2-formylbenzoic Acid Research Articles

Propylphosphonic anhydride (T3P®) mediated synthesis of 3-oxoisoindoline-1-carboxamides from 2-formylbenzoic acid, amines, and isocyanides. Preparation of isoindolinone alkaloids

Propylphosphonic anhydride (T3P®) was successfully applied to the synthesis of an isoindolinone library by the utilization of an Ugi four-center, three-component reaction (Ugi-4C-3CR). The use of T3P® significantly shortened the required reaction time and the corresponding products were obtained in good to high yields. Moreover, a side-reaction was observed when phenylethylamine derivatives and tryptamine were used as the amine component. The latter reaction was applied to the microwave-assisted, one-pot synthesis of the isoquinoline alkaloid (±)-nuevamine. Surprisingly, the traditional Ugi four-component reaction (Ugi-4CR) was unsuccessful in the presence of T3P®. In this case an α-amino amide was produced excluding the carboxylic acid from the multicomponent reaction.

Efficient PhB(OH)2-catalyzed one-pot synthesis of 3-substituted isoindolin-1-ones and isobenzofuran-1(3H)-ones under solvent free conditions

An efficient and practical one-pot synthesis of 3-substituted isoindolin-1-ones and isobenzofuran-1(3H)-ones has been developed under solvent free-conditions using non-toxic and cheap phenylboronic acid as excellent catalyst. This strategy involves the sequential two-step Mannich/lactamization cascade reaction of inexpensive 2-formylbenzoic acid with primary amines and a wide variety of ketones, and an aldol/lactonization cascade reaction of 2-formylbenzoic acid with a broad range of ketones.

X-Ray Crystal Structure and Cation Binding Properties of a New Phthalide-fused Indoline Derivative

An efficient and a green route to synthesize phthalide-fused indoline, 3-[(5-chloro-1,3,3-trimethylindolin-2-ylidene)methyl] isobenzofuran-1(3H)-one (3) has been developed by the coupling reaction of 5-chloro-2-methylene-1,3,3-trimethylindoline, 1 and 2-formylbenzoic acid, 2 under solvent-free domestic microwave irradiation. The compound was produced in 85% yield. Compound 3 was characterized by analytical and spectral methods and its structure was confirmed by chemical crystallography. Compound 3 was successfully crystallized in triclinic system with space group Pī. The molecular structure consists of fused 1 and 2 groups connected by the enamine carbon. Binding study of 3 towards different types of metal cations was done by colorimetric detection and UV-vis titrations. Compound 3 exhibited good selectivity and sensitivity for Sn2+ compared to other metal cations tested. The stoichiometric binding ratio of 3 toward Sn2+ is found to be 1:1 and the binding constant (Ka) is 1.07×104 M–1 on the basis of Job’s plot and Benesi-Hildebrand analysis.

Still Unconquered: Enantioselective Passerini and Ugi Multicomponent Reactions.

The Passerini three-component (P-3CR) and the Ugi four-component (U-4CR) are two of the most prominent isocyanide-based multicomponent reactions (IMCRs). The P-3CR transforms isocyanides, aldehydes (ketones), and carboxylic acids to α-acyloxy carboxamides, while the U-4CR converts isocyanides, aldehydes (ketones), amines, and carboxylic acids to α-acetamido carboxamides. Conversion of the high energy formal divalent isocyano carbon into a tetravalent amide carbonyl carbon provides the driving force for these reactions. While the prototypical P-3CR and U-4CR provide linear adducts, many heterocycles and macrocycles are now readily synthesized by modifying these truly versatile reactions. As one stereocenter is generated by the nucleophilic addition of the isocyanide to the carbonyl and imine functions, the search for enantioselective versions of these reactions has become a much sought after goal among synthetic chemists. This seemingly trivial endeavor turns out to be extremely difficult to achieve, in sharp contrast to the remarkable progress documented in the field of asymmetric synthesis in general and catalytic enantioselective nucleophilic addition to C═X bond in particular. Since Denmark's first report in 2003 on the catalytic enantioselective Passerini two-component reaction of isocyanides with aldehydes, several Lewis acid (LA) and Brønsted acid-catalyzed enantioselective protocols have been developed. However, it is fair to say that truly catalytic enantioselective P-3CR and U-4CR with wide application scope remain elusive. In this Account, we summarize the progress recorded in this field over the past 15 years. We entered the field by investigating the enantioselective reaction of α-isocyanoacetamides with aldehydes and imines, which was previously developed in our lab for the synthesis of functionalized 5-aminooxazoles. Our initial experimental results, in conjunction with Dömling's and Schreiber's earlier findings, prompted us to assume that the low turnover number in LA-catalyzed asymmetric IMCRs is a main hurdle for enantioselectivity. We speculated that the LA incapable of forming chelates would be the catalyst of choice for enantioselectivity, the rational being that the P-3CR and the U-4CR afforded bidentate intermediates (α-hydroxy imidates, α-amino imidates) and products (α-acyloxy carboxamides, α-acetamido carboxamides) from nonchelating inputs. Therefore, the transfer of catalyst from these chelating intermediates or products to the monocoordinating starting materials would be difficult, hence the problem with catalyst turnover. This working hypothesis turned out to be a valuable guide that allowed us to develop Al-salen and Al-phosphate-catalyzed enantioselective P-3CR and enantioselective construction of chiral heterocycles such as oxazoles and tetrazoles. Nevertheless, all our attempts to apply these LA catalysts to the Ugi reaction failed. Indeed, to date, no reports on the successful LA-catalyzed asymmetric Ugi-type reactions exist in the literature. However, significant progress has been made in recent years employing organocatalysts. We developed a chiral phosphoric acid (CPA)-catalyzed enantioselective three-component synthesis of 2-(1-aminoalkyl)-5-aminooxazoles, a four-component synthesis of epoxy-tetrahydropyrrolo[3,4- b]pyridin-5-ones and a Ugi four-center, three-component reaction of isocyanides, anilines, and 2-formylbenzoic acids for the synthesis of isoindolinones. Other groups have found that chiral dicarboxylic acid and BOROX are effective catalysts for truncated Ugi three-component reactions.

Hantzsch ester triggered metal-free cascade approach to isoindolinones

Disclosed herein is an expedient synthesis of biologically important isoindolinone derivatives from reactions of 2-formylbenzoic acids with various amines. This method operates via a deliberately designed catalyst-free tandem reductive amination/cyclization cascade event triggered by a transfer hydrogenation process with easily available Hantzsch ester as the organic hydride source. The ease of operation, mild reaction conditions, facile accessibility of the starting materials, and easy scalability of the current method distinguish it from the other precedent protocols, thus enable it a practical approach to the syntheses of valuable isoindolinone-incorporated drugs.

Catalyst-Free Synthesis of 3-(2-Quinolinemethylene)-Substituted Isoindolinones in Water

A facile and environmentally benign approach toward the synthesis of novel 3-alkyl-substituted isoindolinones by three-component reactions of 2-formylbenzoic acids, primary amines and 2-methyl­azaarenes in water under catalyst- and additive-free conditions is described. This protocol features the direct construction of multiple C–N and C–C bonds via a tandem Mannich-type reaction and intramolecular cyclization in a one-pot fashion, affording the desired 3-(2-quinolinemethylene)-substituted isoindolinones in high to excellent yields.

Green synthesis of 2-((2-aryl-3-oxoisoindolin-1-yl)methyl)quinazolin-4(3H)-ones via sequential condensation, sp3 C[sbnd]H bond functionalization and cyclization

A novel and green synthesis of 2-((2-aryl-3-oxoisoindolin-1-yl)methyl)quinazolin-4(3H)-one is described. The one-pot three-component reaction between 2-methylquinazolin-4(3H)-ones, aryl amines and 2-formylbenzoic acid, through a sequential condensation, sp3 CH bond functionalization and cyclization reactions in aqueous media leads to formation of desired compounds in good to excellent yields.

Catalyst-free Mannich-type reactions in water: Expedient synthesis of naphthol-substituted isoindolinones

An environmentally benign while efficient approach to the synthesis of isoindolinones by three-component reactions of 2-formylbenzoic acids, primary amines, 2-naphthols via a Mannich-cyclization reaction sequence in water under catalyst-free conditions is described here. This protocol features wide substrate scope, ease of operation, the use of naturally abundant while enviromentally benign water as a reaction medium and the formation of only water as the sole byproduct in the transformation.

Dual Sequence Control of Uniform Macromolecules through Consecutive Single Addition by Selective Passerini Reaction.

The selective Passerini reactions of 4-formylbenzoic acid and 4-isocyanobenzoic acid with aliphatic isocyanides and aldehydes were utilized to synthesize sequence-defined uniform macromolecules. Our strategy does not involve any protecting groups or reactive group transformation steps and allows direct and consecutive propagation of sequence in each step. Introduction of diverse side groups by using different aliphatic components provided a range of sequence-defined uniform macromolecules in high yield and gram scale. The strategy also allows further Passerini self-coupling or cross-coupling of the formed sequences with other small molecules, affording polymers with up to 5098.3 Da and 20 side groups. Thus, this strategy will show promise for more efficient synthesis of new sequence-defined macromolecules.

Sustainable synthesis of 3-substituted phthalides via a catalytic one-pot cascade strategy from 2-formylbenzoic acid with β-keto acids in glycerol

Background: Phthalides are privileged constituents of numerous pharmaceuticals, natural products and agrochemicals and exhibit several biological and therapeutic activities. Therefore, the development of new, facile, and sustainable strategies for the construction of these moieties is highly desired.Results: A broad substrate scope for β-keto acids was found to be strongly compatible with this catalytic process, affording a wide variety of 3-substituted phthalides in good to excellent yields.Conclusion: A concise and efficient synthesis strategy of 3-substituted phthalides from 2-formylbenzoic acid and β-keto acids via a catalytic one-pot cascade reaction in glycerol has been accomplished.

A facile and efficient method for the synthesis of N -substituted isoindolin-1-one derivatives under Pd(OAc) 2 /HCOOH system

A facile and efficient method for the synthesis of N-substituted isoindolin-1-one derivatives from 2-formylbenzoic acid and amine under Pd(OAc)2/HCOOH system has been described. The whole process is carried out in ligand-free conditions and furnished the desired products by reductive intramolecular cyclization. Furthermore, this procedure is applied successfully for the modification of natural products, such as vindoline and estrone.

A pH-responsive glycolipid-like nanocarrier for optimising the time-dependent distribution of free chemical drugs in focal cells

Though Drug delivery systems have achieved accumulation at tumor sites via passive targeting and active targeting, the therapeutic effects are far from perfect. The unsatisfactory results are mainly due to limited drug release from the nanocarriers at tumor sites, while the pharmacological activities of the drug are attributed to the concentration of the free drug and the time maintained at the pharmacological targets. A pH-responsive chitosan based glycolipid-like nanocarrier (CSO-FBA-SA) was fabricated by conjugating stearyl alcohol (SA) to chitosan oligosaccharide (CSO) with the linkage of 4-formylbenzoic acid (FBA). FBA was a kind of aromatic aldehyde carbonyl compounds, which can form the benzoic-imine bond. In the presence of a Schiff’s base structure, the carrier showed improved properties and could be quickly degraded in an acidic environment. In order to explore the process and mechanism of the nanocarriers in focal cells, the method for determining the intracellular concentration of released free doxorubicin was established, and the time-dependent change of the DOX-loaded micelles was revealed. The sight of drug release was also obtained with CLSM. The cytotoxicity of the CSO-FBA-SA/DOX against human breast cancer MCF-7 cells increased by 2.75-fold and 3.77-fold in comparison with the CSO-SA/DOX and DOX, respectively. Furthermore, the CSO-FBA-SA/DOX showed a 2.12-fold higher cytotoxicity against the MCF-7 cells than that treated against human ovarian cancer SKOV-3 cells with lower intracellular pH value, which indicated that the cellular inhibition positively correlated with the intracellular pH value. High tumor accumulation and fast drug release of the CSO-FBA-SA/DOX in tumor was responsible for the remarkable tumor growth inhibitory effect. Moreover, the CSO-FBA-SA/DOX could selectively respond to the acidic environment and release DOX in tumor only, which had relatively minimal cytotoxicity towards normal tissues. The results showed that this newly developed glycolipid-like nanocarrier could act as a potential vector for delivering the drug effectively with a low systemic toxicity.

Enhancement in compressive strength and UV ageing-resistance of poly(p-phenylene benzobisoxazole) nanocomposite fiber containing modified polyhedral oligomeric silsesquioxane

Modified polyhedral oligomeric silsesquioxane (m-POSS) from trisilanol isobutyl POSS and 4-formylbenzoic acid was synthesized and used for polymerization of poly(p-phenylene benzobisoxazole) (PBO) nanocomposite. PBO and its nanocomposite fibers could be obtained by dry-jet wet spinning the as-polymerized solutions at a liquid crystalline state. No decrease in tensile strength of PBO/m-POSS nanocomposite fibers was observed with the m-POSS content. The tensile modulus of PBO nanocomposite fibers showed the increase 38 % at 2 % loading of POSS and 16 % at 2 % loading of m-POSS compared to PBO fiber. Incorporation of m-POSS into PBO brought to the increase of 19-54 % in compressive strength compared to PBO fiber. The retention of tensile strength was improved from 48 % for PBO to 59 % for PBO/POSS-2.0 mol% fiber and to 62 % for PBO/m-POSS-2.0 mol% fiber after 16 h UV irradiation.

Solid-state 17O NMR study of 2-acylbenzoic acids and warfarin

We report synthesis and solid-state 17O NMR characterization of four site-specifically 17O-labeled 2-acylbenzoic acids (2-RC(O)C6H4COOH) where R=H and CH3): 2-[3-17O]formylbenzoic acid, 2-[1,2-17O2]formylbenzoic acid, 2-[3-17O]acetylbenzoic acid, and 2-[1,2,3-17O3]acetylbenzoic acid. In the solid state, both 2-formyl- and 2-acetyl-benzoic acids exist as the cyclic phthalide form each containing a five-membered lactone ring and a cyclic hemiacetal/hemiketal group. Static and magic-angle-spinning 17O NMR spectra were recorded at 14.1 and 21.1T for these compounds, from which the 17O chemical shift and nuclear quadrupolar coupling tensors were determined for each oxygen site. These results represent the first time that 17O NMR tensors are fully characterized for lactone, cyclic hemiacetal, and cyclic hemiketal functional groups. We also report solid-state 17O NMR data for the cyclic hemiketal group an anticoagulant drug, warfarin. Experimental 17O NMR tensors in these compounds were compared with computational results obtained with a periodic DFT code BAND.

Synthesis of Enantioenriched Phthalide and Isoindolinone Derivatives from 2-Formylbenzoic Acid

Transformations of 2-formylbenzoic acid provide direct access to a series of heterocyclic organic compounds such as phthalides and isoindolinones. Here, we use (+)-cinchonine as a catalyst in conjunction with nonafluoro-<i>tert</i>-butanol as a hydrogen-bond donor to afford enantiomerically enriched acylated 3-hydroxyphthalides with up to 99% yield and 90% <i>ee</i> through dynamic kinetic resolution. Moreover, various 3-alkoxyphthalides as well as 2-alkyl-3-hydroxy-1-isoindolinones were synthesized from 2-formylbenzoic acid.

Synthesis of 4-alkylsulfanylphthalazin-1(2H)-ones via palladium catalyzed sulfanylation of substituted 4-bromophthalazin-1(2H)-ones

The synthesis of a series of new alkylsulfanyl phthalazinone and phthalazine derivatives is described. The target compounds were efficiently synthesized in a four step sequence, consisting of (1) cyclization of 2-formylbenzoic acid with hydrazine hydrate to form phthalazinone, (2) the direct bromination of phthalazinone core with KBr3, (3) alkylation of the obtained 4-bromolactam (Mitsunobu procedure) to make N- and also O-alkyl derivatives and finally (4) palladium-catalyzed coupling reactions of 2-alkyl-4-bromophthalazinone and 1-alkyloxy-4-bromophthalazine derivatives with aliphatic mercaptanes. Furthermore, the synthesis of 2-methyl-8-(propan-2-yl)sulfanyl-pyrido[3,4-d]pyridazin-1(2H)-one from 2-methyl-pyrido[3,4-d]pyridazin-1(2H)-one via bromination reaction with KBr3 and subsequent sulfanylation by isopropyl mercaptan under catalyzed coupling reaction conditions is also described.

One-pot synthesis of oxoisoindoline-1,2,3-triazole hybrid by a Ugi–click reaction

ABSTRACT1,2,3-Triazole-3-oxoisoindoline-1-carboxamide system was successfully synthesized by using a combination of Ugi and click reactions. This two-step, one-pot synthesis was started by the reaction of 2-formyl benzoic acid, propargyl amine, and cyclohexyl isocyanide in ethanol. The resultant Ugi adduct underwent a copper-catalyzed click reaction, producing the desired products in good yields.

A Catalyst-Free One-Pot Protocol for the Construction of Substituted Isoindolinones under Sustainable Conditions

An operationally simple, one-pot, catalyst-free method was developed for the synthesis of pharmaceutically important substituted isoindolinones by a three-component reaction of 2-formylbenzoic acid, a primary amine, and a 1,3-dione in ethanol under dielectric heating.

TiCl4-Mediated Preparation of Thiophthalide Derivatives via Formal Thio-Passerini Reactions.

By the formal extension of the Passerini reaction to thiocarbonyl derivatives, the straightforward preparation of thiophthalides is disclosed. This method involves the intermediate formation of a sulfanyl-phthalide and a titanium tetrachloride mediated isocyanide insertion reaction. When tert-butyl thiol is used, thanks to the deprotection of the tert-butyl group, a thiophthalide resulting from a 1,5-Mumm rearrangement is isolated. Owing to the multifaceted activity of TiCl4, all steps may conveniently be performed in one pot, starting directly from 2-formylbenzoic acids, tert-butyl thiol, and various isocyanides.

Synthesis, Antibacterial Activity, Interaction with Nucleobase and Molecular Docking Studies of 4-Formylbenzoic Acid Based Thiazoles.

Synthesis, characterization and investigation of antibacterial activity of ten novel Schiff base derivatives of 4-formylbenzoic acid is presented. Their structures were determined using 1H and 13CNMR, EI(+)-MS and elemental analyses. Additionally, DFT calculations of interaction energies in complexes of the novel drugs and DNA bases are carried out. Design and synthesis of thiazole derivatives with benzoic acid scaffold to obtain compounds with an improved antibacterial activity. The examined compounds were screened in vitro for antibacterial activity using the broth microdilution method. Geometrical parameters of the investigated complexes were optimized within the Density Functional Theory (DFT) approximation using the B3LYP functional and the 6-311G** basis set. The docking simulations were performed using the FlexX docking module. Among the derivatives, compound 4b showed very strong bacterial activity against staphylococci, MIC 1.95-3.91 µg/ml, micrococci, MIC 0.98 µg/ml, and Bacillus spp., MIC 7.81-15.62 µg/ml. The compounds 4c, 4d, 4e and 4j also showed high bioactivity against staphylococci, MIC 3.91-31.25 µg/ml, and micrococci, MIC 0.98-15.62 µg/ml. Interaction energy values for investigated guanine complexes are about 2 kcal/mol lower than for the corresponding cytosine complexes. Molecular docking studies of all compounds on the active sites of bacterial enzymes indicated gyrase B as possible target. To conclude, an efficient and economic method for the synthesis of thiazoles containing benzoic acid moiety has been developed. The results of antibacterial screenings reveal that some obtained compounds show high to very strong antibacterial activity. The DFT calculations showed that interaction of the obtained drugs with guanine is stronger than with cytosine. Molecular docking studies of all compounds on the active sites of bacterial enzymes indicated gyrase B as possible target.