Abstract
Beech is an important tree species in Europe. This study aimed to elucidate the influence of four molecular weights of phenol formaldehyde (PF) resin (266, 286, 387, and 410 g/mol) on the sorption behavior of unmodified and modified beech wood samples using a dynamic vapor sorption (DVS) apparatus. The variations in the environmental relative humidity and moisture content (MC) of the samples were recorded, and the DVS isotherms were plotted from the equipment. During the sorption process, the MC of the modified samples decreased in comparison to that of the unmodified samples, and both apparently decreased with the increasing molecular weight of the PF resin. The DVS isotherm hysteresis plot illustrated a reduction in sorption hysteresis for the modified wood with varying PF resins compared to the unmodified samples. Based on the DVS isotherm adsorption and desorption plots, the decrease in the equilibrium of the MC can be attributed to there being fewer sorption sites in the modified samples, which exhibited the lowest hygroscopicity. Overall, the moisture sorption mechanism for both types of samples was clarified, highlighting a clear correlation between the molecular weight of the applied PF resin and its influence on moisture sorption behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
