Visual detection of S2- with a paper-based fluorescence sensor coated with CdTe quantum dots via headspace sampling.

Abstract

A simple method was developed in this work for facile and visual detection of S2- using a paper-based fluorescence (FL) sensor coated with CdTe quantum dots (QDs) by headspace sampling. With the addition of hydrochloric acid, the target S2- in the liquid phase would transform to H2 S, which was released to headspace and quenched the FL of CdTe QDs in a linear manner through a gas-solid reaction, with any possible liquid-phase interference avoided. The regular quenching caused by S2- in analyte solution with increased concentration could be easily observed by the naked eye, and the limit of detection (LOD) for this method was 0.13 μM and 0.93 μM for FL and visual sensing, respectively, comparable or not to that by other sensing probes. A relative standard deviation of 1.2% was accomplished from seven replicated measurements, implying the high reproducibility, and the recovery for the spiked water samples ranging from 94 to 103%, and illustrating the satisfactory reliability of this method. Moreover, the preparation of this paper sensor was facile and did not require any complicated or time-consuming procedures for additional modification or functionalization as for other probes previously reported.