Abstract
This study aims to implement microbubble two-phase flow in the feed stream to improve mass transfer and achieve improved reverse osmosis (RO) process performance. The swirl-flow microbubble generator (MBG), which can effectively generate microbubbles, is integrated into the conventional RO system and has experimentally proven its performance under various operating conditions. To investigate the influence of microbubbles in the feed stream on the RO process depending on the feed concentration, real seawater and two types of artificial brackish water were used as the feed solution. The formation of microbubble two-phase flows in the feed stream had a positive impact on the transmembrane flux and distillate water quality of the RO process; this demonstrates that improved mass transfer due to microbubbles introduced into the feed can effectively attenuate the concentration polarization effect in the RO process. MBG-RO performance using seawater as the feed solution was found to be more pronounced at lower feed pressures and higher airflow rates, with an improvement in permeation flux of up to 16 %. Meanwhile, the MBG contribution to RO performance was lower when using artificial brackish water with relatively low concentration than that when using seawater.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
