Viscoelastic analysis of surface deformation above salt caverns for gas storage based on semi-infinite space

Abstract

The construction of salt caverns for energy storage is of strategic significance, but the operation of underground gas storages in salt formations will cause surface deformation. The research and analysis of surface deformation is an important part of the stability evaluation of salt caverns for gas storage. From the perspective of classical mechanics theory, the analytical solution of surface deformation above salt caverns for gas storage is deduced. The surface displacement caused by the contraction of a salt cavern is regarded as the boundary displacement caused by the surface force acting on a spherical cavern in a semi-infinite space. The equivalent conversion of load form is carried out based on the mirror principle. The vertical subsidence and horizontal displacement of the surface of the elastic semi-infinite space is obtained. According to the elastic-viscoelastic correspondence principle, the viscoelastic solution of the surface displacement of the semi-infinite body, regarded as Maxwell body, can be obtained. A numerical model of a salt cavern for gas storage is established based on the engineering practice. The results of the analytical solution and the numerical simulation are compared and analyzed to verify the accuracy of the analytical solution. The analytical solution was applied to predict the surface displacement above a group of caverns, and the influence of the layout of salt caverns and cavern center spacing on the surface displacement is analyzed. The research results show that the regular triangular layout is slightly better than the square layout. The larger the cavern center spacing, the smaller the maximum surface subsidence. The proposed theoretical prediction model can provide a theoretical basis for controlling surface deformation for the construction of gas storage caverns.