Abstract
Well killing is an important technological stage before conducting workover operation, one of the tasks of which is to preserve and restore the natural filtration characteristics of the bottomhole formation zone (BFZ). Special attention should be paid to the choice of well killing technologies and development of wells in complicated conditions, which include abnormally low reservoir pressure, high oil-gas ratio and carbonate reservoir type. To preserve the filtration characteristics of the productive formation and prevent fluid losses in producing wells during well killing operation, blocking compositions are used. At the same time, an informed choice of the most effective well killing technologies is required. Consequently, there is a need to conduct laboratory physicochemical and coreflood experiments simulating geological, physical, and technological conditions of field development, as similar as possible to actual reservoir conditions. The article presents the results of experimental studies on the development well killing technologies of producing wells during workover operation in various geological, physical, and technological conditions of oil field development. Physicochemical and coreflood laboratory experiments were carried out with the simulation of the processes of well killing and development of wells in reservoir conditions with the use of modern high-technology equipment in the Enhanced Oil Recovery Laboratory of the Department of Development and Operation of Oil and Gas Fields at St. Petersburg Mining University. As a result of the experimental studies, new compositions of well killing and stimulation fluids were developed, which ensure to prevent fluid loss, gas breakthrough, as well as the preservation, restoration and improvement of the filtration characteristics of the BFZ in the conditions of terrigenous and carbonate reservoirs at different stages of oil field development. It is determined that the developed process fluids, which include surfactants (YALAN-E2 and NG-1), have a hydrophobic effect on the porous medium of reservoir rocks, which ultimately contributes to the preservation, restoration and improvement of the filtration characteristics of the BFZ. The value of the presented research results is relevant for practice and confirmed by the fact that, as a result of field tests of the technology for blocking the BFZ with the composition of inverse water–oil emulsion during well killing before workover operation, an improvement in the efficiency of wells operation was obtained in the form of an increase in their oil production rate by an average of 5–10 m3/day, reducing the time required for the well to start operating up to 1–3 days and reducing the water cut of formation fluid by 20–30%.
Highlights
At the current stage of the oil industry’s development, it is generally known that the productivity of production wells is significantly influenced by physical and chemical processes that occur when various technological operations affect the productive reservoir and the fluid that saturates it
In the work carried out, there is no data on the development of highly effective thermally stable emulsifiers of inverse water–oil emulsion (IWOE), which can be used for the preparation of hydrophobic blocking compositions for well killing operations [1,2,3,4,5,6,7,8]
The primary of of new compositions of process fluThe primary task taskwhen whendeveloping developingformulations formulations new compositions of process ids was to determine the optimal concentration of surfactants
Summary
At the current stage of the oil industry’s development, it is generally known that the productivity of production wells is significantly influenced by physical and chemical processes that occur when various technological operations affect the productive reservoir and the fluid that saturates it. Such processes include well killing for the period of workover operation, well completion and stimulation of production. In the work carried out, there is no data on the development of highly effective thermally stable emulsifiers of inverse water–oil emulsion (IWOE), which can be used for the preparation of hydrophobic blocking compositions for well killing operations [1,2,3,4,5,6,7,8]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
