Wood Adhesives Based on Natural Resources: A Critical Review: Part IV. Special Topics

Abstract

Various naturally-based chemicals can be used directly as wood adhesives or are precursors for the synthesis of adhesive resins. Liquefaction and pyrolysis of wood yield various smaller chemicals derived from the different wood components, which then are used in the preparation of adhesives by replacing mainly phenol as raw material. The possible replacement of formaldehyde in aminoplastic and phenolic resins would solve the question of the subsequent formaldehyde emission.<br/> The multiple unsaturations of the triglycerides in vegetable oils enable polymerization for the direct synthesis of thermosets, as well as bases for polyfunctionalization and crosslinking.<br/> Natural polymers, such as poly(lactic acid)s (PLAs), natural rubber, or poly(hyhydroxyalkanoate)s (PHAs) are thermoplastics and can be used for various special applications in wood bonding, in case they can also be crosslinked. For other thermoplastic wood adhesives, such as PUR or PA, chemicals based on natural resources can at least replace a part or even all synthetic raw materials (monomers); these monomers derive from targeted decomposition of the wood material in biorefineries.<br/> Cellulose nanofibrils (CNFs) can be used as as sole adhesives or as components of adhesives. Hydrogen bonding has a key function in binder applications related to adhesion between cellulose nanoparticles and other materials. CNFs are able to establish strong bonding between wood particles/fibres through flexible and strong films by a simple drying process.<br/> Cashew nut shell liquid (CNSL) is a by-product of the cashew nut processing with cardanol (CD) as main component. CD-formaldehyde resins show improved flexibility compared to phenol-formaldehyde (PF) resins; CD can replace up to 40% of the phenol.