Wind Farm Power Maximisation via Wake Steering: A Gaussian Process‐Based Yaw‐Dependent Parameter Tuning Approach

Abstract

ABSTRACTMaximising the power production of wind farms is vital to meet the growing demand for wind energy and reduce its cost. Wake effects, resulting from the aerodynamic interactions between turbines in a wind farm, significantly impact farm efficiency, leading to substantial annual power losses. Wake steering, an influential control strategy, involves mitigating wake effects by strategically yaw misaligning upstream turbines to deflect their wakes. Conventional wake steering approaches typically rely on physics‐based analytical wake models with their parameters often calibrated using higher fidelity data. However, these approaches determine a fixed set of parameters prior to conducting wake steering, neglecting each parameter's dependency on yaw misalignment (i.e. the optimisation variables) exhibited throughout the optimisation process, potentially affecting its accuracy. To address this limitation, this paper introduces a novel data‐driven parameter tuning approach that integrates higher fidelity power measurements using Gaussian processes to continuously adapt parameters in lower fidelity wake models based on the current farm's yaw configuration. The effectiveness of the proposed approach is demonstrated on a wind farm and a layout corresponding to the Horns Rev wind farm, where various wind directions are investigated. The results reveal that the approach can enable a lower fidelity model to capture more complex physics, thereby improving its accuracy in wake steering optimisation, while maintaining robustness and computational efficiency. This method holds promise for real‐time control applications and can be extended to other control strategies and closed‐loop frameworks.