Water-based 2D printing of magnetically active cellulose derivative nanocomposites

Abstract

The fabrication of magnetic materials typically involves expensive, non-scalable, time-consuming or toxic processes. Here we report a scalable, quick and environmentally-benign fabrication of magnetically active materials through screen printing using mechanically flexible paper having micron-sized pores as substrates. In comparison with traditional multicomponent inks, simple aqueous dispersions comprising solely water-soluble cellulose derivatives and cobalt ferrite nanoparticles are used. Depending on the cellulosic matrix used, inks with viscosities in the 500–2.500 mPa s range were obtained for shear rates of 20–100 s−1. Patterns with line widths from 183 to 642 μm with a maximum deviation of 9 % were fabricated. The largest magnetization saturation obtained of 0.024 emu (or 0.021 emu cm-2) for the hydroxypropyl cellulose-based ink demonstrates enough magnetization for applications in areas such as actuators and sensors. This work provides novel insights towards the processing of renewable, magnetically active and mechanically flexible materials with tailored geometries which use water as the sole solvent.