT. Our confidence in STAR led to higher CTVs and lower RedoA over time. The high variability of CTV delineation using two different protocols suggests that STAR planning phase can be optimised by appointing intraprocedural anatomical landmarks to the VT substrate.

Enabling 3D CT-scanning of cultural heritage objects using only in-house 2D X-ray equipment in museums

Visualizing the internal structure of museum objects is a crucial step in acquiring knowledge about the origin, state, and composition of cultural heritage artifacts. Among the most powerful techniques for exposing the interior of museum objects is computed tomography (CT), a technique that computationally forms a 3D image using hundreds of radiographs acquired in a full circular range. However, the lack of affordable and versatile CT equipment in museums, combined with the challenge of transporting precious collection objects, currently keeps this technique out of reach for most cultural heritage applications. We propose an approach for creating accurate CT reconstructions using only standard 2D radiography equipment already available in most larger museums. Specifically, we demonstrate that a combination of basic X-ray imaging equipment, a tailored marker-based image acquisition protocol, and sophisticated data-processing algorithms, can achieve 3D imaging of collection objects without the need for a costly CT imaging system. We implemented this approach in the British Museum (London), the J. Paul Getty Museum (Los Angeles), and the Rijksmuseum (Amsterdam). Our work paves the way for broad facilitation and adoption of CT technology across museums worldwide.

Deep Learning-Based Detect-Then-Track Pipeline for Treatment Outcome Assessments in Immunotherapy-Treated Liver Cancer.

Accurate treatment outcome assessment is crucial in clinical trials. However, due to the image-reading subjectivity, there exist discrepancies among different radiologists. The situation is common in liver cancer due to the complexity of abdominal scans and the heterogeneity of radiological imaging manifestations in liver subtypes. Therefore, we developed a deep learning-based detect-then-track pipeline that can automatically identify liver lesions from 3D CT scans then longitudinally track target lesions, thereby providing the evaluation of RECIST treatment outcomes in liver cancer. We constructed and validated the pipeline on 173 multi-national patients (344 venous-phase CT scans) consisting of a public dataset and two in-house cohorts of 28 centers. The proposed pipeline achieved a mean average precision of 0.806 and 0.726 of lesion detection on the validation and test sets. The model's diameter measurement reliability and consistency are significantly higher than that of clinicians (p = 1.6 × 10-4). The pipeline can make precise lesion tracking with accuracies of 85.7% and 90.8% then finally yield the RECIST accuracies of 82.1% and 81.4% on the validation and test sets. Our proposed pipeline can provide precise and convenient RECIST outcome assessments and has the potential to aid clinicians with more efficient therapeutic decisions.

Variations in the Anatomic Morphology of the Scapular Spine and Implications on Fracture After Reverse Shoulder Arthroplasty.

This study evaluates the role of anatomic scapular morphology in acromion and scapular spine fracture (SSAF) risk after reverse shoulder arthroplasty (RSA). Twelve scapular measurements were captured based on pilot study data, including scapular width measurements at the acromion (Z1), middle of the scapular spine (Z2), and medial to the first major angulation (Z3). Measurements were applied to 3D-CT scans from patients who sustained SSAF after RSA (SSAF group) and compared with those who did not (control group). Measurements were done by four investigators, and the intraclass correlation coefficient was calculated. Regression analysis determined trends in fracture incidence. One hundred forty-nine patients from two separate surgeons (J.L., A.M.) were matched by age and surgical indication of whom 51 sustained SSAF after reverse shoulder arthroplasty. Average ages for the SSAF and control cohorts were 78.6 and 72.1 years, respectively. Among the SSAF group, 15 were Levy type I, 26 Levy type II, and 10 Levy type 3 fractures. The intraclass correlation coefficient of Z1, Z2, and Z3 measurements was excellent (0.92, 0.92, and 0.94, respectively). Zone 1 and 3 measurements for the control group were 18.6 ± 3.7 mm and 3.2 ± 1.0 mm, respectively, compared with 22.5 ± 5.9 mm and 2.0 ± 0.70 mm in the SSAF group, respectively. The fracture group trended toward larger Z1 and smaller Z3 measurements. The average scapular spine proportion (SSP), Z1/Z3, was significantly greater in the control 6.20 ± 1.80 versus (12.60 ± 6.30; P < 0.05). Regression analysis showed a scapular spine proportion of ≤5 was associated with a fracture risk <5%, whereas an SSP of 9.2 correlated with a 50% fracture risk. Patients with a thicker acromions (Z1) and thinner medial scapular spines (Z3) have increased fracture risk. Understanding anatomic scapular morphology may allow for better identification of high-risk patients preoperatively.

Assessment of Changes of Bladder Volume and Rectal Volume Using 4DCT Scan During External Beam Radiotherapy for Cervical Cancer- Observation Study

Assessment of Changes of Bladder Volume and Rectal Volume Using 4DCT Scan During External Beam Radiotherapy for Cervical Cancer- Observation Study

Retraction: 3D CT Scan—A Valuable Adjunct to Radiography

Retraction: 3D CT Scan—A Valuable Adjunct to Radiography