Abstract
Modern furniture manufacturers work to give their products a high aesthetic and taste, especially those made of PMMA, and make adjustments to treat surfaces that are capable of giving high visual and waterproof properties.Thin films of zinc oxide (ZnO) were prepared using pulsed laser deposition (PLD) technology on PMMA. A pulsed Nd: YAG laser operating at a wavelength of 355 nm was used in which the sample preparation was evaporated from a ZnO target material with a weight of 0.5% and thus deposited on a PMMA substrate at room temperature. Sedimentation was performed under a background pressure of 10− 3 Tor and the best films were obtained at 2 J/ cm2 with an ambient oxygen pressure of 1-2 mTorr. The precipitated coating was diagnosed with atomic force microscopy, optical properties, and wettability properties: roughness was 4.62 nm, permeability in the visible area was 96.5%, and contact angle and hydrophobic wettability were increased to 70.58 ° C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
