Wind Tunnel Test of a Rotorcraft with Lift Compounding

Abstract

Rotorcraft flight speed is limited by compressibility effects on the advancing blade side and decreasing lift potential on the retreating blade side. It may thus be beneficial to employ a hingeless rotor to generate additional lift with the advancing blade and compensate the resulting rolling moment with a fixed wing on the retreating blade side. This concept is a form of "lift compounding" that appears to show enormous potential. The present paper presents results of a wind tunnel test with a slowed, hingeless rotor and single fixed wing on the retreating blade side. Based on rotor test stand data and flow field measurements, the impact of operational and rotor parameters on system performance and aerodynamics is examined, mutual interaction effects between rotor and fixed wing are analyzed, and dominant flow structures are characterized in the reverse flow region on the retreating blade side. Flow field analysis reveals a reverse flow entrance vortex that freely convects through the reverse flow region and rivals the blade tip vortices in strength. Contrary to previous beliefs, this vortex originates from upstream of the reverse flow region and only its detachment from the rotor blade is related to entering this region. The combination of finite rolling moment trim and aft shaft tilt significantly increases rotor lift coefficient and corresponding peak lift-to-drag ratio of the compound rotorcraft. Results are compared with predictions from a comprehensive rotor analysis that is expanded to cover the main effects of the added fixed wing and is able to reproduce general performance trends of the rotorcraft. The present study highlights that adding a single fixed wing and hingeless rotor to a high-speed rotorcraft could significantly improve its performance.