Abstract
AbstractIn this study, walnut shell (WSh), hazelnut shell (HSh), and mussel shell (MSh) waste as inexpensive reinforcements were recycled for the preparation of epoxy composite materials. Subsequent used inexpensive fillers are chars (WShC and HShC), which are the pyrolysis solid products of the natural WSh and HSh wastes. Three types of epoxy resins: bisphenol‐A type (DGEBA), modified with polyurethane (MER with PU), and rubber modified (MER with rubber) epoxy resins were used as the matrix in MSh composites. Thermogravimetric analysis of the composites showed that the thermal strength of the epoxy matrix increased significantly with the MSh and chars. The best water sorption results were obtained with the MSh. The contact angle values of MSh composites prepared with DGEBA epoxy resin were quite high (111°–113.5°) and their water retention values ranged from 0.2% to 0.32%. The composites that were produced using 50 wt% chars and the same epoxy resin showed better flammability stability. The full extinction times were determined as 63 and 58 s for WShC and HShC composites, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
