24-h Test Research Articles

Sublethal and lethal toxicity assessment of lanthanum and gadolinium to Daphnia magna in a 7-day test method.

The use of rare earth elements has increased in recent years, leading to a rise in environmental concentrations. Despite the growth in number of studies regarding toxicity, knowledge gaps remain. For Daphnia magna, standardized test methods involve exposure periods of either 48 h or 21 days to assess toxicological effects. In this study, the exposure period was adjusted to 7 days to evaluate sublethal endpoints not measurable in 48-h tests. Additionally, this approach enabled us to obtain results within a shorter time frame than that required for 21-day tests. This study focused on the individual toxicity of lanthanum (La) and gadolinium (Gd) to Daphnia magna. We assessed mortality, feeding rate, somatic growth, and maturity under static conditions, modifying the media by adding MOPS buffer to maintain an initial pH of 6.8 and providing Raphidocelis subcapitata as a daily food source. Results showed that the solubility of La decreased considerably, with the highest recovery rate dropping from 133.33% at the start to 32.73% by the end of the 7-day exposure period. In contrast, Gd solubility remained stable, with a recovery rate of 86.88% at the start and 81.30% at the end of the test. Daily lethal concentrations (LCx) were calculated, revealing LC10 values on the first day, LC20 on the second day, and LC50 by the third day for La and the second day for Gd. By the test's end, the LC10, LC20, and LC50 values were 30.40, 78.96, and 403.67 µg L-1 for La, and 10.67, 33.73, and 241.28 µg L-1 for Gd. For the sublethal endpoints, maturity was the most sensitive endpoint with the EC20 and EC10 corresponding to 0.79 and 0.26 µg L-1 for La and 0.39 and 0.14 µg L-1 for Gd. Gd had a higher toxicity in all endpoints assessed. While a thorough comparison to existing literature remains challenging due to variations in endpoints assessed, the methodology employed in this study yielded a range of informative results. This approach provides a useful range-finding test for Daphnia magna toxicity assessments, particularly for preliminary screening, and may complement standardized methodologies.

Release of PAHs from reclaimed asphalt mixtures into the water environment after passivation by cold in-place recycling technology.

The paper deals with an analysis of the amount of 16 polycyclic aromatic hydrocarbons (PAHs (Polycyclic aromatic hydrocarbons-16 defined by US EPA.)) released from reclaimed asphalt mixtures used in base layers of road surfaces and in binder layers in road construction using cold in-place recycling. For the ten samples tested, the sum of 16 PAHs was determined directly for the crushed asphalt mixture and for its 24-h leachate. The crushed asphalt samples were used to make cylindrical asphalt specimens of the cold recycling mixture. The asphalt specimens were prepared to simulate as realistically as possible the use of the mixtures in road reconstructions implementing the cold in-place recycling technology, which should ensure the passivation of PAHs. The asphalt specimens were subjected to a dynamic leaching test under laboratory conditions with regular replacement of the leaching liquid. The results showed that the concentration of PAHs released into the water environment from the test specimens (passivated material) was approximately 40-50% lower than the amount of PAHs released from the asphalt mixtures in the 24-h leaching test. When compared to the input PAH concentrations in the asphalt mixtures (36-1323mg.kg-1), on average, only 0.15% of PAHs is released from the passivated material. Dynamic leaching test has shown that the wrapping of the original asphalt mixture with a new binder and its subsequent compaction leads to the preservation of PAHs in the original material at such a level that their total concentrations are reduced by two orders of magnitude.

A clinical examination of OPTIMAL theory application in people with multiple sclerosis: a proof-of-concept study and implications for rehabilitation practice.

We investigated the potential to improve motor learning and performance in people with multiple sclerosis (PwMS) with OPTIMAL theory conditions. OPTIMAL theory predicts that three main factors [i.e. autonomy support (AS), enhanced expectancies (EE), and external focus (EF)] facilitate performance and learning. We examined whether the implementation of all three combined in a consecutive manner during practice would be beneficial for the motor learning and performance in a clinical population facing physical, cognitive, and emotional challenges. Thirty PwMS with mild-to-moderate disability (Expanded Disability Status Scale = 2.0-5.0) were randomly assigned to one of two groups (optimized and control) and practiced a novel motor-cognitive task involving rapid square-stepping to memorized patterns. Following a pretest (no group difference), optimized group participants practiced under each of three factors across practice phase (EE: feedback after good trials; AS: choice of mat color; and EF: external focus to the mat). Control group participants practiced under neutral conditions. The optimized group had significantly shorter movement times than the control group in the practice phase [174.7 (27.4) s vs. 236.8 (35.8) s, P < 0.0001], on the 24-h retention test [69.3 (9.3) s vs. 159.7 (15.5) s, P < 0.0001], and the 24-h transfer test [146.1 (14.9) s vs. 223.1 (38.9) s, P < 0.0001]. Thus, optimized practice combining AS, EF, and EE enhanced motor skill learning. Key factors in the OPTIMAL theory can be used to improve patients' motor learning. Further studies are warranted to extend these proof-of-concept observations for potential clinical applications.

Bariatric surgery blunts nitrate-mediated improvements in cardiovascular function of overweight women by interfering with gastric S-nitrosothiol formation.

Inorganic nitrate (NO3-) and nitrate-rich foods have been shown to exert antioxidative effects and lower blood pressure in experimental animal models and human clinical studies. The specific handling of nitrate, including its enterosalivary recirculation, secretion into saliva, oral microbial reduction to nitrite (NO2-), and the pH-dependent nitrosative capacity in the stomach have all been recognized as being important for nitrate's beneficial effects. Obesity is of major health concern worldwide and associated with increased cardiovascular risk; whether nitrate lowers blood pressure and improves endothelial function in this setting has not been investigated. We here tested the hypotheses that i) nitrate elicits cardiovascular benefits in overweight women; and ii) these beneficial effects would be diminished in women who underwent bariatric Roux-en-Y gastric bypass (RYGB) surgery. Our controlled clinical trial included 15 women with prior RYGB surgery and 15 overweight female controls. All participants received a single dose of 0.1mmol/kg/day nitrate in the form of a beetroot extract for 14 days. Blood collection, 24-h ambulatory blood pressure measurements and endothelial function tests were performed before and after nitrate treatment. Plasma nitrite, nitrate, and S-nitrosothiol (RSNO) concentrations were determined by ozone-based reductive chemiluminescence while thiobarbituric acid reactive substances (TBARS) and total antioxidant capacity (TAC) were measured using plate-reader based assays. Nitrate reduced blood pressure and improved endothelial function in controls, but not in women with prior bariatric surgery. Nitrate also increased circulating nitrate/nitrite and RSNO levels in controls, but the latter was blunted following RYGB surgery despite even larger increases in nitrite concentrations. Similarly, nitrate increased antioxidant responses in controls but not in women with prior bariatric surgery. This is the first study to show that nitrate exerts beneficial cardiovascular effects in obesity and that the morphological/functional modifications elicited by RYGB surgery abrogates nitrate's effectiveness by preventing gastric RSNO formation.

Nematodes exposed to furfural acetone exhibit a species-specific vacuolar H+-ATPase response

Furfural acetone (FAc) is widely used as an additive by the food industry, as well as an intermediate in several fine chemical industries. Its nematicidal activity against the free-living model organism Caenorhabditis elegans and the parasitic nematode Meloidogyne incognita are well known, but its molecular mechanism of action remains unclear. To deep this subject, we performed 48-h lethal tests on eight nematode species, encompassing free-living, plant-parasitic, and animal-parasitic nematodes. Our results revealed that FAc possesses broad-spectrum nematicidal activity, with potent effects against parasitic nematodes such as Strongyloides stercoralis and M. incognita. In contrast, it exhibited weak activity against the free-living nematode C. elegans, suggesting its potential as a selective nematicide. Our investigation unveiled that FAc binds to the vacuolar H+-ATPase subunits VHA-12 and VHA-13, accelerating intestinal cell necrosis and leading to the death of C. elegans. It is the first discovery that VHA-12 and VHA-13 can serve as target proteins for triggering nematode cell necrosis. The interaction results indicated that FAc targets proteins VHA-12 and VHA-13 of different nematodes and confers broad-spectrum nematicidal activity. And the Spearman analysis results illustrated that the differential nematicidal activity of FAc against various nematodes is attributed to variations in the sequence and structure of the receptor proteins VHA-12 and VHA-13 among different nematode species. Our results illuminate the molecular mechanism underlying the differential toxicity of FAc to different nematodes, and provide valuable data for the comprehensive risk assessment of FAc release into the environment.

Developing Schottky high-controductivity Ti3C2TX MXene/Ni2P/NF heterojunction with modulating surface electron density to boost hydrogen evolution reaction

Nickel-based transition metal electrocatalysts for water electrolysis are promising alternatives to precious metal based electrocatalysts, due to their high activity, low cost, and relatively high stability, offering broad prospects for application in hydrogen production via water electrolysis. Modifying nickel-based transition metal electrocatalysts with phosphorus elements and Schottky heterojunction interfaces can influence the electronic state of the metal, thus enhance the electrocatalytic performance of the catalyst. In this study, a phosphor modified nickel-based electrocatalyst, i.e. MXene/Ni2P/NF electrode material was obtained by assembling Ni2P nanosheets on a nickel foam (NF) substrate and then depositing MXene nanosheets onto the surface of Ni2P/NF via electrophoretic deposition. Water droplets can wet the interior of the electrode material within 150 ms (below the detection limit), demonstrating excellent hydrophilicity, which facilitates the wettability of the electrolyte and the adsorption/desorption of reaction intermediates. Electrochemical tests revealed that the MXene/Ni2P/NF electrode exhibits an overpotential of only 94 mV at a current density of 10 mA cm−2, with a Tafel slope of 83.7 mV dec−1, in the hydrogen evolution reaction. The overpotential remains virtually unchanged after a 24-h stability test.

Advancing aquaculture: fuzzy logic-based water quality monitoring and maintenance system for precision aquaculture

Aquaculture plays a vital role in global food production, and maintaining optimal water quality is essential for the health and growth of aquatic species. This research addresses the need for an efficient, adaptive solution by introducing an innovative water quality monitoring and maintenance system for aquaculture ponds. Unlike conventional systems, our approach uniquely integrates fuzzy logic with IoT technologies to optimise the precision and adaptability of pond management. The system stands out with its continuous monitoring of critical parameters such as temperature, pH, dissolved oxygen (DO), weather conditions and salinity and its ability to autonomously adjust operational controls, such as aerators and water pumps, based on dynamic environmental changes. This ensures ideal water conditions without manual intervention, providing a reliable and effective solution for aquaculture pond management. This work’s novelty lies in applying fuzzy Logic to handle the complexity and variability of aquaculture environments, allowing for nuanced control decisions that improve water quality management. The system’s efficiency was demonstrated through a 72-h operational test, where it maintained optimal DO and salinity levels, showcasing its reliability and effectiveness in real-world conditions. The fuzzy logic model has demonstrated a commendable accuracy rate of 98%. These results validate the system’s performance and underscore its practical benefits, meeting the demands of aquaculture production and significantly enhancing operational efficiency by enabling remote monitoring and rapid issue identification. This research contributes a robust technological solution for aquafarmers, offering a promising advancement in aquaculture management by improving productivity and ensuring the health and growth of aquatic species.

Fabrication of tight polyamide nanofiltration membrane by using a pyridine-diamine precursor for heavy metal ions removal

Nanofiltration offers a promising solution for removing heavy metal ions from wastewater, thereby mitigating ecological and environmental risks. In this study, we synthesized a novel pyridine-diamine precursor 2,6-dipiperazine pyridine (PyBPIP), and employed it as the sole aqueous monomer to fabricate tight polyamide (PA) nanofiltration (NF) membranes via interfacial polymerization (IP) method with trimesoyl chloride for the separation of heavy metals. The resulting membrane features an ultrathin PA functional layer (approximately 60 nm), a lower molecular weight cut-off of 251 Da, and a weakly negatively charged surface. This NF membrane exhibits competitive water permeance of approximately 7.67 LMH/bar and excellent rejection rates exceeding 98 % for various heavy metals ions including Zn2+, Mn2+, Cu2+, along with outstanding separation performance for other divalent cations. Additionally, the NF membrane also exhibits robust stability during the 72-h operational test. In summary, this study demonstrates the feasibility of designing suitable monomers for the preparation of highly perm-selective NF membranes for the removal of heavy metal ions in wastewater.

Deep eutectic solvent-mediated synthesis of CuCo2O4 @ Sargassum tenerrimum derived carbon heterostructure as an efficient electrocatalyst for oxygen and hydrogen evolution reactions

Developing bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through simple, economical, and innovative methods is vital for sustainable energy conversion. Here, we showcase a green and sustainable approach for synthesizing CuCo₂O₄ - Sargassum Tenerrimum derived carbon composites (CCST) directly from fresh seaweed and a deep eutectic solvent (DES), marking its initial application in HER/OER. The successful transformation of seaweed and metal precursors into CCST was accomplished using a direct pyrolysis method at 900 °C in an inert atmosphere. Here, Seaweed granules acted as the carbon source, with DES employed for its multifunctional properties, including serving as a solvent, a structural template, and a catalyst for fostering material development. When these materials were assessed as electrocatalysts for OER in 1 M KOH media, the optimal catalyst (CCST-9 (1:2)) exhibited a low overpotential of 381 mV at 10 mA cm−2 with a Tafel slope of 44 mV dec−1. In addition, the same material achieved low overpotential of 383 mV at 10 mA cm−2 with a Tafel slope of 100 mV dec−1 when tested as an electrocatalyst for HER in 0.5 M H2SO4 media. Interestingly, CCST-9 (1:2) demonstrated excellent long-term stability in OER in 1 M KOH during a 24-h chronoamperometry test, with only a minor reduction in current density. The present study contributes new perspectives to the development of scalable and high-performance bifunctional catalysts, achieved through an environmentally friendly and cost-effective synthetic strategy.

Exploratory trial of urethral submucosa injection therapy of deflux for stress urinary incontinence after radical prostatectomy

Background: After robot-assisted laparoscopic radical prostatectomy (RARP) for localized prostate cancer, post-operative stress urinary incontinence (SUI) impacts patient quality-of-life (QOL). A simple and less invasive treatment for SUI in these patients is urgently needed. Deflux is a viscous gel that consists of a mixture of sodium hyaluronate and dextranomer beads. It is administered by transurethral approach for the treatment of vesicoureteral reflux. In this study, we aim to establish a minimally invasive treatment for post-prostatectomy SUI through transurethral Deflux injection. Methods: We will perform a single-center, exploratory clinical trial to evaluate the safety and efficacy of transurethral injection of Deflux for SUI after RARP. Inclusion criteria are patients with SUI, a urine leakage volume between 15 and 500 g in a 24-h pad test, and those who use more than two pads per day. Five patients are scheduled to be enrolled in this pilot study. Deflux is injected endoscopically at the 3 o’clock and 9 o’clock positions in the submucosa until coaptation of submucosal bulking is achieved from both intraurethral sides. The primary endpoint is safety following Deflux injection. The secondary endpoint is efficacy on both SUI volume and patients’ QOL. Discussion: The importance of this clinical trial is to propose a new minimally invasive treatment option for male SUI patients after RARP.

Enhanced anammox-mediated nitrogen removal in bioelectrochemical systems at prolonged negative electrode potentials.

Bioelectrochemical anaerobic ammonium oxidation (anammox) systems allow eco-friendly removal of nitrogen from reject wastewater coming from biogas processing as the anammox bacteria have previously shown to have c-type cytochromes acting in the extracellular electron transport (EET) mechanism between the bacteria and electrode. The anammoxosome compartment present in anammox bacteria features a highly curved membrane and contains tubular structures along with electron-dense particles that contain iron, which could enhance the process of EET and enhance nitrogen removal by properly applied potentials. In this study, nitrogen removal was investigated in the electrostimulated anammox nitrogen removal (EANR) cells operated comparatively at open circuit and at applied potentials of - 300mV, - 500mV, and - 700mV vs. Ag/AgCl. At peak performance (at - 700mV vs. Ag/AgCl), the EANR showed up to 140% higher specific nitrogen removal rate (11.2 ± 0.3g N/m2/day) compared to the control reactors without applied potential (8.3 ± 0.2g N/m2/day). The microbial community on the cathode with the applied potential had a higher relative proportion of unclassified Candidatus Brocadia (7.5%) compared to inoculum (> 0.01%), in contrast to cathode without potential (0.74%) and control (0.2%). The EANR system demonstrated to achieve ammonium and nitrite removal efficiencies of 91% and 53%, respectively, during a 24-h test cycle from an initial TN concentration of ~ 100mg N/L. After 150h, it achieved complete removal of all nitrogen compounds, reaching a 100% removal efficiency. The EANR would be very useful in the establishment of field-scale bilateral anammox-bioelectrochemical technology combining microbial fuel cell bioanodes and EANR biocathodes for wastewater treatment.

A high-performance all-day vertical thermoelectric generator based on a double-sided reflective structure

Harvesting environmental energy sources is crucial for achieving renewable energy generation and net-zero emissions. However, ensuring uninterrupted electricity generation from environmental energy sources remains challenging. In this study, we present a simple, compact, and expandable all-day vertical passive thermoelectric generator (V-TEG) with a double-sided reflective structure that simultaneously harnesses solar and space cold energy. Outdoor experimental measurements, combined with finite element simulation analysis, revealed that the optimal angles of the solar reflector relative to the TEG range from 30° to 50°. Additionally, the TEG placed in the north–south orientation was found to enhance its daytime performance. The use of low-cost black paint combined with the solar reflector achieved equivalent spectral selectivity, effectively minimizing the infrared heat loss of the hot end of the TEG. During a 48-h outdoor test, the V-TEG achieved an average daytime power of 112.00 mW/m2 and a peak of 363.42 mW/m2. Comparative experiments demonstrated that the V-TEG outperformed horizontally placed TEG during the daytime. Furthermore, scaling the system by connecting three TEGs in series significantly increased the daily power output. This compact V- TEG system offers a promising solution for long-term power generation in low-power sensors and off-grid communities, supporting renewable energy and carbon neutrality goals.

Synthesis and Performance Evaluation of Metallocene Polyalphaolefins (mPAO) Base Oil with Anti-Friction and Anti-Wear Properties

Anti-wear and anti-oxidation abilities are two key properties of lubricants that play a crucial role in ensuring long-term stable equipment operation. In this study, we aimed to develop a base oil with good anti-oxidation and anti-wear properties for use under extreme pressure. The as-prepared metallocene polyalphaolefin (mPAO) was chemically modified using the trifluoromethanesulfonic acid (TfOH) catalysis through an alkylating reaction with triphenyl phosphorothioate (TPPT). During the experiments, when the reaction temperature exceeded 70 °C or the concentration of TfOH exceeded 2.67%, the β-scission reaction in the alkylation process became significantly more pronounced. The physical and chemical properties of TPPT-modified mPAO (T-mPAO) were evaluated by nuclear magnetic resonance spectroscopy, Fourier trans-form infrared spectroscopy, gel–permeation chromatography, and ASTM standards. T-mPAO showed significantly improved antioxidant capacity, with the initial oxidation temperature increasing by 32 °C compared to the base oil, and it exhibited the slowest increase in acid number in the 96-h oven oxidation test. The tribological tests showed that T-mPAO had the lowest friction coefficient, wear track, and wear rate (72.7% lower than that of mPAO) as well as the highest PB (238 kg) and PD (250 kg) among all tested samples. Compared to mPAO, the average friction coefficient of TPPT-modified mPAO in the four-ball friction test was reduced by 30.5%, and by 16.4% in the TE77 reciprocating friction test. Based on the experimental results, T-mPAO had strong anti-oxidation ability and excellent lubricating performance.The successful synthesis of multifunctional mPAO has enabled lubricant base oil additization, making it possible to use it in more demanding work scenarios, greatly broadening its application scope and making lubricant formulation blending more flexible.

The Clinical Symptoms and Psychological Status of Biofeedback Electrical Stimulation Combined with Pelvic Floor Muscle Training during the Treatment of Mild Stress Urinary Incontinence after Holmium Laser Enucleation of the Prostate

Introduction: To study the clinical symptoms and psychological status of biofeedback electrical stimulation combined with pelvic floor muscle training during the treatment of mild stress urinary incontinence (SUI) after holmium laser enucleation of the prostate (HoLEP). Methods: Group A was treated by biofeedback and electrical stimulation; Group B was treated by pelvic floor muscle training; and Group C was treated by biofeedback and electrical stimulation combined with pelvic floor muscle training. Patients in the 3 groups had follow-up evaluations every 8, 16, and 24 weeks. Clinical symptoms of urinary incontinence were assessed using the 24-h urinary pad test, the Incontinence Questionnaire-Urinary Incontinence Short Form (ICIQ-UI-SF); and psychological status was evaluated using the modified Hospital Anxiety Depression Scale (HADS). Results: The results of ICIQ-UI-SF showed that there were differences within and between the three groups at 8 weeks, 16 weeks, and 24 weeks (p < 0.05). The results of the 24-h pad tests were similar (p < 0.05), except for no difference between group B and group C at 8 weeks (p > 0.05). In the study with the score of HADS >35, the differences among the three groups were statistically significant (p < 0.05). There was no significant difference among the three groups at 0 and 8 weeks (p > 0.05). There were differences in the results between group C and the other two groups at 16 and 24 weeks of treatment (p < 0.05). For patients with HADS <35 at week 0, the results were basically the same except for the difference between groups at week 8. HADS of all patients were no statistical difference (p > 0.05). Conclusions: Biofeedback electrical stimulation combined with pelvic floor muscle training is an efficient nonsurgical combination therapy for the symptoms of SUI after HoLEP for benign prostatic hyperplasia. In addition, the recovery of the patient’s psychological state does not coincide with the recovery of urinary incontinence; therefore, we propose that patients still need additional psychological treatment after SUI disappears.

Clinical efficacy of a rehabilitation management protocol for urinary incontinence after robot-assisted laparoscopic prostatectomy

ObjectiveTo evaluate the application of a rehabilitation management protocol for urinary incontinence after robot-assisted laparoscopic prostatectomy (RALP).MethodsWe conducted a retrospective cohort study of 114 patients who underwent RALP between August 2021 and November 2021 as the control group and a prospective analysis of 114 patients who underwent RALP between May 2022 and August 2022 as the experimental group. The rehabilitation management protocol focused on preoperative stage, postoperative care, day of catheter removal, 1 month postoperative, 3 months postoperative, 6 months postoperative, and 12 months or more postoperative.ResultsThe 24-h pad test was significantly lower in the experimental group compared with the control group at 2 and 6 months after RALP (both P < 0.01). The scores of the international consultation on incontinence questionnaire-short form (ICIQ-SF) in the experimental group were significantly lower than those in the control group at 1 month after RALP (P < 0.01).The scores of quality of life in the experimental group were significantly higher than those of the control group at 1, 2, and 6 months after RALP (all P < 0.01).The scores of Broome Pelvic Muscle Self-efficacy Scale (BPMSES) were lower than those of the control group at 1, 2, 3, and 6 months after RALP (all P < 0.01).ConclusionThe application of the rehabilitation management protocol had significant beneficial effects on urinary functions and quality of life in patients with prostate cancer after RALP.

Outcomes of the Victo™ adjustable artificial urinary sphincter in the treatment of male incontinence.

To report the clinical outcomes of the Victo™ (Promedon, Cordoba, Argentina) adjustable artificial urinary sphincter (AUS) implantation in a cohort of patients with severe urinary incontinence (UI) after prostate surgery. This study enrolled patients with UI following prostate surgery who underwent a Victo implantation between May 2018 and December 2023. Patients were prospectively evaluated at baseline, and at 3 and 12 months after device activation, and thereafter annually. The 24-h pad-weight test (24hPWT) was used to assess severity of UI, while the Patient Global Impression of Improvement (PGI-I) and patient satisfaction according to a Likert scale were used to measure patient-reported outcomes. A total of 96 patients with a median (interquartile range [IQR]) age of 68 (65-72) years were included in the final analysis. The median (IQR) follow-up was 3 (1-4) years. In all, 10 patients completed the 5-year follow-up. After the treatment, we observed a significant reduction in 24hPWT by the median of 83% (P < 0.001) at 3 months and by a median of 79% (P < 0.001) at 3 years. According to the PGI-I, a total of 87%, 92%, 87%, 81%, 83%, and 50% (five of 10) of patients rated their condition/incontinence as 'very much improved', 'much improved' or 'little improved' at 3 months, 1-, 2-, 3-, 4-, and 5-year follow-up visits, respectively. The proportion of patients, who were 'very satisfied' or 'satisfied' with the treatment outcome was 79%, 80%, 75%, 69%, 80%, and 60% (six of 10) at 3 months, 1-, 2-, 3-, 4-, and 5-years, respectively. There were a total of 13 (14%) device failures during the follow-up period. In conclusion, our data suggest that Victo AUS significantly reduces the severity of UI after prostate surgery and provides a reasonably high patient-reported satisfaction with treatment outcomes at mid-term follow-up.

Urine Protein to Creatinine Ratio for the Assessment of Bevacizumab-Associated Proteinuria in Patients with Gynecologic Cancers: A Diagnostic and Quality Improvement Study.

Proteinuria is a common adverse event arising from treatment with bevacizumab, requiring diagnostic testing via 24-h urine collection. However, this method is cumbersome. We assessed urine screenings in gynecologic cancer patients from February 2021 to May 2022. Along with a simple urine dipstick (UD), the urine microalbumin, total protein, and creatinine were measured and calculated as the urine albumin to creatinine ratio (UACR) and the urine protein to creatinine ratio (UPCR), which were further adjusted through the Modification of Diet in Renal Disease and Chronic Kidney Disease Epidemiology Collaboration equations to be estimated and correlated with 24-h urine total protein content. The incremental cost-effectiveness ratio was used for cost analysis. There were 129 urine samples from 36 patients. The sensitivity and specificity for the UACR were 0.56 and 0.97, and for the UPCR, 0.71 and 0.88, respectively. The 24-h TP correlated strongly with the UACR (r = 0.75; p < 0.001) and UPCR (r = 0.79; p < 0.001) and fair for the simple UD (r = 0.35; p < 0.001). The UPCR saves one unnecessary 24-h urine test for less than a dollar compared to a simple UD. The results indicate that using the UPCR could enhance diagnostic accuracy, lower costs, and reduce unnecessary 24-h urine sampling.

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Electrocatalytic nitrate reduction reaction presents a promising avenue for environmentally friendly ammonia (NH3) synthesis and wastewater treatment. An essential aspect to consider is the meticulous design of electrocatalysts. This study explores the utilization of a Ni-Co alloy nanosheet-decorated three-dimensional titanium dioxide (3D-TiO2) nanobelts electrodeposited on titanium meshes (NixCoy@TiO2/TM) for efficient electrocatalytic NH3 production. The optimized Ni1Co3@TiO2/TM electrode achieves a significant NH3 yield of 676.3 ± 27.1 umol h−1 cm−2 with an impressive Faradaic efficiency (FE) of 95.1 % ± 2.1 % in a 0.1 M KOH solution containing 0.1 M NO3− at −0.4 V versus the reversible hydrogen electrode. Additionally, the electrode demonstrates exceptional electrochemical activity for NH3 synthesis in simulated wastewater, delivering an outstanding NH3 yield of 751.6 ± 44.3 umol h−1 cm−2 with a FE of 96.8 % ± 0.4 % at the same potential of −0.4 V. Moreover, the electrode exhibits minimal variation in current density, NH3 yields and FEs throughout the 24-h stability test and the 20-cycle test, demonstrating its excellent stability and durability. This study offers a straightforward electrodeposited approach for the development of 3D-nanostructured alloys as catalysts for NH3 electrosynthesis from nitrates at room temperature.

Reasonable construction of low migration energy barrier and continuous proton transfer channels via bimetallic MOFs nanofibers (MIL-(Cr Al)–NH2) for its composite proton exchange membrane

Reasonable construction of low migration energy barrier and continuous proton transfer channel is the key to improving the performance of composite proton exchange membranes. In this paper, we prepared a novel bimetallic MOFs (MIL-(Cr Al)–NH2) nanofibers (MCANs) consisting of Cr and Al elements by electro-blown spinning method (EBS) and hydrothermal synthesis, and subsequently introduced them into non-fluorinated sulfonic acid polymer sulfonated polysulfone (SPSF) matrix to obtain composite proton exchange membranes (MCANs@SPSF). Importantly, MCANs successfully constructed relatively long-range continuous unsaturated metal site proton transfer channels provided by the Cr-based MOFs, thereby reducing the proton migration energy barrier in the MCANs@SPSF, which confirmed by the density functional theory (DFT) calculation. In detail, DFT studies indicated that the migration energy barrier between H+ and MCANs was 1.677 eV, while that of single Al-based MOF (MAN) and single Cr-based MOF (MCN) were 1.879 eV and 1.762 eV respectively. The existence of efficient low migration energy barrier and continuous proton transfer channels made the proton conduction efficiency of MCANs@SPSF greatly improved, that was under the condition of 80 °C and 100 % RH, the proton conductivity of MCANs@SPSF reached the maximum value of 0.358 S cm−1 and the power density reached 104 mW cm−2. Moreover, MCANs@SPSF-5 displayed best DMFC durability performance with only 14.65 % voltage loss under 24h test. In addition, due to the acid-base pair interaction between MCANs and SPSF enhanced the interface binding force between the two phases, meanwhile, the pore structure of MOFs also had a certain adsorption effect on methanol, thus reducing the methanol permeability, and the addition of 5 wt% MCANs in SPSF was tested to reduce the methanol permeability to 5.53 × 10-7 cm2 s−1. Overall, this work provided a new strategy for construction of low migration energy barrier and continuous proton transfer channels, which was beneficial for the development of high performance proton exchange membranes.

Acute and chronic effects of the antifouling booster biocide Irgarol 1051 on the water flea Moina macrocopa revealed by multi-biomarker determination

Irgarol 1051 is an herbicide extensively utilized in antifouling paint due to its ability to inhibit photosynthesis. Irgarol and its photodegradation products are highly persistent in waters and sediments, although they are present in low concentrations. However, our understanding of the harmful effects of Irgarol on non-target organisms remains limited. In this study, we assessed the effects of acute (24 h) and chronic (14 days across three generations) exposure to different concentrations (including the 1/10 NOEC, NOEC, and 1/10 LC50 calculated from the 24-h acute toxicity test) of Irgarol using the water flea Moina macrocopa. Acute exposure to 1/10 LC50 significantly decreased survival, feeding rate, thoracic limb activity, heart rate, and acetylcholinesterase activity. Elevated levels of intracellular reactive oxygen species and malondialdehyde, along with a significant increase in catalase and superoxide dismutase activity, suggested the induction of oxidative stress in response to 1/10 LC50. An initial boost in glutathione level and the enzymatic activities of glutathione peroxidase and glutathione reductase, followed by a plunge, implies some compromise in the antioxidant defense system. Upon chronic exposure to the NOEC value, both generations F1 and F2 displayed a significant decrease in survival rate, body length, number of neonates per brood, and delayed sexual maturation, suggesting maternal transfer of potential damage through generations. Taken together, Irgarol induced acute toxicity through physiological and cholinergic damage, accompanied by the induction of oxidative stress, in the water flea. Even its sub-lethal concentrations can induce detrimental effects across generations when consistently exposed.