2-fold Axis Research Articles

Antiangiogenic Vascular Endothelial Growth Factor-Blocking Peptides Displayed on the Capsid of an Infectious Oncolytic Parvovirus: Assembly and Immune Interactions.

As many tumor cells synthetize vascular endothelial growth factors (VEGF) that promote neo-vascularization and metastasis, frontline cancer therapies often administer anti-VEGF (α-VEGF) antibodies. To target the oncolytic parvovirus minute virus of mice (MVM) to the tumor vasculature, we studied the functional tolerance, evasion of neutralization, and induction of α-VEGF antibodies of chimeric viruses in which the footprint of a neutralizing monoclonal antibody within the 3-fold capsid spike was replaced by VEGF-blocking peptides: P6L (PQPRPL) and A7R (ATWLPPR). Both peptides allowed viral genome replication and nuclear translocation of chimeric capsid subunits. MVM-P6L efficiently propagated in culture, exposing the heterologous peptide on the capsid surface, and evaded neutralization by the anti-spike monoclonal antibody. In contrast, MVM-A7R yielded low infectious titers and was poorly recognized by an α-A7R monoclonal antibody. MVM-A7R showed a deficient assembly pattern, suggesting that A7R impaired a transitional configuration that the subunits must undergo in the 3-fold axis to close up the capsid shell. The MVM-A7R chimeric virus consistently evolved in culture into a mutant carrying the P6Q amino acid substitution within the A7R sequence, which restored normal capsid assembly and infectivity. Consistent with this finding, anti-native VEGF antibodies were induced in mice by a single injection of MVM-A7R empty capsids, but not by MVM-A7R virions. This fundamental study provides insights to endow an infectious parvovirus with immune antineovascularization and evasion capacities by replacing an antibody footprint in the capsid 3-fold axis with VEGF-blocking peptides, and it also illustrates the evolutionary capacity of single-stranded DNA (ssDNA) viruses to overcome engineered capsid structural restrictions.IMPORTANCE Targeting the VEGF signaling required for neovascularization by vaccination with chimeric capsids of oncolytic viruses may boost therapy for solid tumors. VEGF-blocking peptides (VEbp) engineered in the capsid 3-fold axis endowed the infectious parvovirus MVM with the ability to induce α-VEGF antibodies without adjuvant and to evade neutralization by MVM-specific antibodies. However, these properties may be compromised by structural restraints that the capsid imposes on the peptide configuration and by misassembly caused by the heterologous peptides. Significantly, chimeric MVM-VEbp resolved the structural restrictions by selecting mutations within the engineered peptides that restored efficient capsid assembly. These data show the promise of antineovascularization vaccines using chimeric VEbp-icosahedral capsids of oncolytic viruses but also raise safety concerns regarding the genetic stability of manipulated infectious parvoviruses in cancer and gene therapies.

Structural characterization of the PCV2d virus-like particle at 3.3 Å resolution reveals differences to PCV2a and PCV2b capsids, a tetranucleotide, and an N-terminus near the icosahedral 3-fold axes

Porcine circovirus 2 (PCV2) has a major impact on the swine industry. Eight PCV2 genotypes (a-h) have been identified using capsid sequence analysis. PCV2d has been designated as the emerging genotype. The cryo-electron microscopy molecular envelope of PCV2d virus-like particles identifies differences between PCV2a, b and d genotypes that accompany the emergence of PCV2b from PCV2a, and PCV2d from PCV2b. These differences indicate that sequence analysis of genotypes is insufficient, and that it is important to determine the PCV2 capsid structure as the virus evolves. Structure-based sequence comparison demonstrate that each genotype possesses a unique combination of amino acids located on the surface of the capsid that undergo substitution. We also demonstrate that the capsid N-terminus moves in response to increasing amount of nucleic acid packaged into the capsid. Furthermore, we model a tetranucleotide between the 5- and 2-fold axes of symmetry that appears to be responsible for capsid stability.

Mutant L-chain ferritins that cause neuroferritinopathy alter ferritin functionality and iron permeability.

In mammals, the iron storage and detoxification protein ferritin is composed of two functionally and genetically distinct subunit types, H (heavy) and L (light). The two subunits co-assemble in various ratios, with a tissue specific distribution, to form shell-like protein structures of 24 subunits within which a mineralized iron core is stored. The H-subunits possess ferroxidase centers that catalyze the rapid oxidation of ferrous ions, whereas the L-subunit does not have such centers and is believed to play an important role in electron transfer reactions that occur during the uptake and release of iron. Pathogenic mutations on the L-chain lead to neuroferritinopathy, a neurodegenerative disease characterized by abnormal accumulation of ferritin inclusion bodies and iron in the central nervous system. Here, we have characterized the thermal stability, iron loading capacity, iron uptake, and iron release properties of ferritin heteropolymers carrying the three pathogenic L-ferritin mutants (L154fs, L167fs, and L148fs, which for simplicity we named Ln1, Ln2 and Ln3, respectively), and a non-pathogenic variant (L135P) bearing a single substitution on the 3-fold axes of L-subunits. The UV-Vis data show a similar iron loading capacity (ranging between 1800 to 2400 Fe(iii)/shell) for all ferritin samples examined in this study, with Ln2 holding the least amount of iron (i.e. 1800 Fe(iii)/shell). The three pathogenic L-ferritin mutants revealed higher rates of iron oxidation and iron release, suggesting that a few mutated L-chains on the heteropolymer have a significant effect on iron permeability through the ferritin shell. DSC thermograms showed a strong destabilization effect, the severity of which depends on the location of the frameshift mutations (i.e. wt heteropolymer ferritin ≅ homopolymer H-chain > L135P > Ln2 > Ln1 > Ln3). Variant L135P had only minor effects on the protein functionality and stability, suggesting that local melting of the 3-fold axes in this variant may not be responsible for neuroferritinopathy-like disorders. The data support the hypothesis that hereditary neuroferritinopathies are due to alterations of ferritin functionality and lower physical stability which correlate with the frameshifts introduced at the C-terminal sequence and explain the dominant transmission of the disorder.

A surface-stacking structural model for icosahedral quasicrystals

An original structural model for the description of icosahedral quasicrystals is proposed. This novel theoretical approach is based on a surface-stacking image of icosahedral quasicrystals and is in concert with the step-terrace morphology observed in many experimental investigations of real icosahedral surfaces. According to this model, the infinite icosahedral structure is constructed by stacking two arrangements of quasi-periodic surfaces along each of the 5-fold axis of the icosahedral symmetry. In this stacking order, the spacings between the layered surfaces are governed by Fibonacci sequence. The proposed model operates within the real physical (Euclidean) space and provides a direct three-dimensional visual representation of the icosahedral superstructure, which can be instrumental for conducting different modes of experimentations, analyses, and fabrication strategies; eliminating a major roadblock for researchers especially outside the fields of crystallography and material science. More importantly, understanding the long-range surface-stacking logic of the icosahedral structure will hopefully provide a deeper understanding of the structure of quasicrystals at an atomic scale and help achieve improved control over material compositions and structure.

In Vitro and In Vivo Inhibition of the Infectivity of Human Enterovirus 71 by a Sulfonated Food Azo Dye, Brilliant Black BN.

Hand, foot, and mouth disease (HFMD), a highly contagious disease in children, is caused by human enteroviruses, including enterovirus 71 (EV71), coxsackievirus A16 (CVA16), and coxsackievirus A6 (CVA6). Although HFMD is usually mild and self-limiting, EV71 infection occasionally leads to fatal neurological disorders. Currently, no commercial antiviral drugs for HFMD treatment are available. Here, numerous sulfonated azo dyes, widely used as food additives, were identified as having potent antiviral activities against human enteroviruses. Among them, brilliant black BN (E151) was able to inhibit all EV71, CVA16, and CVA6 strains tested. In rhabdomyosarcoma cells, the 50% inhibitory concentrations of the dye E151 for various strains of EV71 ranged from 2.39 μM to 28.12 μM, whereas its 50% cytotoxic concentration was 1,870 μM. Food azo dyes, including E151, interacted with the vertex of the 5-fold axis of EV71 and prevented viral entry. Their efficacy in viral inhibition was regulated by amino acids at VP1-98, VP1-145, and/or VP1-246. Dye E151 not only prevented EV71 attachment but also eluted attached viruses in a concentration-dependent manner. Moreover, E151 inhibited the interaction between EV71 and its cellular uncoating factor cyclophilin A. In vivo studies demonstrated that E151 at a dose of 200 mg/kg of body weight/day given on the initial 4 days of challenge protected AG129 mice challenged with 10× the 50% lethal dose of wild-type EV71 isolates. Taken together, these data highlight E151 as a promising antiviral agent against EV71 infection.IMPORTANCE Human enterovirus 71 (EV71) is one of the causative agents of hand, foot, and mouth disease in children and is responsible for thousands of deaths in the past 20 years. Food azo dyes have been widely used since the nineteenth century; however, their biological effects on humans and microbes residing in humans are poorly understood. Here, we discovered that one of these dyes, brilliant black BN (E151), was particularly effective in inhibiting the infectivity of EV71 in both cell culture and mouse model studies. Mechanistic studies demonstrated that these sulfonated dyes mainly competed with EV71 attachment factors for viral binding to block viral attachment/entry to host cells. As no commercial antiviral drugs against EV71 are currently available, our findings open an avenue to exploit the development of permitted food dye E151 as a potential anti-EV71 agent.

In situ structures of RNA-dependent RNA polymerase inside bluetongue virus before and after uncoating

Bluetongue virus (BTV), a major threat to livestock, is a multilayered, nonturreted member of the Reoviridae, a family of segmented dsRNA viruses characterized by endogenous RNA transcription through an RNA-dependent RNA polymerase (RdRp). To date, the structure of BTV RdRp has been unknown, limiting our mechanistic understanding of BTV transcription and hindering rational drug design effort targeting this essential enzyme. Here, we report the in situ structures of BTV RdRp VP1 in both the triple-layered virion and double-layered core, as determined by cryo-electron microscopy (cryoEM) and subparticle reconstruction. BTV RdRp has 2 unique motifs not found in other viral RdRps: a fingernail, attached to the conserved fingers subdomain, and a bundle of 3 helices: 1 from the palm subdomain and 2 from the N-terminal domain. BTV RdRp VP1 is anchored to the inner surface of the capsid shell via 5 asymmetrically arranged N termini of the inner capsid shell protein VP3A around the 5-fold axis. The structural changes of RdRp VP1 and associated capsid shell proteins between BTV virions and cores suggest that the detachment of the outer capsid proteins VP2 and VP5 during viral entry induces both global movements of the inner capsid shell and local conformational changes of the N-terminal latch helix (residues 34 to 51) of 1 inner capsid shell protein VP3A, priming RdRp VP1 within the capsid for transcription. Understanding this mechanism in BTV also provides general insights into RdRp activation and regulation during viral entry of other multilayered, nonturreted dsRNA viruses.

Molecular Complex of Cadmium(II) Trifluoroacetate with Triphenylphosphine: Crystal Structure and Luminescence Properties

Cadmium compound [Cd(CF3COO)2(Ph3P)2] is synthesized, and its crystal structure is determined. The crystals are monoclinic: space group C2/c, a = 20.318(4), b = 10.432(2), c = 18.661(4) A, β = 104.18(1)°, V = 3834.8(13) A3, Z = 4, ρcalcd = 1.495 g/cm3. The Cd atom arranged on the 2-fold crystallographic axis has a distorted octahedral coordination due to four oxygen atoms of crystallographically equivalent trifluoroacetate ligands and two phosphorus atoms of triphenylphosphine. Each fluorine atom of the trifluoroacetate groups is randomly disordered over three equally probable positions. The compound is luminescent.

In situ Structure of Rotavirus VP1 RNA-Dependent RNA Polymerase

Rotaviruses, like other non-enveloped, double-strand RNA viruses, package an RNA-dependent RNA polymerase (RdRp) with each duplex of their segmented genomes. Rotavirus cell entry results in loss of an outer protein layer and delivery into the cytosol of an intact, inner capsid particle (the “double-layer particle,” or DLP). The RdRp, designated VP1, is active inside the DLP; each VP1 achieves many rounds of mRNA transcription from its associated genome segment. Previous work has shown that one VP1 molecule lies close to each 5-fold axis of the icosahedrally symmetric DLP, just beneath the inner surface of its protein shell, embedded in tightly packed RNA. We have determined a high-resolution structure for the rotavirus VP1 RdRp in situ, by local reconstruction of density around individual 5-fold positions. We have analyzed intact virions (“triple-layer particles”), non-transcribing DLPs and transcribing DLPs. Outer layer dissociation enables the DLP to synthesize RNA, in vitro as well as in vivo, but appears not to induce any detectable structural change in the RdRp. Addition of NTPs, Mg2+, and S-adenosylmethionine, which allows active transcription, results in conformational rearrangements, in both VP1 and the DLP capsid shell protein, that allow a transcript to exit the polymerase and the particle. The position of VP1 (among the five symmetrically related alternatives) at one vertex does not correlate with its position at other vertices. This stochastic distribution of site occupancies limits long-range order in the 11-segment, double-strand RNA genome.

Adsorption behavior of triphenylene on Ru(0001) investigated by scanning tunneling microscopy**Project supported by the National Key Research and Development Program of China (Grant No. 2017YFB0503100) and the National Natural Science Foundation of China (Grant No. 11790313).

As a representative of small aromatic molecules, triphenylene (TP) has markedly high carrier mobility and is an ideal precursor for building graphene nanostructures. We mainly investigated the adsorption behavior of TP molecules on Ru(0001) by using scanning tunneling microscopy (STM). In submonolayer regime, TP molecules are randomly dispersed on Ru(0001) and the TP overlayer can be thoroughly dehydrogenated and converted into graphene islands at 700 K. Due to weak interaction between TP molecules and graphene, the grooves formed among graphene islands have confinement effect on TP molecules. TP adopts a flat-lying adsorption mode and has two adsorption configurations with the 3-fold molecular axis aligned almost parallel or antiparallel to the 00] direction of the substrate. At TP coverages of 0.6 monolayer (ML) and 0.8 ML, the orientational distributions of the two adsorption configurations are equal. At about 1.0 ML, we find the coexistence of locally ordered and disordered phases. The ordered phase includes two sets of different superstructures with the symmetries of and p(4×4), respectively. The adsorption behavior of TP on Ru(0001) can be attributed to the delicate balance between molecule–substrate and molecule–molecule interactions.

Iron-Sequestering Nanocompartments as Multiplexed Electron Microscopy Gene Reporters.

Multicolored gene reporters for light microscopy are indispensable for biomedical research, but equivalent genetic tools for electron microscopy (EM) are still rare despite the increasing importance of nanometer resolution for reverse engineering of molecular machinery and reliable mapping of cellular circuits. We here introduce the fully genetic encapsulin/cargo system of Quasibacillus thermotolerans (Qt), which in combination with the recently characterized encapsulin system from Myxococcus xanthus (Mx) enables multiplexed gene reporter imaging via conventional transmission electron microscopy (TEM) in mammalian cells. Cryo-electron reconstructions revealed that the Qt encapsulin shell self-assembles to nanospheres with T = 4 icosahedral symmetry and a diameter of ∼43 nm harboring two putative pore regions at the 5-fold and 3-fold axes. We also found that upon heterologous expression in mammalian cells, the native cargo is autotargeted to the inner surface of the shell and exhibits ferroxidase activity leading to efficient intraluminal iron biomineralization, which enhances cellular TEM contrast. We furthermore demonstrate that the two differently sized encapsulins of Qt and Mx do not intermix and can be robustly differentiated by conventional TEM via a deep learning classifier to enable automated multiplexed EM gene reporter imaging.

Protective humoral immunity in guinea pigs induced by PCV2 virus-like particles displaying the B cell linear epitope (228QQITDA233) of PPV1

Although PCV2 infections generally cause mild disease in pigs, concurrent co-infections with other pathogens can damage the immune system and cause more severe diseases, collectively termed porcine circovirus associated diseases (PCVAD). Involvement of porcine parvovirus (PPV, a common cause of reproductive failure in naïve dams) in PCVAD caused by PCV2, has been reported. As this co-infection can be difficult to eliminate, there is a critical need to develop an effective vaccine to protect against PPV or synergistic effects of PCV2 and PPV under field conditions. In this study, we designed chimeric PCV2 virus-like particles (cVLPs) displaying a B-cell epitope derived from PPV1 structural protein around the surface of the 2-fold axes of PCV2 VLPs, based on 3D-structure analysis of the PCV2 capsid. The cVLPs were successfully prepared, verified by transmission electron microscopy and chromatography, with robust antibody titers against PCV2 and PPV1 produced in mice and guinea pigs. In addition, in guinea pigs challenged with 106 TCID50 PCV2, cVLPs conferred more effective immune protection (based on viral load) than a commercial PCV2 vaccine. Finally, antibody responses and immune protection against PPV were also evaluated. In guinea pigs vaccinated with cVLPs, although PPV antibodies detected by a hemagglutination inhibition (HI) assay appeared later after vaccination in the PCV2 cVLPs group than in the commercial PPV vaccine group, there were fewer PPV genomic DNA copies in the PCV2 cVLPs group than in a PBS group. In conclusion, guinea pigs vaccinated with cVLPs developed effective protective immunity against PCV2 challenge, with some protective immunity against PPV. This study provided valuable research data to pursue molecular design of chimeric epitopes PCV2 VLPs.

Thermostability of the Foot-and-Mouth Disease Virus Capsid Is Modulated by Lethal and Viability-Restoring Compensatory Amino Acid Substitutions.

Infection by viruses depends on a balance between capsid stability and dynamics. This study investigated biologically and biotechnologically relevant aspects of the relationship in foot-and-mouth disease virus (FMDV) between capsid structure and thermostability and between thermostability and infectivity. In the FMDV capsid, a substantial number of amino acid side chains at the interfaces between pentameric subunits are charged at neutral pH. Here a mutational analysis revealed that the essential role for virus infection of most of the 8 tested charged groups is not related to substantial changes in capsid protein expression or processing or in capsid assembly or stability against a thermally induced dissociation into pentamers. However, the positively charged side chains of R2018 and H3141, located at the interpentamer interfaces close to the capsid 2-fold symmetry axes, were found to be critical both for virus infectivity and for keeping the capsid in a state of weak thermostability. A charge-restoring substitution (N2019H) that was repeatedly fixed during amplification of viral genomes carrying deleterious mutations reverted both the lethal and capsid-stabilizing effects of the substitution H3141A, leading to a double mutant virus with close to normal infectivity and thermolability. H3141A and other thermostabilizing substitutions had no detectable effect on capsid resistance to acid-induced dissociation into pentamers. The results suggest that FMDV infectivity requires limited local stability around the 2-fold axes at the interpentamer interfaces of the capsid. The implications for the mechanism of genome uncoating in FMDV and the development of thermostabilized vaccines against foot-and-mouth disease are discussed.IMPORTANCE This study provides novel insights into the little-known structural determinants of the balance between thermal stability and instability in the capsid of foot-and-mouth disease virus and into the relationship between capsid stability and virus infectivity. The results provide new guidelines for the development of thermostabilized empty capsid-based recombinant vaccines against foot-and-mouth disease, one of the economically most important animal diseases worldwide.

Apolipoprotein A1 Forms 5/5 and 5/4 Antiparallel Dimers in Human High-density Lipoprotein

Apolipoprotein A1 (APOA1), the major protein of high-density lipoprotein (HDL), contains 10 helical repeats that play key roles in protein-protein and protein-lipid interactions. The current structural model for HDL proposes that APOA1 forms an antiparallel dimer in which helix 5 in monomer 1 associates with helix 5 in monomer 2 along a left-left (LL5/5) interface, forming a protein complex with a 2-fold axis of symmetry centered on helix 5. However, computational studies suggest that other orientations are possible. To test this idea, we used a zero-length chemical cross-linking reagent that forms covalent bonds between closely apposed basic and acidic residues. Using proteolytic digestion and tandem mass spectrometry, we identified amino acids in the central region of the antiparallel APOA1 dimer of HDL that were in close contact. As predicted by the current model, we found six intermolecular cross-links that were consistent with the antiparallel LL5/5 registry. However, we also identified three intermolecular cross-links that were consistent with the antiparallel LL5/4 registry. The LL5/5 is the major structural conformation of the two complexes in both reconstituted discoidal HDL particles and in spherical HDL from human plasma. Molecular dynamic simulations suggest that that LL5/5 and LL5/4 APOA1 dimers possess similar free energies of dimerization, with LL5/5 having the lowest free energy. Our observations indicate that phospholipidated APOA1 in HDL forms different antiparallel dimers that could play distinct roles in enzyme regulation, assembly of specific protein complexes, and the functional properties of HDL in humans.

The Roles of Electrostatic Interactions in Capsid Assembly Mechanisms of Giant Viruses.

In the last three decades, many giant DNA viruses have been discovered. Giant viruses present a unique and essential research frontier for studies of self-assembly and regulation of supramolecular assemblies. The question on how these giant DNA viruses assemble thousands of proteins so accurately to form their protein shells, the capsids, remains largely unanswered. Revealing the mechanisms of giant virus assembly will help to discover the mysteries of many self-assembly biology problems. Paramecium bursaria Chlorella virus-1 (PBCV-1) is one of the most intensively studied giant viruses. Here, we implemented a multi-scale approach to investigate the interactions among PBCV-1 capsid building units called capsomers. Three binding modes with different strengths are found between capsomers around the relatively flat area of the virion surface at the icosahedral 2-fold axis. Furthermore, a capsomer structure manipulation package is developed to simulate the capsid assembly process. Using these tools, binding forces among capsomers were investigated and binding funnels were observed that were consistent with the final assembled capsid. In addition, total binding free energies of each binding mode were calculated. The results helped to explain previous experimental observations. Results and tools generated in this work established an initial computational approach to answer current unresolved questions regarding giant virus assembly mechanisms. Results will pave the way for studying more complicated process in other biomolecular structures.

Lattice Interactions in Crystals of Soybean Trypsin Inhibitor (Kunitz) Produced by Inclusion of 1,5-Disulfonylnaphthalene

In the course of an earlier investigation into the crystallization of proteins based on the addition of intermolecular ligands, the Kunitz type trypsin inhibitor from soybean (SBTI) was crystallized as a complex with 1,5-disulfonylnaphthalene (ligand library 21D). The two molecules within the asymmetric unit of the monoclinic crystals are related by a near-exact NCS 2-fold axis and have essentially the same conformation as was found for them in previous analyses. The protein dimer is maintained through electrostatic interactions with the sulfonyl groups of four 1,5-disulfonylnaphthalene molecules, which are bound in pairs at the dimer interface and involve symmetrical pairs of arg 30 and arg 47 side chains of each SBTI molecule. The binding of the 1,5-disulfonylnaphthalene molecules at the interface is disordered in that only a coordinated single pair of 1,5-disulfonylnaphthalene molecules can be bound at any one time. There are also molecules of the MES buffer present in the crystal structure that are re...

Structural Basis for Neutralization and Protection by a Zika Virus-Specific Human Antibody

We previously reported a human monoclonal antibody, ZK2B10, capable of protection against Zika virus (ZIKV) infection and microcephaly in developing mouse embryos. Here, we report the structural features and mechanism of action of ZK2B10. The crystal structure at a resolution of 2.32Å revealed that theepitope is located on the lateral ridge of DIII of the envelope glycoprotein. Cryo-EM structure with mature ZIKV showed that the antibody binds to DIIIs around the icosahedral 2-fold, 3-fold, and 5-fold axes, a distinct feature compared to those reported for DIII-specific antibodies. The binding of ZK2B10 to ZIKV has no detectable effect on viral attachment to target cells or on conformational changes of the E glycoprotein in the acidic environment, suggesting that ZK2B10 functions at steps between the formation of the fusion intermediate and membrane fusion. These results provide structural and mechanistic insights into how ZK2B10 mediates protection against ZIKV infection.

The structure of human apolipoprotein C-1 in four different crystal forms

Human apolipoprotein C1 (APOC1) is a 57 amino acid long polypeptide that, through its potent inhibition of cholesteryl ester transferase protein, helps regulate the transfer of lipids between lipid particles. We have now determined the structure of APOC1 in four crystal forms by X-ray diffraction. A molecule of APOC1 is a single, slightly bent, α-helix having 13–14 turns and a length of about 80 Å. APOC1 exists as a dimer, but the dimers are not the same in the four crystals. In two monoclinic crystals, two helices closely engage one another in an antiparallel fashion. The interactions between monomers are almost entirely hydrophobic with sparse electrostatic complements. In the third monoclinic crystal, the two monomers spread at one end of the dimer, like a scissor opening, and, by translation along the crystallographic a axis, form a continuous, contiguous sheet through the crystal. In the orthorhombic crystals, two molecules of APOC1 are related by a noncrystallographic 2-fold axis to create an arc of about 120 Å length. This symmetrical dimer utilizes interactions not present in dimers of the monoclinic crystals. Versatility of APOC1 monomer association shown by these crystals is suggestive of physiological function.

Condensation of ammonium niobium oxalate studied by NMR crystallography and X-ray powder diffraction

Unusual structure transformation in NH4[NbO(C2O4)2(H2O)2]∙nH2O was discovered and investigated by combination of techniques including NMR crystallography (variable temperature 1H, 2H, 13C and 93Nb solid-state NMR methods), X-Ray powder diffraction, simultaneous thermal analysis and DFT calculations. It has been revealed that the mixture of known oxalate phases NH4[NbO(C2O4)2(H2O)2]∙3H2O (Phase I) and NH4[NbO(C2O4)2(H2O)2]·2H2O (Phase II) treated at mild condition (temperature up to 100 °C in vacuo) induces an unknown crystal phase, catena-NH4[NbO2/2(C2O4)2(H2O)] (Phase III). The new orthorhombic phase has polymeric structure consisted of 7-coordinated niobium fragments [NbO2/2(C2O4)2(H2O)] connected by oxygen bridges (NbONb) forming the infinite zigzag chains along the c→ axis. The bridging oxygen atoms are connected to Nb symmetrically with respect to the 2-fold axis. Each of them forms two identical bonds Nb-O of 1.892(6) Å length, indicating their origination from the condensation process. The niobium coordination polyhedron can be crossed by the plane passing through the Nb, (O)2/2, (H2O) atoms. The oxalate groups lie in the opposite sides from the plane. In the new phase, 93Nb has unusually small nuclear quadrupole coupling constant mainly due to the developed thermal mobility of the crystal lattice. Variable temperature 93Nb, 2H and 13C NMR experiments together with DFT calculations confirm that the new Phase III has proton and ligand mobility. This mobility of the lattice correlates with the fact that hydrogen bonds network stabilizing the structure of Phases I and II practically disappear in the new Phase III.

Coordination design of cadmium ions at the 4-fold axis channel of the apo-ferritin cage.

Spherical protein cages with highly symmetrical structures provide unique environments for the conjugation of metal ions and metal nanoparticles. Ferritin has been widely studied as a template for the coordination of metal ions and metal nanoparticles in fundamental research and applications. However, it remains difficult to design metal coordination sites precisely. In this work, we describe the design and construction of new metal coordination sites by introducing Cys residues at the 4-fold symmetrical hydrophobic channel of apo-ferritin. X-ray crystal structure analyses of the mutants containing Cd(ii) ions show that the four or eight binding sites for Cd(ii) ions are located at the 4-fold symmetrical axis channel of apo-ferritin. It was found that the coordination number and configuration of Cd(ii) ions can be varied by adjusting the positions of the Cys residues at the symmetrical channels of the apo-ferritin cage.

Modeling of quasicrystal lattices with a 4-fold symmetry axis

The construction method of a quasilattice with a four-fold rotational symmetry axis is proposed. The described method is based on the recurrent generation of the initial group of lattice points, which are a set of vertices of a square. The aperiodic crystal reciprocal lattice modeling algorithm is analyzed. Used modeling technique is compared with conventional projection approach. The orthogonal basis of a four-dimensional hypercubic lattice is proposed. This lattice produces two-dimensional quasicrystal with a four-fold symmetry axis after it projection on a flat surface. It is shown that the indexation of diffraction pattern of similar quasiperiodic structures can be carry out using 3 integer indexes, which is analogous to the indexing system proposed by Cahn for application to icosahedral quasicrystals.