Abstract
The potential of removing Bomaplex Red CR-L dye from electro coagulation sludge has been investigated for different Bomaplex Red CR-L concentrations with varying adsorbent amount, temperature, pH and stirrer speed. Removal of Bomaplex Red CR-L is found to be high at lower pH values. The maximum adsorption of the dye has been achieved in aqueous solutions using 0.5 g of calcinated sludge from electro coagulation at a pH of 2.0 within 20 min. The Langmuir and Freundlich isotherm models were tested and it was found that the Langmuir equation was fitted better than the Freundlich equation. Maximum adsorption capacity ( q m) was calculated as 192.31 mg g − 1 at 333 K. In addition, the adsorption data obtained at various temperatures were successfully applied to pseudo first-order, pseudo second-order and intraparticle diffusion models. The rates of adsorption were found to conform to pseudo second-order kinetics with good correlation ( R 2 ≥ 0.9997). This study showed that calcinated the sludge from electrocoagulation has a highly adsorbent capacity.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
