Abstract

In aero-engine compressors, corner separations cause blockage, loss generation, and flow instabilities. The aim of the current study is to gain better knowledge of the vortical structures in corner separation flows and their resultant blockage and loss. Numerical simulations at different incidences have been performed for a high-speed linear compressor cascade. First, vortical structures have been visualized with the help of the Q-criterion and eigenvector method, and those associated with the corner separation have been focused on. It was found that the corner separation occurring on either the pressure surface or suction surface corner region was characterized by a large-scale streamwise vortex, named as the corner separation vortex in this paper. The pressure-side corner separation vortex is observed at a great negative incidence initiated from a focus point on the pressure surface, while the suction-side corner separation vortex observed at all concerned incidences originated from a focus on the endwall near the suction surface. Then, the mechanism by which corner separation vortices resulted in blockage and loss has been uncovered. The results showed that low-momentum fluids inside the core region of corner separation vortices led to the flow blockage and the viscous friction between them, and mainstream was responsible for the entropy generation. One major contributor of low-momentum fluids in the suction-side corner region was an off-wall reversed-flow region which was attributed to the breakdown of the suction-side corner separation vortex. Finally, multi-vortex structures in the leading region of the suction-side corner separation at two high positive incidences have been analyzed. It was found that the horseshoe vortex influenced the formation of the suction-side corner separation vortex, which induced a multi-vortex structure, and prevented the onset location of suction-side corner separation vortex from moving upstream with the increased incidence.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call