Distance Of 1m Research Articles

Comparison of physical fitness and game demands between young female rugby sevens athletes in different sports development contexts

Aim: This study aimed to compare the physical and game demands among young women rugby sevens athletes inserted in a long-term athlete development process (LTAD) and selected to the national team. Methods: Twenty-four athletes were recruited in two different contexts: thirteen participants were inserted in the LTAD process (VSR) and eleven Brazilian athletes were selected for the youth national team (BRA). One-repetition-maximum tests, jumping performance, sprint times, and aerobic capacity determined the physical performance and GPS recorded the game demands in the national championship. T-tests for independent samples and Mann-Whitney were used to compare the groups, and effect size (ES) was presented using Cohen's d. Results: 10-m sprint time (p = 0.001; ES = 1.47), 30-m sprint time (p = 0.005; ES = 1.42), sprint distance (p = 0.030; ES = 1.14) and distance in zone 5 (p = 0.040; ES = 0.92) showed differences between groups, with better results in BRA. Moreover, VSR athletes covered greater distances in zone 1 while BRA had greater distances in zone 4, with moderate ES. The strength, power of lower limbs, and aerobic fitness variables did not present significant differences between the groups. However, VSR had the highest mean in squat jump and countermovement jump, with moderate ES. Conclusion: Speed in physical tests and game demands differentiated the groups, and these parameters are essential for selection for the national team. However, the LTAD process can bring physical

Assessing public street lighting in Morocco: evaluating efficiency and the impact of geometrical parameters on luminance

The main objective of this study is to present a bench marking of the public street lighting in typical road in Morocco. The study deals with a comparison between the conventional technology used in Moroccan road and the LED technology. The simulated system is based on road with two directions and a sidewalk, three arrangements type of pole layout are treated (Left, Middle and Two sides arrangement). Also, in this paper deals with a parametric analysis based on the variation of boom angle, light Center high and the pole distance in order to determine the luminance of each arrangement at each pole distance. The simulation is carried out using two luminaries, the fi rst one represents a conventional technology and LED lamp. The founding of this paper shows that the LED lamp present a high luminance value of 20 cd/m² for a pole distance of 10m and boom angle of 0°, in comparison with the conventional lamp that present a luminance of 8 cd/m² at the same condition. The left arrangement type shows the best energy effi ciency indicators such as DE and power per km, this means that this disposition is less consuming of energy and acceptable luminance values. Therefore, these two indicators play a crucial role in enhancing the effi ciency of the lighting.

Interpolation linearization predistortion technology for FMCW LiDAR.

Frequency-modulated continuous-wave (FMCW) laser ranging technology is an important development direction of light detection and ranging (LiDAR) for the future. It has the advantages of high ranging accuracy, high resolution, wide range, and no ranging blind zone. A distributed feedback laser can be used as a high-quality light source in FMCW laser ranging systems because of its wide frequency modulation range, simple frequency modulation mode, and small package. Aiming at the nonlinear problem of the laser in the frequency modulation process, we present a novel, to our knowledge, predistortion algorithm based on interpolation linear fitting to enhance the linearity of the FMCW laser for LiDAR systems. The sweeping frequency curve of the laser is obtained using the Hilbert transform, and then the sweeping frequency curve is segmented and linearly fitted to calculate the interpolated driving current signals corresponding to linear frequency changes. Using this method, we achieved a nonlinearity error lower than 1e-7 for the swept-frequency signal and demonstrated that the ranging error is less than ±5c m at a distance of 100m in the FMCW system. In addition, we also demonstrated a 3D static object point cloud with high imaging quality. Compared with the iterative predistortion algorithm based on the function fitting, this method avoids fitting errors at the inflection points of the triangular swept-frequency signal and the complexity of multiple iterative calculations. It enables rapid generation of pre-distorted swept-frequency signals, making it particularly suitable for real-time applications of automotive LiDAR systems.

Olympic Weightlifting Training for Sprint Performance in Athletes: A Systematic Review with Meta-analysis.

This systematic review and meta-analysis aimed to determine whether Olympic weightlifting (OW) exercises would improve sprint performance when compared to a control intervention, (no training, standard sport-specific training, traditional resistance training, or plyometric training). Medline, Web of Science, SportDiscus, CINAHL, and Biological Science from inception to September 2022 was searched. Two authors independently selected the included studies, extracted data, and appraised the risk of bias. Certainty of the evidence was assessed using the Grading of Recommendations Assessment, Development, and Evaluation methodology. The primary meta-analysis combined the results of the sprint performance over the full length of each sprint test. The secondary meta-analyses combined the results of the sprint performance at 5, 10, and 20 m distance to capture information about the acceleration phase of the sprint tests. Eight studies with 206 athletes (female n=10, age range: 18.9-24.2 years) were identified. Sprint performance did not differ significantly comparing OW to the control intervention, nor at the full length (standardized mean difference=-0.07, 95% CI=-0.47 to 0.34, p=0.75, I2=46%) or during the acceleration phase (p≥0.26) of the sprint test. OW training does not improve sprint performance to a greater extent than comparator interventions.

Sex‐based differences in track running distances of 100, 200, 400, 800, and 1500m in the 8 and under and 9–10‐year‐old age groups

AbstractThere are contradictory claims regarding sex‐based differences in athletic performance before puberty, but there has been minimal evaluation of sex‐based differences in competitive running performance before puberty. The purpose of this project was to determine if there are prepubertal sex‐based differences in track running performance. Finalist times from the USA Track and Field National Youth Outdoor Championships and National Junior Olympic Championships during the years 2016–2023 for running distances of 100, 200, 400, 800, and 1500m in the 8 and under and 9–10‐year‐old age groups were analyzed for sex‐based differences. In the 8 and under age group, the males were, on average, faster (p = 0.000, Hedges' g = 0.632–0.834) than females by 4.0% in the distance of 100m, 4.7% in 200m, 5.3% in 400m, 6.7% in 800m, and 6.1% in 1500m. In the 9–10‐year‐old age group, the males were, on average, faster (p = 0.000, Hedges' g = 0.584–1.089) than females by 2.9% in the distance of 100m, 4.6% in 200m, 4.0% in 400m, 4.0% in 800m, and 5.9% in 1500m. In each distance and age group between 2016 and 2023, the individual fastest male was faster than the individual fastest female by 3.7 ± 2.3%. The present data indicate that, in elite competition, males in the 8 and under and 9–10‐year‐old age groups typically run faster than females of the same age by 2.9%–6.7% for running distances of 100, 200, 400, 800, and 1500m. These findings are of particular importance as government agencies and sports organizations consider policies regarding single sex sports competition for youth.

Distribution characteristics and influencing factors of Haemaphysalis longicornis around goat sheds in Jinan city, East China.

As one of the most important disease vectors worldwide, ticks can transmit a number of pathogenic organisms to humans and domestic animals and cause a variety of important natural focal diseases and zoonoses. Domestic livestock play a vital role in the dispersal of ticks from the field environment to the human settlement, contributing to the prevalence of tick-borne diseases. Identification of the tick control region could contribute a vital role in strategic planning and cost-effective tick control measures. However, little is known about the spatial distribution characteristics of ticks around livestock sheds, which will lead to abusage and overuse of insecticides. Therefore, this study aimed to explore spatial distribution characteristics and correlation factors of ticks around goat sheds. A total of 3898 ticks were collected from eight goat sheds from April to June in Jinan city. All the sampled ticks belonged to the same species, namely Haemaphysalis longicornis, and 88.8% of them were nymphs. A significant positive correlation was noted between free-living ticks and parasitic ticks (r = 0.411, P < 0.001). However, there was a significant negative correlation between number of free-living ticks and distance from the goat sheds (r = -0.622, P < 0.001). Within 20m from the goat sheds, 2211 ticks were collected respectively, representing 56.7% of the total free-living ticks. At a distance of 30m, 57.6% decline in the tick density was found with a significant difference (q = 5.534, P < 0.001). In conclusion, focusing control efforts near the goat sheds should be recommend for tick prevention and control.

Multi-channel synthetic aperture infrared imaging and experimental research.

The synthetic aperture infrared radio imaging method based on laser local oscillator coherent detection has potential application value for astronomical observations. This paper studies the multi-channel synthetic aperture infrared imaging method and conducts experimental verification using a principle prototype. In the short-wave infrared band, five beam-expanding fiber collimators are used to build an observation structure of five laser local oscillator coherent detection channels at a near-field distance of 5m to carry out physical experiments. The laser local oscillator wavelength is 1.55µm, and the AD sampling rate is 4GHz. For the infrared radiation source signal, the phase relationship of the infrared signals between channels acquired by the prototype principle is stable, and the five-channel synthetic aperture imaging results are consistent with the computer simulated results. The experiment verified the effectiveness of the laser local oscillator comprehensive aperture infrared radio imaging method.

Ecosystem-based fishery enhancement through pen culture of Indian major carp Labeo catla in a tropical floodplain wetland of North Eastern Region, India, during COVID pandemic.

The present study was conducted with the objective of developing ecologically and economically feasible pen culture protocols for Labeo catla as an alternate income source for wetland fishers in the context of the COVID-19 pandemic. Yearlings of L. catla (12.33 ± 1.99 cm mean total length and 26.05 ± 6.57 g mean weight) were reared in HDPE pens (500 m2 area each) at three different stocking densities of 3 (SD3), 6 (SD6) and 9 (SD9) no. m-2 in triplicates. Fishes were fed with floating pelleted feed containing 28% crude protein and 5% crude lipid two times daily at 1.5-3% of body weight. During the culture period, fish grew from 26.05 ± 6.57 to 434.61 ± 30.63 g, 306.13 ± 10.68 g and 221.13 ± 14.92 g, respectively, at stocking densities of 3, 6 and 9 no. m-2 respectively. Weight gain percentage and specific growth rate declined with increase in stocking density. Gross fish yield increased with increase in stocking density and was highest at SD9 (657.92 ± 53.55 kg pen-1), while net fish yield increased initially from SD3 to SD6 (594.31 ± 29.72 kg pen-1) and then declined with further increase in stocking density. Important water quality parameters influencing fish growth were measured, and significant difference (p > 0.05) was not observed between treatments (inside pens) and reference site (outside pen at 10-m distance). Weight gain was positively correlated (p < 0.05) to water temperature (r = 0.989) and total phosphorus (r = 0.81). Benefit cost ratio and net return was highest at SD3 (1.61; US $518.88, respectively). Stocking density of 3 no. m-2 can be considered economically feasible for table fish production of L. catla in pens. Post pen culture, monthly income of fishers increased by 10.76-179.11%, with a mean increase of 90.57%, compared to the period of first COVID-19 wave in India. The present findings can provide an impetus for effective utilization of pen enclosures for income generation and livelihood enhancement of small-scale wetland fishers during pandemic.

Evaluation of flow, supply, and demand for noise reduction in urban area, Hamadan in Iran.

Noise pollution is one of the consequences of urbanization that can cause environmental disturbances in urban areas. Urban ecosystems provide noise reduction services through Urban Green infrastructures (UGIs). Many studies have been conducted to evaluate and model traffic noise, but none have addressed the flow, supply, and demand of noise reduction ecosystem services. The main purpose of this paper is to present a new methodology for estimating flow, supply, and demand for noise reduction in Hamadan city that has not been mentioned in any paper so far. UGIs were classified into six main categories: agricultural lands, gardens, parks, abandoned lands, single trees, and street trees. A total of 57 sampling stations for sound measurement were made in August 2018. The current map of noise pollution (flow) was created using the Kriging method. The amount of supply was measured up to a distance of 50 meters from the main roads based on two approaches (the distance effect and the sound barrier effect). To quantify the demand, the current sound intensity level in the noise-sensitive land uses was compared with standards. Zonal statistics was used for spatial analysis of supply-demand in the urban neighborhood as a working unit. Results showed that at distances of 5m, 10m, 15m, and 20m, the average noise reduction was found to be 1.61, 2.83, 3.92, and 5.33 dB, respectively. Sound barriers at distances of 5m and 10m resulted in an average sound reduction of 1.61 and 2.83 dB, respectively. Individual trees, strip trees, abandoned lands, parks, and gardens led to a decrease in traffic noise by 0.3, 1, 0.1, 3.5, and 4.5 dB, respectively. The clustering analysis revealed a significant spatial clustering of noise pollution in Hamedan. The results and new methodology of this research can be used in similar areas to estimate the supply and demand of noise reduction and also for decision-makers to take management actions to increase supply and meet the demand for noise reduction service.

Development of Fish Distribution Information System for Digital Virtual Assitant based on Harvesine with LoRA Node

The pressing issue of suboptimal and inefficient traditional fishing practices among local communities. Traditional fishermen often operate with inadequate equipment, resulting in less-than-optimal fishing outcomes. In this context, the lack of modern tools and techniques hinders the effectiveness of fish capture. Addressing these challenges is crucial for enhancing the productivity and sustainability of traditional fishing practices. The study aims to develop an advanced Fish Distribution Information System tailored for a Digital Virtual Assistant using the Haversine method and LoRA nodes. This system provide instantaneous, location-specific details about fish distribution and involves designing a data logger serving as repository for travel histories, utilizing a website as the user interface interfacing with a Leaflet map in a Geographic Information System (GIS). The Haversine method is employed for precise distance computations between LoRA Gateway, information about fish distribution, and unfavorable weather conditions within the specified area. the resukt show that The distance displayed on the website with the haversine method with excel calculation comparison produces an error calculation of 0.157%, while the percentage error for GPS latitude accuracy is 0.000116% and longitude percentage is 0.000002%. RSSI performance at LoRA ranges from -57dBM at a distance of 50m and -121dBM at a distance of 1500m.

Experimental investigation on the ballistic performance of B4C/Aramid/UHMWPE composite armors against API projectile under different temperatures

In the design of lightweight composite armor, it is crucial to consider the challenging conditions of extreme environments encountered during service. This study proposes to investigate the effect of temperature on the ballistic performance of a B4C/aramid III/UHMWPE composite armor system against 12.7 mm armor-piercing incendiary (API) projectiles with an impact velocity of ∼500 m/s. A series of ballistic experiments were conducted under low temperature (-40 ℃), high temperature (+70 ℃), and room temperature (+20 ℃) respectively considering two shooting distances of 100 m (long-range shooting) and 30 m (close-range shooting). The structural failure modes and associated mechanisms were identified and analyzed in detail from both macroscopic and microscopic scales. The experimental results indicate that the designed composite armor is believed to perform better than the existing design schemes in resisting the 12.7 mm half-speed API projectile on the basis of similar or less areal density. The ballistic performance of the composite armor system is significantly enhanced at low temperatures and weakened at high temperatures in terms of structural damage levels and backplate bulge deformation. The decrease in shooting distance transformed the panel failure mode essentially from non-penetration to penetration under room and high temperatures, whereas the specimens under low temperatures could prevent penetration. Both the ceramic and composite laminate materials are affected by temperature and show different microscopic damage modes, indicating the damage mechanism changes at the microscopic level. These findings provide valuable insight into the design of lightweight composite armor systems to adapt to extreme service environments.

Deciphering microbial communities and their unique metabolic repertoire across rock-soil-plant continuum in the Dayoukeng fumarolic geothermal field of the Tatun Volcano Group.

High temperature and sulfur concentrations in geothermal sulfur fumaroles host unique microbial ecosystems with niche-specific metabolic diversity and physiological functions. In this study, the microbial communities and their functionalities associated with the Dayoukeng geothermal field and the rock-soil-plant continuum were investigated to underpin the microbial modulation at different distances from the fumaroles source. At the phylum level, Bacteroidota, Planctomycetota, Armatimonadota, and Patescibacteria were abundant in plant samples; Elusimicrobiota and Desulfobacterota were in the rock samples while Nitrospirota, Micrarchaeota, and Deinococcota were dominant in the soil samples. Acidophilic thermophiles were enriched in samples within close proximity to the fumaroles, primarily at a distance of 1m. The sulfur and iron-oxidizing acidophilic bacterial genera such as Acidothiobacillus and Sulfobacillus were abundant in the rock samples. The thermoacidophilic archaeon Acidianus and acidophilic bacteria Acidiphilium were abundant in the soil samples. Additionally, Thermosporothrix and Acidothermus were found abundant in the plant samples. The results of the functional annotation indicated that dark sulfur oxidation, iron oxidation, and hydrogen oxidation pathways were abundant in the soil samples up to 1m from the fumaroles, while methanogenic and fermentation pathways were more prevalent in the soil samples located 10m from the fumaroles. Interestingly, the results of this study indicated a higher microbial richness and abundance of acidophilic communities in the soils and plants compared to the rocks of the DYK fumarolic geothermal field.

Controlling toxic and harmful gas in blasting with an inhibitor.

In engineering blasting, while efficiently breaking rocks with explosives, a large amount of toxic and harmful gases are generated, which not only pollutes the production environment but also easily leads to explosion smoke poisoning accidents. It must be highly valued by engineering technicians and management personnel. To effectively control the production of harmful gases during explosive blasting, an environmentally friendly and efficient harmful gas inhibitor has been developed, and its mechanism of action has been analyzed and revealed. Through model and on-site experiments, the appropriate addition ratio and charging structure scheme were determined, and good control effects were achieved. The research results indicate that the environment in which explosives are used has a significant impact on the composition of harmful gases produced during blasting. CO, NO, and NO2 are mainly produced in natural air environments, while NH3, CO, and NO are mainly produced in underground blasting environments. As the proportion of inhibitors added increases (2%, 4%, 6%), the decrease in the concentration of harmful gases during blasting first increases and then decreases. Compared with the control experiment, the total reduction rate of harmful gas concentration is 39.23%, 68.20%, and 59.69%, respectively, and the best control effect is achieved when 4% is added. When using the developed inhibitor adding device for the full hole addition scheme, the control effect of harmful gas concentration in blasting is the best, and the decrease in harmful gas concentration reaches 62.79%~84.73% at a distance of 30m~120m. The use of harmful gas inhibitors for blasting combined with other control measures can significantly improve the blasting operation environment, enhance the safety level of production operations, and have good promotion and application value.

Identification of breeding habitats and kdr mutations in Anopheles spp. in South Korea

BackgroundMalaria is still endemic in South Korea. However, limited information is available on the current Anopheles breeding sites and the occurrence of insecticide resistance-associated genetic mutations and their distribution needed to control the malaria vector efficiently.MethodsThis study explored breeding sites of Anopheline adults in Gimpo-si, near the demilitarized zone (DMZ) in Gyeonggi-do province, South Korea, from 2022 to 2023. Genetic diversity was investigated based on the internal transcribed spacer (ITS2), cytochrome c oxidase subunit I (COI), and knockdown resistance (kdr) genes of Anopheles mosquitoes. A natural environment associated with the seasonal abundance of Anopheles larvae was characterized.ResultsTwo breeding sites of Anopheles larvae and adults were found at a stream margin or shallow freshwater near the forest in Wolgot-myeon in Gimpo-si without cattle shed within 1 km and in Naega-myeon in Ganghwa-gun with cow shed within 100 m in 2022 and 2023, respectively. Both sites were located between the newly cultivated lands and the forest. Besides, both breeding sites were in the valley at a slight elevation of 60–70 m from ground lands and maintained the shadow all day. Overall, the Wolgot-myeon breeding site showed various Anopheles spp. larvae, including Anopheles sinensis. Naega-myeon, an additional breeding site found in 2023, had Anopheles sineroides larvae, and approximately 59.7% (89/149) of An. sinensis adults inhabited within a 100-m distance. The total collection, including larvae and adults, revealed that An. sinensis, Anopheles pullus, Anopheles kleini, An. sineroides, Anopheles belenrae, and Anopheles lindesayi accounted for 44.2% (118/267), 0.7% (2/267), 0.7% (2/267), 22.1% (59/267), 1.9% (5/267), and 30.3% (81/267), respectively. Furthermore, various kdr mutant genotypes (F/F, C/C, L/F, L/C and F/C) in An. sinensis, and the first kdr allele mutant (L/F1014) in An. belenrae were identified in South Korea.ConclusionsTwo breeding sites of Anopheles larvae were studied in Wolgot-myeon and Naega-myeon. Various Anopheles spp. larvae were detected in both habitats, but overall, An. sinensis was the most prevalent adults in both study sites. The occurrence of kdr allele mutant of An. belenrae in South Korea was reported. Rigorous larvae monitoring of Anopheles spp., continuously updating information on Anopheles breeding sites, and understanding the environmental conditions of Anopheles habitats are required to develop an effective malaria control programme in South Korea.

The effects of environmental factors on plant diversity of Darab natural ecosystems in Fars province, Iran.

This research quantitatively evaluated the diversity of plants to protect vulnerable species. To measure vegetation information, the appropriate sampling plot size was determined based on the canopy cover of the dominant species of the study area (1 m2). Then, in each unit, sampling was done along 3 transects of 100m. Along each transect, 10 plots with dimensions of one square meter were placed at a distance of 10m from each other. In each plot, the type, life forms, frequency of plant species, and species density were recorded. Species diversity indices were calculated using Ecological Methodology software. The values obtained from these indicators were analyzed in SPSS 24 statistical software and using the F test. The results of the Analysis of variance (ANOVA) showed that the highest values of the species diversity indices are in the middle altitudes (ecotone) class. ANOVA of the richness, evenness, and heterogeneity indices in different altitude classes showed that the values of the richness indices were not significant, but among the indices related to the heterogeneity, the Hill index and all the evenness indices were significant. Comparing the numerical indices of our communities enables us to determine the impact of environmental stress in a single community to choose the best habitat among a similar group for conservation. A community that has high diversity and richness is important for conservation. Therefore, the authorities must prevent the destruction of the vegetation of the study area in connection with the implementation of principled and correct management by the potential of the region, but also to reduce the pressure of livestock grazing and carry out corrective and restoration operations, to turn these rangelands towards rich diversity.

Effect of different forms of strength training on lower limb power and speed of professional soccer players

Research objective: The main research objective is to analyze the effects of different forms of strength training on the lower limb power and speed of professional soccer players. The research involves the application of a variation strategy in strength training based on varying the intensity of training. The work focuses on comparing two strength training varying external loads. Materials and Methods: The study material consisted of a group of 56 soccer players of the first Polish league, representing a similar sports level with a minimum of 4 years of training experience in the league and in the age range of 22 to 28 years. The study was carried out in the macro-cycle of the preparatory phase in the period after the end of the fall round league games. A 4-week training program was used, during which the players studied carried out an experimental training unit twice a week. One group worked with a load of 50-60% of 1RM (GB1), while the other group worked with a load of 70-80% of 1RM (GB2). The use of pneumatic devices the Keiser Leg Press A420 and Keiser Air Squat A300 (Keiser, Fresno, CA, USA) was used to measure the generated power of the lower limb muscles. A straight-line running test was used to measure speed abilities. A Microgate Witty photocell measurement system (Bolzano, Italy) was used to record running speed variables over a distance of 30 meters. Before the start of the training program, as well as after its completion, the level of locomotor speed and lower limb power were measured. Results: Analyzing the levels of lower limb muscular power and locomotor speed during training with an external load of 50-60% 1RM versus training with an external load of 70-80% 1RM, statistically significantly better results were noted during training with an external load of 50-60% 1RM. The GB1 group with training using an external load of 50-60% 1RM achieved significantly better results than the GB2 group with training using an external load of 70-80% 1RM for 9 variables: double-leg bench press, single-leg bench press (right limb), single-leg bench press (left limb), double-leg squat, single-leg squat (right limb), and sprints over distances of 5m, 10m, 20m, 30m. It was also possible to observe a certain increasing trend in the results in the single-leg squat (left limb), while not statistically significant. Conclusions: Training with an external load of 50-60% 1RM during the preparatory period after the fall round league games is more effective in improving muscle power and speed than training with an external load of 70-80% 1RM.

PENGARUH METODE PEMBELAJARAN MENGGUNAKAN PAPAN LUNCUR DAN PULLBUOY TERHADAP KECEPATAN RENANG GAYA CRAWL 25 METER SISWA CLUB ABDUL AQUATIC COURSE (AAC) SEMARANG

This learning method using a skateboard and pullbuoy is very effective in students' initial learning to swim, and is practiced by students from the Abdul Aquatic Course Semarang club by swimming using a crawl style and a distance of 25m. The purpose of this study was to determine the effect of the learning method using skateboards and pullbuoys on the 25m crawl style swimming speed of Abdul Aquatic Course Semarang students. As well as the difference and which is better between a skateboard and a pullbuoy.&#x0D; This study refers to a quantitative approach and the method used by this researcher is an experimental method, which is a step to compare the tools between a skateboard and a pullbuoy in the initial movement of the crawl style. The target of this research is the student club Abdul Aquatic Course (AAC) Semarang. The data analysis technique in this study used inferential statistical analysis, hypothesis testing.&#x0D; The results showed that the R-square value of the learning method using the pull buoy was greater than the exercise using a skateboard. This means, "training using a pull buoy is better to use in increasing the speed of the 25-meter crawl style swimming for the students of Club Abdul Aquatic Course (AAC) Semarang."&#x0D; The conclusion is that the exercise using a pullbuoy is better than a skateboard in increasing the speed of swimming in the 25-meter crawl style of students at the Abdul Aquatic Course Semarang club. The advice obtained by the researcher is that the trainer is expected to be able to use exercises using pullbuoys as a form of training program at a crawl speed swimming style of 25 meters.

Seasonal analysis of land surface temperature using local climate zones in peak forest basin topography: A case study of Guilin

Understanding the characteristics of Land Surface Temperature (LST) is crucial to mitigate the Surface Urban Heat Island (SUHI) effect. Local Climate Zones (LCZs) framework can be applied in LST analysis and SUHI quantification. However, this framework primarily focuses on evaluating detailed local-scale SUHI, thereby failing to provide a comprehensive assessment of the overarching SUHI trends at the urban level. Additionally, existing LST analyses ignored geographic factors, resulting in partial analysis of LST, especially in areas with complex geography. To fill these gaps, the study develops a SUHI assessment method combining an improved surface urban heat intensity ratio index with LCZs-based SUHII, enabling a dual evaluation of both overall and detailed SUHI effect. The impact of geographic factors, both topography and natural features, on seasonal LST patterns is investigated, especially within built LCZs. Additionally, the spatio-temporal image fusion model is employed to address issues of cloud effects or image mutilations in LST results. Guilin, with unique peak forest basin topography, is selected as a case study to represent complex geographical areas. The results reveal the following: (1) An abnormal heat island phenomenon occurs during winter due to Guilin's distinctive geomorphological conditions. (2) Cooling effects influenced by mountains and water bodies on different built LCZs exhibit seasonal variation, with the strongest cooling effect observed within a 50-m distance. LCZ 2 consistently exhibits the strongest cooling effect. The study offers valuable insights for guiding decisions in sustainable urban planning and design, especially in cities influenced by complex local geography.

Prognostic value of 6-minute walking test for early prediction of doxorubicin induced cardiotoxicity

Abstract BACKGROUND/OBJECTIVES The 6-minute walking test (6MWT) is an easily performed, widely available and well-tolerated test for assessing the functional capacity of patients with HF in everyday clinical practice. The measurement properties of the 6MWT, such as reliability and validity, have been studied in patients with chronic heart failure, coronary artery disease, and cancer. However, little is currently known about the 6MWT and cardiotoxicity. The study was aimed at assessing the incidence of cancer therapy-related cardiovascular toxicity, identified the role of 6MWT as early predictor of early onset cardiotoxicity. Methods We performed a prospective study of 85 patients with breast cancer, treated with doxorubicin-based chemotherapy in the Department of Oncology and Hematology. 2D echocardiography and speckle tracking echocardiography were performed before anticancer treatment was started and after the treatment. We defined anthracycline-induced subclinical cardiotoxicity if a decline in global longitudinal strain (GLS) by &amp;gt;15% from baseline was observed and based on that patients were divided into two groups– patients with subclinical cardiotoxicity and patients without subclinical cardiotoxicity. The 6MWT was developed by the American Thoracic Society comprehensive guidelines. The 6MWT was performed in a long straight hospital corridor, over a 30-m distance. Statistical analysis was performed with „IBM SPSS statistics 27.0" program. Statistical significance level p&amp;lt;0.05. Results In the study population statistically significant GLS reduction was detected before and after the anticancer treatment (-21±0.53 vs. -18.1± 1.18, p&amp;lt;0.01). Of 85 women (mean age, 54.5 (9.3) years) subclinical left ventricle dysfunction was identified in 51 (60%). We found a significant negative correlation between baseline 6MWT and cardiotoxicity (r = 0.3 and p = 0.02). The baseline 6MWT results were significantly lower among patients with subclinical cardiotoxicity (494.3 ± 40.5 m vs 629.8 ± 60.1 m, p&amp;lt;0.001). The diagnostic validity of 6 MWT as a cardiotoxicity biomarker was evaluated using the non-parametric ROC curve (Pic. 1). We obtained an optimal cut-off point of 6MWT of ≤540m. (AUC = 0.98; p &amp;lt; 0.001). Conclusions Baseline 6MWT may be used as independed prognostic predictor of subclinical anthracycline-induced cardiotoxicity.ROC curve for 6MWT and cardiotoxicity

The Impact of Upper Limb Functioning on Gait Patterns in Individuals with Post-Stroke Hemiplegia

Hemiplegia resulting from a stroke leads to a distinct gait pattern and dysfunction in the upper limb. The objective of this study was to determine a correlation between the functionality of the upper limb and selected spatiotemporal parameters of gait in patients with hemiplegia following a stroke. The study comprised a sample of 80 outpatients (45 males and 35 females) with post-stroke hemiplegia, with an average age of 60.78 years, selected using a convenient sampling method. To assess the functionality of the affected upper limb, the study employed the QuickDASH questionnaire, which is a shortened version of the Disabilities of the Arm, Shoulder, and Hand questionnaire. Concurrently, the participants were recorded on video while performing the 4-meter walk test (4mWT). The recorded videos were meticulously analyzed using Kinovea software (version 0.8.15) to calculate gait parameters such as comfortable and maximum speeds, stride length and time on the paretic and affected side, number of steps taken to cover the 4m, and cadence. Pearson Correlation analysis was conducted to explore potential associations between these gait parameters and the QuickDASH score, with a significance level of p &lt; 0.05.&#x0D; The findings revealed significant correlations between upper limb functionality and selected gait parameters. Reduced upper limb functionality correlated with decreased comfortable speed (p &lt; 0.05), maximum speed (p &lt; 0.05), and cadence (p &lt; 0.05) during the 4mWT. In contrast, impaired upper limb function linked to prolonged time to complete the 4m distance (p &lt; 0.05), increased steps taken by both affected (p &lt; 0.05) and unaffected (p &lt; 0.05) sides, and extended stride time on both sides (p &lt; 0.05). However, no substantial correlation emerged between upper limb functionality and stride length on either side (p &gt; 0.05).&#x0D; In conclusion, this study emphasizes the correlation between upper limb functionality and specific gait parameters in post-stroke hemiplegic patients. The correlation between upper limb functionality and selected spatiotemporal parameters of gait underscores the necessity for integrated rehabilitation strategies targeting both upper limb and gait training. These findings contribute to a deeper comprehension of the connection between upper limb disability and gait parameters, emphasizing the significance of personalized treatments in order to maximize the restoration of functionality in individuals who have suffered a stroke.