3D Analysis Research Articles

Utilizing a Fully Digital Approach for Oral Squamous Cell Carcinoma Treatment and Zygomatic Implant-Based Rehabilitation for Maxillary Defects.

This clinical report details the functional and esthetic rehabilitation of a patient with a severe maxillary defect secondary to subtotal maxillectomy for oral squamous cell carcinoma using a maxillary prosthesis anchored by 4 zygomatic implants. The procedure involved meticulous subtotal maxillectomy and defect repair with zygomatic implant support, incorporating advanced digital surgical methods, including 3D reconstruction, computer-guided surgery, and photogrammetry (Icam4D). A 3D finite element analysis was conducted to assess the method's efficacy in analyzing stress distribution around the zygomatic implants. The patient expressed high satisfaction with the prosthesis's functionality, esthetics, speech, and swallowing capabilities, underscoring the value of zygomatic implant-supported maxillofacial prosthetics. This synergy of advanced planning, surgical precision, and biomechanical analysis marks a significant advancement in maxillofacial prosthetics.

3D morphometry of endothelial cells angiogenesis in an extracellular matrix composite hydrogel

Human umbilical vein endothelial cells (HUVECs) play a fundamental role in angiogenesis. Herein, we introduce digital holographic microscopy (DHM) for the 3D quantitative morphological analysis of HUVECs in extracellular matrix (ECM)-based biomaterials as an angiogenesis model. The combination of volumetric information from DHM and the physicochemical and cytobiocompatibility data provided by fluorescence microscopy and cytology offers a comprehensive understanding of the angiogenesis-related parameters of HUVECs within the ECM. DHM enables label-free, non-contact, and non-invasive 3D monitoring of living samples in real time, in a quantitative manner. In this study, the human amniotic membrane (HAM) is decellularized, pulverized, and combined with sodium alginate hydrogel to provide an in vitro substrate for modeling HUVEC angiogenesis. Our results demonstrate that modifying alginate hydrogel with HAM enhances its biofunctionality due to the presence of ECM components. Moreover, the DHM results reveal an increase in its porous properties, which, in turn, aids in interpreting the tubulation results.

Assessing Photo-Voltaic Potential in Urban Environments: A Comparative Study between Aerial Photogrammetry and LiDAR Technologies

Abstract. Urban development and population growth have significantly increased energy demands, predominantly met by non-renewable resources, negatively impacting nature and climate. Consequently, there has been a global shift towards renewable energy sources, with solar energy being widely adopted. Photovoltaic (PV) potential measures the usable electricity from solar energy using PV technology. With conventional methods, estimating PV potential involves converting 3D point cloud data to 2.5D elevation models, which can affect the accuracy of the estimation. A research gap exists in using adequate 3D point cloud datasets for PV potential estimation considering roof surface area and the surface normal vectors. This study compares aerial photogrammetry and aerial LiDAR point clouds for PV potential estimation against the DSM-based approach. Accurate PV potential estimation must consider solar incidence, roof area, azimuth, tilt angles, and PV efficiency. Traditional 2.5D methods often overlook crucial azimuth and tilt data, limiting the accuracy of the PV estimation. Converting 3D data to 2.5D may result in information loss, while 3D analyses offer higher accuracy. To investigate the mentioned gaps, this research aims to evaluate the capabilities of photogrammetry and LiDAR for urban PV potential estimation, highlighting their feasibility and accuracy over 2.5D methods.

3D Motion Analysis of Alpine Skiing on Steep Slope Gate in Men’s Giant Slalom

This study aimed to determine the characteristics of the elite skiers and the techniques required to improve their performance in the men’s giant slalom alpine skiing competition by conducting a three-dimensional (3D) motion analysis. The top nine skiers were compared with the next nine skiers using 3D motion analysis in a single-gate section with an average slope of 25.6°. The results revealed the following characteristics of superior skiing techniques. (1) The skiers started the turn from a high position relative to the gate and obtained high velocity by skiing in a gentle arc using potential energy. (2) By quickly rotating and edging the skis, the skiers were able to gain centripetal force early, enter the gate, ski in the direction of the fall line, and change skiing direction timely. (3) The skiers had quick inward leaning of the body and early lowering of the pelvis on the outside ski to form an angulation posture to resist the large external forces acting on the body during the turn.

Evaluation of the sagittal vertical axis with postural and 3D motion analyses in lumbar spinal stenosis

BackgroundSagittal balance, commonly impaired in lumbar spinal stenosis (LSS) patients, is typically assessed using the sagittal vertical axis (SVA) with EOS imaging. However, to limit X-ray exposure and medical costs, it could be interesting to evaluate the capacity of quantified motion analysis to estimate the 3D modeling of SVA in patients with symptomatic LSS.MethodsAn estimation of the SVA in patients with LSS was performed with 3D motion analysis. SVA and “C7_PSI” (orthogonal horizontal distance between the vertical lines through the markers of the C7 vertebra and the middle of the posterosuperior iliac spine) were measured on 37 LSS patients using EOS radiography and postural and 3D motion analysis, respectively. Multiple stepwise linear regressions were performed with EOS SVA according to age, body mass index, C7_PSI and/or postural variables.ResultsA highly significant relationship was found between SVA and C7_PSI, mediolateral amplitude of CoP displacements and age (adjusted R²=0.69, p < 0.0001). While the postural analysis did not reveal significant relationships, the model using 3D parameters revealed significant relationships between radiographic SVA and C7_PSI and age (adjusted R²=0.65, p < 0.0001). 3D motion parameters with or without postural parameters may explain more than 65% of the variance seen in EOS imaging performed on LSS patients.ConclusionsThese promising results in LSS patients suggest that the estimation of SVA with 3D motion analysis offers an alternative to EOS. In addition, SVA could be assessed at rest and during dynamic tasks.Trial registrationThis study has been published in Clinical Trial registration (reference NCT03194607).

Interpreting the edge angle efficiency of middle palaeolithic lithic assemblage with Artifact-3D – A case study Barwaniya W1, North Karanpura Valley, Eastern India

The lithic technology is directly linked with knapping skills, cognition, and economic production of a particular culture. The central objective of lithic production was to obtain desirable edge angles and sharpness for cutting/ butchering work in an efficient manner to achieve the highest utility/ efficiency and low production ratio. The angle of an edge, whether unaltered or retouched and as part of the overall tool design, is undoubtedly a parameter that influences the behavioural dimension of a lithic artefact. Thus, lithics artefacts' work efficiency or knapping efficiency depends on their working (cutting) edge angle, length of the parallel edge, centre of gravity, length of lithic, and lesser rate of edge angle damage. The present research has analysed the working edge angle of the Middle Palaeolithic Levallois assemblage from the newly discovered site of Barwaniya W1 from the North Karanpura Valley (North of Upper Damodar Basin), Jharkhand, India with the help of semi-automated 3D edge angle analysis technique. the current study scrutinises the entirety of an artefact's edge angle through automated positioning based on surface tension and a higher number of reference measurement points on the 3D scan surface of the artefact. This research has digitally measured the Middle Palaeolithic quartzite flake-based assemblage from Barwaniya W1 and their working edge angle, parallel edge (thick blunt side used for hafting), and centre of gravity with Artefact-3D software which has provided us with precise measurement without human errors and ambiguity. Further, this research has replicated the quartzite lithic assemblage of Barwaniya W1 with the Levallois reduction technique to interpret the edge angle efficiency.

TMG Symmetry and Kinematic Analysis of the Impact of Different Plyometric Programs on Female Athletes’ Lower-Body Muscles

Asymmetries in sports are common and can lead to various issues; however, different training programs can facilitate change. This study aimed to assess the effects of opposing plyometric programs on tensiomyography lateral symmetry (TMG LS)/inter-limb asymmetry in female athletes’ lower-body muscles, alongside kinematic and body composition parameters. Twenty female subjects from basketball, volleyball, and track and field (sprinting disciplines) were divided into two experimental groups (n = 10 each). Two six-week plyometric programs (two sessions/week) were implemented: the first program (E1) focused on eccentric exercises, depth landings, while the second (E2) emphasized concentric exercises, squat jumps. TMG assessed LS in six muscles: vastus lateralis, vastus medialis, biceps femoris, semitendinosus, gastrocnemius lateralis, and gastrocnemius medialis. A kinematic analysis of the countermovement jump (CMJ) and body composition was conducted using “Kinovea; Version 0.9.4” software and InBody 770, respectively. The results showed significant increases in LS percentages (E1—VL 9.9%, BF 18.0%, GM 10.6% and E2—BF 22.5%, p &lt; 0.05), and a significant large effect in E1 for VL, and in E2 for BF, p &lt; 0.01). They also showed that E1 had a significant effect on VL, and that E2 had a significant large effect on BF (p &lt; 0.01). E1 also led to increased lean muscle mass in both legs (left: 1.88%, right: 2.74%) and decreased BMIs (−0.4, p &lt; 0.05). Both programs improved LS, with E1 enhancing muscle mass and lower-body positioning in CMJ. We recommend future studies use varied jump tests, incorporate 3D kinematic analysis, include male subjects, and examine more muscles to enhance TMG LS analysis.

Prospects of productive strata of the pre-Jurassic complex of Western Siberia for the discovery and involvement in the development

The article discusses the prospects of productive strata of deposits of the pre-Jurassic complex of Western Siberia for searching, forecasting and involving in the development. Some features of the geological structure of Triassic volcanic-sedimentary deposits and formations of the Paleozoic basement have been identified within the pre-Jurassic complex. The construction of digital geological models of Triassic and Paleozoic formations, which are fundamentally different in the geometry of the internal structure of the hydrocarbon deposits discovered in them, is based on 3D seismic information and its interpretation. In deposits of Triassic and Paleozoic sediments, significant differences in the composition and filtration-capacitive properties of rock reservoirs have been recorded; the principles for creating the structural frameworks of their digital models are also different. 3D seismic data makes it possible to correlate the Triassic strata and identify individual cycles, the boundaries and geometry of which are used to create digital three-dimensional geological models. When creating models of hydrocarbon deposits in Paleozoic formations confined to basement high areas, based on the interpretation of 3D seismic survey materials and analysis of seismic attributes, in combination with information on core, petrophysics and well testing, a forecast is made for the development of areas and strata of increased fracturing of rocks, which are the main inflow strata in production wells. Using the example of individual developed deposits confined to the pre-Jurassic complex in the fields of Western Siberia, the actual results of integrating geological and geophysical information with 3D seismic data are shown. Based on these results not only an assessment of the geological reserves of hydrocarbons was carried out, but also hydrodynamic calculations were conducted to perform history matching, as well as recommendations were made for the locations for drilling wells, their geometry and test strata. The accumulated experience in exploration and development of productive deposits of the pre-Jurassic complex allows us to assess the geometry and features of objects of interest in this interval, select the most informative methods for their mapping and methods for creating digital geological models that are the basis for designing the development.

3D limit analysis of reinforced concrete with sliding along smeared cracks

Limit analysis (LA) is successfully used for investigating the bearing capacity of reinforced concrete (RC) structures. Some cautions must be taken when using this method for RC since the concrete component exhibits a softening behavior with decreasing strength and limited ductility. A commonly adopted provision consists of considering isotropic reduced values of concrete strength to be input in the analysis (empirical effectiveness factors). In this paper, an alternative and completely new approach is proposed and investigated in which concrete strength is weakened in a more targeted manner. To that purpose, the commonly used 3D truncated Mohr-Coulomb (TMC) criterion is adopted to classically describe the compressive, tensile, and shear failure of concrete. However, TMC is here in an original way enriched by additional constraints that allow to account for weakness and anisotropy induced by preferential failure patterns, assumed a priori. The limit analysis approach is then formulated for two dual analyses in the convex optimization framework, making it possible to quantify the numerical error and obtain a lower and an upper bound of the limit load. Numerical examples illustrate the agreement of the formulation with academic results and laboratory tests.

Physicochemical and Structural Validation of Myxovirus Resistance 1 (Mx1) Protein of Three Strains of the Nigerian Indigenous (&amp;lt;i&amp;gt;Gallus Gallus domesticus&amp;lt;/i&amp;gt;) and Exotic Chickens

This research was conducted on three strains of Nigerian Indigenous (&amp;lt;i&amp;gt;gallus gallus domesticus&amp;lt;/i&amp;gt;) and Noiler (exotic) chickens. It examined the physicochemical and structural validation of Myxovirus resistance 1 (Mx1) protein on the three strains of Nigerian indigenous (naked neck, frizzle feather, normal feather) and noiler (exotic) chickens and also the prediction of the Physicochemical Analysis of protein. Nucleotide sequence were retrieved from National Center for Bio-Technology Information (NCBI) database and subjected to multiple sequence alignment, prediction of the physicochemical analysis of protein was done in the ProtParam web server. Modeling of 3D structural validation, Swiss modeling and Statistical analysis were all carried out. Software was used to align the sequences to find any Single Nucleotide Polymorphism (SNPS). The result of physicochemical analysis showed that the properties of the Mx1 protein fell within accepted threshold and predicted that the proteins were generally related. To validate the structure obtained from modeling, the obtained PDB files were ran on the Pro-check validation server and obtained Errat and Ramachandran plots. The study elucidates the unique features and potential functional implications of Mx1 protein across different strains of Nigerian indigenous and exotic chickens. This knowledge can inform the development of strategies to improve disease resistance in local chicken populations through selective breeding or genetic manipulation. Comparing the Mx1 protein among different strains of Nigerian indigenous chickens can reveal evolutionary adaptations and provide valuable information for understanding the molecular basis of immune defense mechanisms in poultry. Understanding the physicochemical properties and structural dynamics of Mx1 protein contributes to the broader understanding of innate immune responses in indigenous chicken breeds, offering insights into their disease resistance and adaptation mechanisms.

Unsupervised Bushfire Burn Severity Mapping Using Aerial and Satellite Imagery

Abstract. It is critical to assess bushfire impact rapidly and accurately because bushfires play a significant role in forest degradation and present a threat to ecosystems and human lives. Over the past decades, several supervised algorithms of burn severity mapping have been proposed, facing the significant drawback of time-consuming labeling. Moreover, there is no robust framework for burn severity mapping through fusing multi-sensor, multi-resolution, and multi-temporal remote sensing imagery from satellite and aerial platforms. Therefore, this paper presents an unsupervised two-step pipeline: processing 2D data followed by 3D data for burn severity mapping, both of which are acquired from either aircraft or satellites. For the 2D data processing, our proposed unsupervised burned area detection (UsBA detection) model enhances burned area mapping accuracy by integrating Ultra-High Resolution (UHR) aerial imagery with bi-temporal medium-resolution PlanetScope imagery, using a Segment Anything Model (SAM)-assisted UNetFormer (pre-trained on the target-style public dataset – LoveDA Rural) for refinement. The model demonstrates superior burned area segmentation, evidenced by improved evaluation metrics calculated from labeled test sites. For the 3D analysis, the burned areas extracted from 2D processing are further assessed using pre- and post-event airborne laser data. We implement a voxel-based workflow, including necessary steps such as ground filtering through Superpoints in RANSAC Planes (SiRP) method and biomass change analysis. The results indicate that the 3D branch provides a reliable lower bound of the actual damage map, because the vegetation growth between two measurements remains, in essence, undetected. The proposed framework offers a more accurate and robust solution for burn severity mapping utilizing combined 2D and 3D data, evaluated on a multi-source dataset from a real bushfire event that occurred in Bushland Park, South Australia.

3D and 4D Technology for Pharmaceutical Drug Delivery: A Detailed Insight

3D Printing, sometimes referred to as additive manufacturing, has made the concept of personalized medicine a reality. The primary objective of 3D and 4D printing is to produce intricate, customized pharmaceuticals at a reasonable cost. With improvements in materials, resolution, and speed, 3D printing technology is quickly developing. It includes faster construction, cost efficiency through reduced waste, design flexibility for complex structures, and sustainability through optimized material usage. An extensive literature survey was done on 3D and 4D printing of pharmaceuticals using PubMed, Elsevier, ScienceDirect, and Springer. The results were then filtered based on the titles, abstracts, and accessibility of the complete texts. The search engine Google Scholar was accessed for literature data mining. From the data mining, it was found that from the year 2009 to 2024 the number of research publications surged more than 200 times on the current topic. Even though 3-D and 4-D printing technologies have advanced significantly in a short amount of time, the most often used ones are still stereolithography, nozzle-based deposition, inkjet, and selective laser sintering. Their use has been modified for the production of nanoparticles, polypills, tablets, and implants, etc. Pharma's aspirations for tailored medications are being revolutionized by 3D printing, but cost, flexibility, and bioequivalence still need to be investigated. The present review offers a thorough analysis of various 3D and 4D printing methods and emphasizes the major advantages and disadvantages and major key challenges of 3D and 4D printing related to pharmaceuticals. Compared to 3D Printing, 4D printing offers better quality, efficacy, and functionality.

Stress Distribution in Proclined Anterior Teeth of Pediatric Patients With and Without Mouthguard Use: A 3D Finite Element Analysis.

Traumatic dental injuries related to sports are a significant concern, as they can have severe physical and psychological impacts on children. Using mouthguards is essential, particularly in sports like skating, where high-impact forces are common. The study aimed to evaluate how stress is distributed on the teeth and surrounding bone in children with proclined anterior teeth when a force of 614.12 N was applied to two different regions of the jaws. The evaluation was conducted using finite element analysis (FEA), both with and without the use of a mouthguard. A 3-dimensional finite element analysis (FEA) model was constructed using a cone beam computed tomography (CBCT) scan of a 12-year-old male patient. An average standardized force of 614.12 N was calculated, based on the average weight of children aged 11 to 13 years and the average speed of 13.4 m/s with which the children skate. The force was applied in two different directions and areas of the jaws: a lateral blow, perpendicular to the crown and root with the maxillary and mandibular teeth in occlusion (between the first molar and second premolar), and a blow obliquely at the pogonion point on the chin. Static simulations were then performed for four realistic scenarios-two with mouthguards and two without mouthguards. The Von Mises stresses were evaluated under all conditions. When the applied force was directed laterally, the stress values observed were 126.76 MPa with a mouthguard and 140 MPa without a mouthguard. When the force was applied to the chin region, the stress values were 37.997 MPa with a mouthguard and 40.67 MPa without a mouthguard. The use of a mouthguard in children is beneficial for protecting teeth and surrounding structures, especially in cases of proclined anterior teeth, as it helps dampen the generated stresses.

Relationship between the flexion relaxation phenomenon and kinematics of the multi-segmental spine in nonspecific chronic low back pain patients

The flexion relaxation phenomenon (FRP) is characterized by the reduction of paraspinal muscle activity at maximum trunk flexion. FRP is reported to be altered (persistence of spinal muscle activity) in more than half of nonspecific chronic low back pain (NSCLBP) patients. Little is known about how the multi-segmental spine affects FRP. The aim of this observational study was to investigate the relationship between FRP and kinematic parameters of the multi-segmental spine in NSCLBP patients. Forty NSCLBP patients and thirty-five asymptomatic participants performed a standing maximal trunk flexion task. Surface electromyography was recorded along the erector spinae longissimus. The kinematics of the spine were assessed using a 3D motion analysis system. The investigated spinal segments were upper thoracic, lower thoracic, thoracolumbar, upper lumbar, lower lumbar, and lumbopelvic. Upper lumbar ROM, anterior sagittal inclination of the upper lumbar relative to the lower lumbar in the upright position, and ROM of the upper lumbar relative to the lower lumbar during full trunk flexion were significantly correlated with the flexion relaxation ratio (Rho 0.42 to 0.58, p < 0.006). The relative position and movement of the upper lumbar segment seem to play an important role in the presence or absence of FRP in NSCLBP patients.

AI-based 3D analysis of retinal vasculature associated with retinal diseases using OCT angiography.

Retinal vasculature is the only vascular system in the human body that can be observed in a non-invasive manner, with a phenotype associated with a wide range of ocular, cerebral, and cardiovascular diseases. OCT and OCT angiography (OCTA) provide powerful imaging methods to visualize the three-dimensional morphological and functional information of the retina. In this study, based on OCT and OCTA multimodal inputs, a multitask convolutional neural network model was built to realize 3D segmentation of retinal blood vessels and disease classification for different retinal diseases, overcoming the limitations of existing methods that can only perform 2D analysis of OCTA. Two hundred thirty sets of OCT and OCTA data from 109 patients, including 138,000 cross-sectional images in normal and diseased eyes (age-related macular degeneration, retinal vein occlusion, and central serous chorioretinopathy), were collected from four commercial OCT systems for model training, validation, and testing. Experimental results verified that the proposed method was able to achieve a DICE coefficient of 0.956 for 3D segmentation of blood vessels and an accuracy of 91.49% for disease classification, and further enabled us to evaluate the 3D reconstruction of retinal vessels, explore the interlayer connections of superficial and deep vasculatures, and reveal the 3D quantitative vessel characteristics in different retinal diseases.

Dynamic three-dimensional facial topography in pediatric facial palsy: Understanding asymmetrical facial contours

BackgroundObjective assessment of facial movements remains pivotal for diagnosis, treatment, and long-term monitoring of patients with facial palsy (FP). This study aims to utilize curvature analysis in pediatric patients with and without FP to define facial contours and to quantify three-dimensional (3D) excursion during smile. MethodsPediatric patients with and without FP had 3D motion capture acquired from rest to maximum smile positions. 3D curvature analysis was performed with a custom MATLAB algorithm. A 40-vertex “smile curve” along the nasolabial fold-cheek-orbit contour was extracted from each patient-specific 3D mesh hemiface. This allowed quantification of excursion and asymmetry for affected vs. unaffected sides in FP patients, and comparison with controls. ResultsTwelve FP (mean 12.5yr., range 5-18) and 12 control (mean 12.1yr., range 5-18) patients were analyzed. Differences in facial contour are intensified during animation, especially in the nasolabial fold, cheek, and periorbital regions of interest and the smile curve which links them. Mean excursion differed significantly between the FP and control groups in all regions of interest (p < 0.0001). ConclusionsCurvature analysis provides insight into the unexplored relationship of the 3D morphological dynamics of the concavity and convexity of the face, to add to the understanding of this complex condition. The magnitude of asymmetry between a FP patient’s affected vs. unaffected smile curve excursion, and comparison to the control group, could allow surgical treatment to be tailored to an individual patient’s dynamic anatomy by identifying and quantifying facial region-specific asymmetry.

A Perspective on the Process and Turbomachinery Design of Compressed Air Energy Storage Systems

Abstract The present paper will describe the Baker Hughes experience in the development of the turbomachinery equipment for Hydrostor's advanced compressed air energy storage (A-CAES) system. At the core of a compressed air energy storage (CAES) plant, there is an air compressing system, followed by an air expander used to recover the stored energy. To achieve a reliable and effective solution, the expander is obtained from the architecture of Baker Hughes steam turbines, which was adapted to match the specific process needs. The criticalities that were addressed and solved to derive the expanders from the original steam turbine are presented. Specifically, the paper describes the activities performed to optimize the inlet and exhaust sections of each segment, the development of the blades for high atmospheric volume flow, and the implications that thermal transients have on the machine reliability. The inlet and exhaust sections were arranged according to the layout constraints, which were set to mitigate the effects of the thermal stresses and to reduce the weight to facilitate the machine transportation, while maintaining high aero-performance. As for the expander, a single-body configuration was selected to optimize capital expenditures and reduce leakage to atmosphere. A new set of blades derived from Baker Hughes's Steam Turbine stages were developed. This new stage is characterized by rotating blades with high radius ratio (HRR); therefore, an optimization strategy was adopted to include the mechanical constraints from the beginning of the design cycle and obtain a final geometry that can be used with different flow path and operating conditions. Finally, the three-dimensional full Navier Stokes Computational fluid dynamics analysis was used to assess the performance of the new stages in nominal and off-design conditions. A detailed analysis of the thermal transient of the expander parts with finite element analysis methods was performed to assess the life expectations of the equipment. The finite element analysis results are discussed in the paper to show the capability of the machine to sustain an extremely fast start up sequence. Compressor train is characterized by a multiple body configuration. A detailed optimization was performed to improve the efficiency and the availability of the selected solution. The low-pressure axial compressor discharge section has been optimized to reduce losses and a detailed study of rotor has been performed to evaluate the capability to withstand a high number of start and stop cycles.

Experimental and numerical investigation on RC beams with web openings subjected to pure torsion strengthened by ferrocement technique or GFRP sheets

The main objective of the current experimental and numerical study is to investigate the effect of strengthening by ferrocement layers on the behavior of reinforced concrete (RC) beams with openings subjected to pure torsion and compare it with the beams that were strengthened by Glass Fiber Reinforced Polymer (GFRP). The experimental investigation consists of twelve reinforced concrete (RC) beams that have been divided into four groups. The parameters under investigation included the strengthening technique (ferrocement or External Bonded Glass Fiber Reinforced Polymer EB-GFRP), type of steel mesh (welded wire mesh and expanded metal mesh), number of layers of mesh (1, 2, 3), extension length outside opening (50, 100 or 200) mm, strengthening configuration (full or U-shape) wrapping, and the anchoring system effect. The experimental work consists of one solid beam and eleven beams with openings. The tested beams yielded results such as cracking and ultimate torques, angle of rotation, and mechanism of failure. Creating an opening in the control solid beam resulted in a 38.46 % decrease in ultimate torque, while using different techniques during this research proved efficiency in the strengthening process. Using GFRP U-wrapping and fully wrapping to strengthen the area around the beam's opening increased the ultimate torque by 50 % and 81.25 %, respectively, compared to the un-strengthened beam with an opening. Adding fully wrapped ferrocement layers to the beam with an opening greatly improved its torsional strength. The ultimate torque increased by 40.63 % to 81.25 % compared to the beam with an unreinforced opening. Increasing the number of welded steel mesh layers from 1 to 3 in the ferrocement strengthening technique led to an increase in ultimate torque from 40.63 % to 75 % compared with the un-strengthened beam with the opening. The tests showed that using expanded metal mesh instead of welded wire mesh in strengthened beams with holes led to a 9.43 % higher ultimate torsional capacity, indicating that the expanded metal mesh worked better than the welded wire mesh. Using the U-shape ferrocement wrapping with anchors was better than without anchors, resulting in a 9.1 % increase in the ultimate torsional capacity. Applying a fully wrapped GFRP sheet or expanded metal mesh ferrocement strengthening achieved the highest ultimate torque, 81.25 % more than the un-strengthened beam with an opening. Moreover, a 3D non-linear finite element analysis is conducted using ABAQUS software to forecast the torsional properties of beams strengthened by either ferrocement or EB-GFRP. The numerical model captured the failure patterns, twisting angle, and ultimate load of tested beams. The experimental and analytical results were in good agreement. The research concluded the effectiveness of using the ferrocement reinforced with different steel mesh types in strengthening reinforced concrete beams with openings under pure torsion, the cost-efficiency and simplicity of ferrocement as a solution compared to its results with EB-GFRP techniques.

Synthesis, C-N/N-N bond conformational analysis and evaluation of naphtho[2,3-d][1,2,3]triazole-4,9-dione tethered N-acyl hydrazones as α-amylase inhibitors: Insights from molecular modeling and ADMET analysis

In an effort to expand the repertoire of potent α-amylase inhibitors, we sought to develop novel inhibitors by combining 1,4-naphthoquinone, 1,2,3-triazole, and N-acyl hydrazone scaffolds in a single matrix. To achieve this, twelve novel naphtho[2,3-d][1,2,3]triazole-4,9‑dione tethered N-acyl hydrazones were synthesized through condensation reaction of 2-(4,9-dioxo-4,9-dihydro-1H-naphtho[2,3-d][1,2,3]triazol-1-yl)acetohydrazide with various substituted aryl aldehydes. Structural elucidation for all the compounds was performed using 1D, 2D-NMR, FTIR, and mass spectral analyses. The synthesized molecules were evaluated for their ability to inhibit α-amylase activity using acarbose as the standard drug. All the derivatives exhibited potent inhibition of α-amylase, with IC50 values ranging between 17.26 ± 0.07 to 25.62 ± 0.03 μg/mL. Notably, compound 9c possessing –meta substituted –NO2 group displayed the highest activity (IC50 = 17.26 ± 0.07 μg/mL) among the series. Structure-activity relationship (SAR) revealed the pivotal role of aryl ring substitutions in determining inhibitory efficacy. To validate these findings and to assess the binding stability of 9c within the catalytic site α-amylase dervied for A. oryzae (PDB ID:7TAA), in silico studies were performed. The compound 9c effectively occupies the enzyme's active pocket, with minimal RMSD fluctuations observed over 100 ns simulation, indicating stable protein-ligand complex. ADMET predictions suggested favorable drug-like properties, underscoring the potential of these compounds as novel α-amylase inhibitors for managing type 2 diabetes mellitus

Mechanical and In Vitro Analysis of 3D Printed Silk Fibroin/Bone/Polycaprolactone/Chitosan Composite Scaffolds

Mechanical and In Vitro Analysis of 3D Printed Silk Fibroin/Bone/Polycaprolactone/Chitosan Composite Scaffolds