Abstract
We have made a wideband measurement of the real part of the dielectric constant of flame retardant #4 epoxy (FR4), a common high-frequency printed-circuit-board insulator. We designed a novel test circuit, an electrically long parallel-coupled microstrip resonator, which was etched on a 0.014-in FR4 substrate, manufactured by NELCO, Melville, NY. We used a computer model of the resonator to extract the dielectric constant at the frequencies of zeroes in its measured transmission response. By adjusting the model's dielectric constant, we tuned the frequency of each zero to match the measured frequency, yielding the dielectric constant at that frequency. To validate our method and results, we present a simple, but original proof that the frequencies of zeroes in the resonator's transmission response are insensitive to input and output mismatches. Additionally, we compare the measured and predicted response of a two-stub filter designed with our measured data. The fabricated filter's measured return loss and insertion loss from 3 to 12 GHz are within 1% of the predictions of Agilent Technology's Momentum.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
