Voltage-Sequence-Control-Based High-Current Rectifier System

Abstract

This paper presents a thyristor-based tap changing transformer and a diode rectifier for variable-voltage high-current dc applications. Back-to-back thyristors are connected in series with the transformer taps on the primary side. Thyristors are phase controlled in a continuous manner to achieve variable ac voltage at the secondary side of the transformer. This leads to a variable voltage at the output of the three-phase diode rectifier connected at the secondary side of the transformer. A passive filter is added at the primary side to achieve power factor improvement over the range of output voltage. This scheme is optimized to determine optimum turns ratio of the transformer and optimum reactive power rating of the passive filter. Design guidelines are presented for various values of power factor along with optimum turns ratios and passive filter rating. A 62.5-kW experimental system with a passive filter of 17.5 kVA (reactive) is developed to verify the system performance. In the end, a comparison of the proposed topology with other state-of-the-art topologies is also presented.