Abstract
The proposed system, helps to increase ground water table level to decrease the water crisis encountered by the people. The rain water harvesting system implemented by the government was a good system by the way but very less monsoon and unpredictable rain has made it unreliable for water table recharging. But an average household of 4 uses nearly 220 litres for bathing and nearly 200 litres for cleaning clothes and utensils per day all the water goes down for the sewage. This project aims in segregating these 400 litres of used water. By collecting all the used water in house and finding out its turbidity using led and photo detector. If water is turbid contents it is discharged into the sewage if the water is not turbid then the water is filtered using corn cobs and then diverted into the rain water harvesting system. This way at least 30 % (120 litres) out of the 400 litres of the used water can be diverted into the rain water harvesting system. When calculated for a month nearly 3600 litres can be recharged into the ground. The water diversion can be done with the help of a valve controlled by a solenoid. These are connected to the microcontroller to control all the process and send to Wi-Fi module.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.