Abstract
This paper reports a side-by-side comparison of two wireless and passive sensing systems: inductive and electromagnetic (EM) couplings for an application of in-situ and real-time monitoring of wafer cleanliness in the rinsing process at semiconductor/microelectromechanical system (MEMS) manufacturing facilities. A MEMS sensor is designed to measure the resistivity of water, corresponding to the ionic concentration, to evaluate the rinsing process inside the micro-features. The transponder, containing the MEMS sensor, receives power from an external interrogator, modulates the resistivity data, and emits back the modulated signal to the interrogator, in all wireless and battery-free operation. Two wireless systems based on inductive and EM couplings have been implemented on 4-inch glass wafers, maintaining the wafer form factor. Inductive coupling system has parasitic electric field coupling. The working distance of the inductive coupling system is attenuated in water and is likely limited by signal-to-noise ratio (SNR), while that of the EM coupling is primarily limited by the coupled power. Hence, inductive coupling is suitable for a short distance measurement that allows more sophisticated functionality with sufficient power, whereas EM coupling could be optimized for long distance detection but has a tight power budget. The implemented on-wafer wireless monitoring units achieve a working distance of 6 and 25 cm with a concentration resolution of less than 2% (4 ppb for a 200 ppb solution) for inductive and EM couplings, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call