13C Cross-polarization Research Articles

Chemical Bonds Formed in Solid Wood by Reaction with Maleic Anhydride and Sodium Hypophosphite

The reaction of wood with maleic anhydride (MA) and sodium hypophosphite (SHP) has been identified as a viable modification method, with macroscopical properties indicating formation of cross-linking to explain the results. However, the chemical reaction between wood and the modification reagents has not been studied yet. To resolve this, the reaction was studied with solid-state 13C cross-polarization magic-angle-spinning (CP-MAS) and 31P MAS nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) to reveal the formation of bonds between wood components, MA and SHP during the treatments to explain the formation of cross-linking and the possible fixation of phosphorus in wood. XPS, solid state 13C and 31P MAS NMR revealed the maleation of wood in the absence of SHP, whilst its presence led to forming a succinic adduct observed through the C-P bond formation, as evidenced by the loss of the maleate C=C bonds at around 130 ppm and the upfield shift of the peak at 165–175 ppm, which was also significantly smoothed, as well as the increase in a peak at 26 ppm due to the reaction between the maleate group and SHP; however, the C-P-C bond could not be unambiguously rationalized from the obtained data. On the other hand, a resonance line at 16 ppm in 31P MAS NMR and the peaks in the XPS P 2p spectrum suggested the formation of a cross-linked structure at low concentrations of SHP, which was more likely to be phosphonate (C-P-O) than organophosphinic acid (C-P-C). The results herein provide a greater fundamental understanding of the mechanisms involved in the reaction of wood, MA and SHP, providing further scope for improved treatment systems in the future.

Initial Litter Chemistry and UV Radiation Drive Chemical Divergence in Litter during Decomposition.

Litter's chemical complexity influences carbon (C) cycling during its decomposition. However, the chemical and microbial mechanisms underlying the divergence or convergence of chemical complexity under UV radiation remain poorly understood. Here, we conducted a 397-day field experiment using 13C cross-polarization magic-angle spinning nuclear magnetic resonance (13C-CPMAS NMR) to investigate the interactions among the initial chemistry, microbial communities, and UV radiation during decomposition. Our study found that the initial concentrations of O-substituted aromatic C, di-O-alkyl C, and O-alkyl C in Deschampsia caespitosa were higher than those in Kobresia tibetica. Litter's chemical composition exhibited divergent patterns based on the initial chemistry, UV radiation, and decay time. Specifically, D. caespitosa consistently displayed higher concentrations of di-O-alkyl C and O-alkyl C compared to K. tibetica, regardless of the UV exposure and decay time. Additionally, litter's chemical complexity was positively correlated with changes in the extracellular enzyme activities, particularly those involved in lignin, cellulose, and hemicellulose degradation, which accounted for 9%, 20%, and 4% of the variation in litter's chemical complexity, respectively. These findings highlighted the role of distinct microbial communities in decomposing different C components through catabolism, leading to chemical divergence in litter. During the early decomposition stages, oligotrophic Planctomycetes and Acidobacteria metabolized O-alkyl C and di-O-alkyl C under UV-blocking conditions. In contrast, copiotrophic Actinobacteria and Chytridiomycota utilized these components under UV radiation exposure, reflecting their ability to thrive under UV stress conditions due to their rapid growth strategies in environments rich in labile C. Our study revealed that the inherent differences in the initial O-alkyl C and di-O-alkyl C contributed to the chemical divergence, while UV radiation further influenced this divergence by shifting the microbial community composition from oligotrophic to copiotrophic species. Thus, differences in the initial litter chemistry, microbial community, and UV radiation affected the quantity and quality of plant-derived C during decomposition.

Phosphorylated and carbamylated Kraft lignin for improving fire- and biological-resistance of Scots pine wood

In this study, Kraft lignin was modified by ammonium dihydrogen phosphate (ADP) and urea for achieving phosphorylation and carbamylation, aiming to protect wood against biological and fire attack. Scots pine (Pinus sylvestris L.) sapwood was impregnated with a water solution containing Kraft lignin, ADP, and urea, followed by heat treatment at 150 °C, resulting in changes in the properties of the Kraft lignin as well as the wood matrix. Infrared spectroscopy, 13C cross-polarisation magic-angle-spinning (MAS) nuclear magnetic resonance (NMR), and direct excitation single-pulse 31P MAS NMR analyses suggested the grafting reaction of phosphate and carbamylate groups onto the hydroxyl groups of Kraft lignin. Scanning electron microscopy with energy dispersive X-ray spectroscopy indicated that the condensed Kraft lignin filled the lumen as well as partially penetrating the wood cell wall. The modified Kraft lignin imparted fire-retardancy and increased char residue to the wood at elevated temperature, as confirmed by limiting oxygen index, microscale combustion calorimetry, and thermogravimetric analysis. The modified wood exhibited superior resistance against mold and decay fungi attack under laboratory conditions. The modified wood had a similar modulus of elasticity to the unmodified wood, while experiencing a reduction in the modulus of rupture.

Solid-State NMR Characterization of Mefloquine Resinate Complexes Designed for Taste-Masking Pediatric Formulations.

Mefloquine (MQ) is an antimalarial medication prescribed to treat or malaria prevention.. When taken by children, vomiting usually occurs, and new doses of medication frequently need to be taken. So, developing pediatric medicines using taste-masked antimalarial drug complexes is mandatory for the success of mefloquine administration. The hypothesis that binding mefloquine to an ion-exchange resin (R) could circumvent the drug's bitter taste problem was proposed, and solid-state 13C cross-polarization magic angle spinning (CPMAS) NMR was able to follow MQ-R mixtures through chemical shift and relaxation measurements. The nature of MQ-R complex formation could then be determined. Impedimetric electronic tongue equipment also verified the resinate taste-masking efficiency in vitro. Variations in chemical shifts and structure dynamics measured by proton relaxation properties (e.g., T1ρH) were used as probes to follow the extension of mixing and specific interactions that would be present in MQ-R. A significant decrease in T1ρH values was observed for MQ carbons in MQ-R complexes, compared to the ones in MQ (from 100-200 ms in MQ to 20-50 ms in an MQ-R complex). The results evidenced that the cationic resin interacts strongly with mefloquine molecules in the formulation of a 1:1 ratio complex. Thus, 13C CPMAS NMR allowed the confirmation of the presence of a binding between mefloquine and polacrilin in the MQ-R formulation studied.

Probing structural features in potato starch granules at moderate hydration through the modelling of 1H->13C polarization transfer kinetics

The structural arrangement of starch polymers in presence of water is known to impact the functional properties of starchy products. In this study, the hydration of potato starch granules was investigated at the molecular level through various 1H->13C polarization transfer solid-state Nuclear Magnetic Resonance (ss-NMR) experiments. The impact of increasing the water content from 12.3 % to 45.9 % was assessed using 13C Cross Polarization Magic Angle Spinning (CPMAS), Variable Contact Time (VCT-CPMAS), Variable Spin Lock (VSL-CPMAS), and T One Rho QUEnching (TORQUE) NMR sequences. Of these, VCT-CPMAS proved to be the most promising. When applied with an optimal number of contact times, it enabled the application of several mathematical models that provided detailed insights into the structuring of protons in the hydrated potato starch granules. At low hydration (12.3 %), the models enabled various structural domains to be distinguished, which we suggest are associated with helical and amorphous structures. At moderate hydration (45.9 %), we tested two fitting models. Two pools of protons were revealed, corresponding to loosely ordered structures on the scale of tens of nanometers. These findings suggest varying water distribution during starch hydration and are likely to indicate variable hydration levels in the multilamellar amorphous structures of starch granules.

Biradicals based on PROXYL containing building blocks for efficient dynamic nuclear polarization in biotolerant media

A versatile strategy for synthesizing tailored peptide based biradicals is presented. By labeling the protected amino acid hydroxyproline with PROXYL via the OH functionality and using this building block in solid phase peptide synthesis (SPPS), the obtained peptides become polarization agents for DNP enhanced solid-state NMR in biotolerant media. To analyze the effect of the radical position on the enhancement factor, three different biradicals are synthesized. The PROXYL spin-label is inserted in a collagen inspired artificial peptide sequence by binding through the OH group of the hydroxyproline moieties at specific position in the chain. This labeling strategy is universally applicable for any hydroxyproline position in a peptide sequence since solid-phase peptide synthesis is used to insert the building block. High performance liquid chromatography (HPLC) and mass spectrometry (MS) analyses show the successful introduction of the spin label in the peptide chain and electron paramagnetic resonance (EPR) spectroscopy confirms its activity. Dynamic nuclear polarization (DNP) enhanced solid-state nuclear magnetic resonance (NMR) experiments performed on frozen aqueous glycerol-d8 solutions containing these peptide radicals show significantly higher enhancement factors of up to 45 in 1H→13C cross polarization magic angle spinning (CP MAS) experiments compared to an analogous mono-radical peptide including this building block (ε ≈ 14). Compared to commercial biradicals such as AMUPol for which enhancement factors > 100 have been obtained in the past and which have been optimized in their structure, the obtained enhancement up to 45 for our biradicals presents a significant progress in radical design.

Sustainable Composite Materials Based on Carnauba Wax and Montmorillonite Nanoclay for Energy Storage.

Sustainable composite materials, including carnauba wax, can store energy in the form of latent heat, and containing the wax may allow form-stable melting and crystallization cycles to be performed. Here, it is shown that carnauba wax in the molten state and the abundant nanoclay montmorillonite form stable composites with mass ratios of 50-70% (w/w). Transmission electron microscopy analysis reveals the inhomogeneous distribution of the nanoclay in the wax matrix. Analyses with infrared and multinuclear solid-state nuclear magnetic resonance (NMR) spectroscopy prove the chemical inertness of the composite materials during preparation. No new phases are formed according to studies with powder X-ray diffraction. The addition of the nanoclay increases the thermal conductivity and prevents the leakage of the phase change material, as well as reducing the time intervals of the cycle of accumulation and the return of heat. The latent heat increases in the row 69.5 ± 3.7 J/g, 95.0 ± 2.5 J/g, and 107.9 ± 1.7 J/g for the composite materials containing resp. 50%, 60% and 70% carnauba wax. Analysis of temperature-dependent 13C cross-polarization solid-state NMR spectra reveal the enhanced amorphization and altered molecular dynamics of the carnauba wax constituents in the composite materials. The amorphization also defines changes in the thermal transport mechanism in the composites compared to pure wax at elevated temperatures.

Carbon-detected deuterium solid-state NMR rotating frame relaxation measurements for protein methyl groups under magic angle spinning

Deuterium rotating frame solid-state NMR relaxation measurements (2H R1ρ) are important tools in quantitative studies of molecular dynamics. We demonstrate how 2H to 13C cross-polarization (CP) approaches under 10–40 kHz magic angle spinning rates can be combined with the 2H R1ρ blocks to allow for extension of deuterium rotating frame relaxation studies to methyl groups in biomolecules. This extension permits detection on the 13C nuclei and, hence, for the achievement of site-specific resolution. The measurements are demonstrated using a nine-residue low complexity peptide with the sequence GGKGMGFGL, in which a single selective −13CD3 label is placed at the methionine residue. Carbon-detected measurements are compared with the deuterium direct-detection results, which allows for fine-tuning of experimental approaches. In particular, we show how the adiabatic respiration CP scheme and the double adiabatic sweep on the 2H and 13C channels can be combined with the 2H R1ρ relaxation rates measurement. Off-resonance 2H R1ρ measurements are investigated in addition to the on-resonance condition, as they extent the range of effective spin-locking field.

The hidden depths of forest soil organic carbon chemistry in a pumice soil

Forest ecosystems can store massive amounts of organic carbon (OC) deep in their soils. Soil OC (SOC) is composed of several complex organic compounds of which groupings of these organic compounds can provide an insight into evaluating the formation and fate of SOC. However, there is little information available regarding the chemical composition of deep forest SOC and how they compare to upper soil depths. The objective of this study was to explore the SOC chemistry changes with increasing soil depth on a fine spatial scale in a planted forest soil derived from young volcanic erupted airfall deposits. Soil core samples to 1 m depth were collected from Puruki Experimental Forest (New Zealand) and examined for incremental depth changes in SOC functional groups, or chemical shift regions, using solid-state 13C cross polarisation magic angle spinning nuclear magnetic resonance (13C CPMAS-NMR) spectroscopy. The results showed that soil depth was a driver of change in soil chemical shift regions. The presence of a coarse-textured soil horizon, lapilli layer, at depth was a driver of significant (p < 0.05) differences between SOC functional groups. In the upper soil profile (0–10 cm), the chemical shift distribution was dominated by O-alkyl C (39%) followed by alkyl C (32%), aromatic C (23%), and carboxyl C (6%). In the deep soil layers, we found alkyl C increased below the lapilli layer (varying depth > 50 cm) compared to above the lapilli layer. In the deep soil layers the alkyl C was the dominant functional group (55%), followed by O-alkyl C (28%). Furthermore, there was a decrease at depth in aromatic (12%) and carboxyl C (5%). The A/O-A ratio increased with depth from soil above the lapilli layer compared to soils below the lapilli layer indicating a greater degree of organic matter decomposition and a corresponding decrease in the labile OC fractions. Within the lapilli layer the SOC functional groups and A/O-A ratio were highly variable. These results highlight that changes in SOC chemical composition occur with increasing soil depth, a property of deep soil that is frequently understudied, and are highly influenced by the multi layered nature of soil derived from volcanic airfall deposits.

Characterisation of formulated high-density poly(ethylene) by magic angle spinning nuclear magnetic resonance.

High-density poly(ethylene) (HDPE) is an important class of polymer used extensively in plastic packaging as well as numerous other applications. HDPE has a structure that consists of crystalline (monoclinic and orthorhombic) and amorphous domains. Here, we exploit a range of approaches focusing on magic angle spinning (MAS) nuclear magnetic resonance (NMR) aimed at comparing the effect of the HDPE sample formulation (cutting, shaving and cryomilling), from the commercially available manufactured pellets, into these domains and their quantification. 13C cross polarisation (CP) experiments reveal that these formulated HDPEs are qualitatively different and 13C CP build-up curves and 13C direct excitation experiments enable the content of each domain to be obtained, pointing to an increase of monoclinic domain at the expense of the orthorhombic one upon increased processing. The crystallinity contents obtained compared, in some cases, favourably with those obtained by differential scanning calorimetry (DSC) data. These results provide evidence that the manner of preparation of HDPE pellets modifies the concentration of the various domains and suggest that care should be taken during processing.

Environmentally friendly strength bio-composite preparation by grafting of HEMA onto shrimp chitosan without destroying original microstructure to enrich their physicochemical, thermomechanical, and morphological properties

Shrimp shell is the most significant chitin source among bio-based materials since a huge quantity of crustacean wastes has been expelled out as a waste material from various shrimp processing industries/zones. The carapaces were treated by 2 M HCl for demineralization (DM), 2 N NaOH for deproteinization (DP), and 50 % NaOH for deacetylation (DA) to extract chitosan, without destroying the inherent microstructure of native shells. Then grafting was carried out by 2‑hydroxy ethyl methacrylate (HEMA) by using a redox initiator K2S2O8/FeSO4 to produce environmentally friendly strength bio-composite. Meanwhile, maximum yield was found when the concentration of monomer and initiator were 2.55 × 10−1 mol/L, 8.48 × 10−3 mol/L, at 70°C whereas the value has been recorded around 73.33±0.03 %. Besides the honeycomb microstructure of chitosan could enhance the overall properties of the fabricated biocomposites by using mechanical interlocking mechanism during compounding. The samples were characterized by fourier transform infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), solid-state 13C cross-polarization magic-angle-spinning nuclear magnetic resonance (CPMAS-NMR) and tensile strength (TS) techniques. The microstructure and thermo-mechanical profile exhibited noteworthy changes on the bulk property of the CS-g-HEMA composites. Result suggested that the shrimp waste shell would be an attractive source of strength bio-composites that retains outstanding physicochemical, thermomechanical, morphological properties. Thus the grafted products would be significantly utilized in various engineering, and bulk scale industrial applications as a suitable replacement of fossil based synthetic ones for the sustainable environmental protection.

Ionic salt cocrystals studied via multinuclear solid-state magnetic resonance: a case study of lithium 4-methoxybenzoate:L-proline polymorphs

Lithium salts continue to find pharmaceutical applications, particularly as psychiatric medications. As with any active pharmaceutical ingredient, structural polymorphism is an important concern for lithium-based medications that can influence solubility and other physicochemical properties. Here we report a 13C, 1H, and 7Li magic-angle spinning solid-state nuclear magnetic resonance (MAS SSNMR) study of two 1:1 polymorphic ionic cocrystals of lithium 4-methoxybenzoate and L-proline (L4MPRO(α) and L4MPRO(β)). One-dimensional 13C cross-polarization MAS and two-dimensional heteronuclear correlation NMR spectra hint at differential mobilities of the proline and benzoate moieties for the two polymorphs. Five key resonances differ in 13C chemical shift by more than 1 ppm between the two polymorphs, clearly distinguishing between them. Gauge-including projector-augmented-wave density functional theory calculations of 13C and 1H magnetic shielding constants correlate strongly with the experimental chemical shifts for both polymorphs. R2 and root-mean-square deviation metrics are shown to be insufficient in the case of 13C, but sufficient in the case of 1H, for differentiating between the polymorphs. 7Li satellite-transition MAS NMR of both polymorphs are identical, as are the computed lithium magnetic shielding constants, demonstrating the insensitivity of 7Li NMR to polymorphism in these samples. This work highlights the utility of solid-state NMR spectroscopy for examining ionic salt cocrystals and also highlights some caveats in this regard.

Effects of dual modification by cationization and acetylation on the physicochemical and structural characteristics of glutinous rice starch

In this research, the effects of cationization, acetylation and dual modification by cationization and acetylation on the physicochemical and structural characteristics of glutinous rice starches were investigated. The rapid viscosity analyzer revealed a substantial increased paste viscosity post modification. Particularly, for dually modified starch, the peak viscosity increased from 3071.67 to 4082.00 cP. The freeze-thaw stability substantially enhanced, with both single cationic and dually-modified starches standing out by exhibiting no water syneresis even at 21 freeze-thaw cycles, while native starch exhibited higher syneresis, up to 74.55 %. Both single cationization and cationization-acetylation destroyed the starch granules, characterized by the roughness and cracks. But, for single acetylation, there was no notable changes on granules' morphology. Fourier transform infrared spectroscopy exhibited notable shifts after modification, both acetylation and dual modification, resulting in a new peak at 1728 cm−1. 13C cross-polarization magic angle spinning nuclear magnetic resonance spectra displayed new peaks at 52–55 and 19–22 ppm following cationization and acetylation, respectively. These structural alterations indicate the successful incorporation of functional groups during modification. Overall, this study provides valuable insights for the industrial utilization of these three modified glutinous rice starches.

Reticular Synthesis of Highly Crystalline Three-Dimensional Mesoporous Covalent-Organic Frameworks for Lipase Inclusion.

The synthesis and application of three-dimensional (3D) mesoporous covalent-organic frameworks (COFs) are still to be developed. Herein, two mesoporous 3D COFs with an stp topology were synthesized in a highly crystalline form with aniline as the modulator. The chemical composition of these COFs was confirmed by Fourier transform infrared (FT-IR) and 13C cross-polarization magic angle spinning nuclear magnetic resonance (NMR) spectroscopies. These 3D mesoporous COFs were highly crystalline and exhibited permanent porosity and good chemical stability in both aqueous and organic media. The space group and unit cell parameters of COF HFPTP-TAE were verified by powder X-ray diffraction (PXRD), small-angle X-ray scattering, and three-dimensional electron diffraction (3D ED). The appropriate pore size of the COF HFPTP-TAE facilitated the inclusion of enzyme lipase PS with a loading amount of 0.28 g g-1. The lipase⊂HFPTP-TAE (⊂ refers to "include in") composite exhibited high catalytic activity, good thermal stability, and a wide range of solvent tolerance. Specifically, it could catalyze the alcoholysis of aspirin methyl ester (AME) with high catalytic efficiency. Oriented one-dimensional (1D) channel mesopores in HFPTP-TAE accommodated lipase, meanwhile preventing them from aggregation, while windows on the wall of the 1D channel favored molecular diffusion; thus, this COF-enzyme design outperformed its amorphous isomer, two-dimensional (2D) mesoporous COF, 3D mesoporous COF with limited crystallinity, and mesoporous silica as an enzyme host.

NMR spectroscopy-based analysis of gallstones of cancerous and benign gallbladders from different geographical regions of the Indian subcontinent.

Analysis of the chemical composition of gallstones is vital for the etiopathogenesis of gallstone diseases that can ultimately help in the prevention of its formation. In the present study, gallstones from seven different regions of India were analyzed to highlight the major difference in their composition. Also, gallstones of different pathological conditions i.e., benign (chronic cholecystitis, CC) and malignant gallbladder disease (gallbladder cancer GBC) were characterized. The type of polymorphs of cholesterol molecules was also studied to provide insight into the structure of gallstones. 1H solution state NMR spectroscopy 1D experiments were performed on a total of 94 gallstone (GS) samples collected from seven different geographical regions of India. Solid-State NMR spectroscopy 13C cross-polarization magic angle spinning (CPMAS) experiments were done on the 20 CC GS samples and 20 GBC GS samples of two regions. 1H NMR spectra from the solution state NMR of all the stones reveal that cholesterol was a major component of the maximum stones of the north India region while in south Indian regions, GS had very less cholesterol. 13C CPMAS experiments reveal that the quantity of cholesterol was significantly more in the GS of CC in the Lucknow region compared with GBC stones of Lucknow and Chandigarh. Our study also revealed that GS of the Lucknow region of both malignant and benign gallbladder diseases belong to the monohydrate crystalline form of cholesterol while GS of Chandigarh region of both malignant and benign gallbladder diseases exists in both monohydrate crystalline form with the amorphous type and anhydrous form. Gallstones have a complicated and poorly understood etiology. Therefore, it is important to understand the composition of gallstones, which can be found in various forms and clinical conditions. Variations in dietary practices, environmental conditions, and genetic factors may influence and contribute to the formation of GS. Prevention of gallstone formation may help in decreasing the cases of gallbladder cancer.

Molecular composition and possible transformations of labile soil organic matter fractions in Mediterranean arable soils: Relevance and implications

With the increased global interest in sequestering carbon in soil, it is necessary to understand the composition of different pools of soil organic matter (SOM) that cycle over suitably short timeframes. To explore in detail the chemical composition of agroecologically relevant yet distinct fractions of SOM, the light fraction of SOM (LFOM), the 53-μm particulate organic matter (POM), and the mobile humic acid (MHA) fractions were sequentially extracted from agricultural soils and characterized using both 13C cross polarization magic angle spinning nuclear magnetic resonance (CPMAS NMR) spectroscopy and also Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). The NMR results showed a decrease in the O-alkyl C region assigned to carbohydrates (51–110 ppm) and an increase in the aromatic region (111–161 ppm) proceeding from the LFOM to the POM and then to the MHA fraction. Similarly, based on the thousands of molecular formulae assigned to the peaks detected by FT-ICR-MS, condensed hydrocarbons were dominant only in the MHA, while aliphatic formulae were abundant in the POM and LFOM fractions. The molecular formulae of the LFOM and POM were mainly grouped in the high H/C lipid-like and aliphatic space, whereas a portion of the MHA compounds showed an extremely high (17–33, average of 25) double bond equivalent (DBE) values, corresponding to low H/C values of 0.3–0.6, representative of condensed hydrocarbons. The labile components appeared most pronounced in the POM (93% of formulae have H/C ≥ 1.5) similar to the LFOM (89% of formulae have H/C ≥ 1.5) but in contrast to the MHA (74% of formulae have H/C ≥ 1.5). The presence of both labile and recalcitrant components in the MHA fraction suggests that the stability and persistence of soil organic matter is influenced by a complex interaction of physical, chemical, and biological factors in soil. Understanding the composition and distribution of different SOM fractions can provide valuable insights into the processes that govern carbon cycling in soils, which can help inform strategies for sustainable land management and climate change mitigation.

Variable-temperature solid-state NMR analysis of woody materials in the presence of small hydroxyl molecules

Interactions between the hierarchical structure of Japanese cypress and small hydroxylic solvents with high polarity were studied using variable-temperature 13C cross-polarization and magic-angle spinning nuclear magnetic resonance (CP/MAS) NMR spectroscopy, including low-temperature measurements. 13C CP/MAS NMR spectra were enhanced by dipolar interactions closely related to 1H–13C magnetization transfer, providing information about the interaction between woody materials and small hydroxyl molecules. The change in interaction was particularly near the melting point of the hydroxylic solvent, where a decrease in the intensity of the cypress carbohydrate signal and the appearance of the signal of solvent molecules were observed. The trend of signal intensity in the variable-temperature 13C CP/MAS NMR spectra of cypress and cellulose fibers in the presence of hydroxylic solvents indicated that the decrease in the carbohydrate signal intensity due to the transfer of magnetization near the melting point of the hydroxyl molecule is greater when the size of the hydroxyl molecule is smaller. Furthermore, molecular association in the nanopores of the hierarchical structure allowed the hydroxyl molecular signals of the impregnated cypress to appear above the melting point.

In Situ Multinuclear Magic-Angle Spinning NMR: Monitoring Crystallization of Molecular Sieve AlPO4-11 in Real Time.

Molecular sieves are crystalline three-dimensional frameworks with well-defined channels and cavities. They have been widely used in industry for many applications such as gas separation/purification, ion exchange, and catalysis. Obviously, understanding the formation mechanisms is fundamentally important. High-resolution solid-state NMR spectroscopy is a powerful method for the study of molecular sieves. However, due to technical challenges, the vast majority of the high-resolution solid-state NMR studies on molecular sieve crystallization are ex situ. In the present work, using a new commercially available NMR rotor that can withhold high pressure and high temperature, we examined the formation of molecular sieve AlPO4-11 under dry gel conversion conditions by in situ multinuclear (1H, 27Al, 31P, and 13C) magic-angle spinning (MAS) solid-state NMR. In situ high-resolution NMR spectra obtained as a function of heating time provide much insights underlying the crystallization mechanism of AlPO4-11. Specifically, in situ 27Al and 31P MAS NMR along with 1H → 31P cross-polarization (CP) MAS NMR were used to monitor the evolution of the local environments of framework Al and P, in situ 1H → 13C CP MAS NMR to follow the behavior of the organic structure directing agent, and in situ 1H MAS NMR to unveil the effect of water content on crystallization kinetics. The in situ MAS NMR results lead to a better understanding of the formation of AlPO4-11.

Design of β-Alanine-Derived Novel C18 Stationary Phase Containing Embedded Urea and Amide Groups for the Separation of Versatile Analytes.

Novel stationary phases have been emerging recently. A β-alanine-derived embedded urea and amide group-containing C18 phase (Sil-Ala-C18) was prepared for the first time. The media were packed into a 150 × 2.1 mm HPLC column, and the newly designed column was evaluated with the Tanaka and Neue test protocols in reversed-phase liquid chromatography (RPLC) separation mode. Moreover, it was characterized by the Tanaka test protocol in hydrophilic interaction chromatography (HILIC) separation mode. The new phase was characterized by elemental analysis, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and solid-state 13C cross-polarization magic angle spinning (CP/MAS) NMR spectroscopy at variable temperatures. The chromatographic evaluation involved very good separation of nonpolar shape-constrained isomers, polar and basic compounds in RPLC, and highly polar compounds in HILIC compared to the commercial reference columns. The Sil-Ala-C18 phase was able to separate the challenging β- and γ-isomers of tocopherol. The phase was also successfully applied for the separation of the isomers of tocopherol (vitamin E) and capsaicinoids from real samples of chili peppers (Capsicum spp.) in RPLC and ascorbic acid (vitamin C) in HILIC.

Potentially Health-Promoting Spaghetti-Type Pastas Based on Doubly Modified Corn Starch: Starch Oxidation via Wet Chemistry Followed by Organocatalytic Butyrylation Using Reactive Extrusion.

Extruded spaghetti-type pasta systems were obtained separately either from native or oxidized starch prepared via wet chemistry with the aim of evaluating the effect of oxidation modification of starch. In addition to this, the butyrylation reaction (butyrate (Bu) esterification-short-chain fatty acid) using native or oxidized starch was analyzed under reactive extrusion (REx) conditions with and without the addition of a green food-grade organocatalyst (l(+)-tartaric acid) with the purpose of developing potentially health-promoting spaghetti-type pasta systems in terms of increasing its resistant starch (RS) values. These would be due to obtaining organocatalytic butyrylated starch or not, or the manufacture of a doubly modified starch (oxidized-butyrylated-starch oxidation followed by organocatalytic butyrylation) or not. To this end, six pasta systems were developed and characterized by solid-state 13C cross-polarization magic angle spinning nuclear magnetic resonance (CP MAS NMR) spectroscopy, degree of substitution (DS), attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), pancreatic digestion, free Bu content analysis and in vitro starch digestibility. The results obtained here suggest that starch oxidation hydrolytically degrades starch chains, making them more susceptible to enzymatic degradation by α-amylase. However, the oxidized starch-based pasta systems, once esterified by Bu mainly on the amylose molecules (doubly modified pasta systems) increased their RS values, and this was more pronounced with the addition of the organocatalyst (maximum RS value = ~8%). Interestingly, despite the checked chemical changes that took place on the molecular structure of starch upon butyrylation or oxidation reactions in corn starch-based spaghetti-type pasta systems, and their incidence on starch digestibility, the orthorhombic crystalline structure (A-type starch) of starch remained unchanged.