Abstract

Production, management, use, and end-of-life of buildings has a large impact on climate change. Therefore, environmental targets are set to lower the greenhouse gas (GHG) emissions from the building sector. To reach these targets building regulation and voluntary environmental assessment methods (EAMs) that evaluate and certify the building’s environmental impact are put forward as tools to push the building sector towards lower GHG emissions. In Sweden, building design is governed by building regulations and the dominant EAM is ‘Miljöbyggnad’ (MB) (“Environmental building”). Today, more than 1900 buildings have been certified by MB and it has influenced the building and property sector. In this chapter the potential impact MB and the linked Swedish building regulations have on building performance, energy use and GHG emissions, will be reviewed and discussed. The analysis investigates several of the MB’s indicators, evaluate to what degree EAMs can influence the design of the building and the energy system to lower the energy use and GHG emissions based on material choices. The analysis presents important aspects that may influence the design of the building and its energy system and what challenges and possibilities the indicators, criteria and regulations can have on buildings and climate change. In addition, some modification and suggestion for improvements are presented.

Highlights

  • Buildings are a major source of environmental impact, such as greenhouse gas (GHG) emissions, and use large amounts of energy and natural resources

  • The analysis focuses on whether the certification system influences the design of the building and its energy system as intended and what challenges and possibilities the indicators, criteria and linked regulations can have on buildings and GHG emissions

  • Gold rating requires proving of reduction of GHG emissions by at least 10% lower than the Silver level for the already chosen building design, frame and foundation

Read more

Summary

Introduction

Buildings are a major source of environmental impact, such as greenhouse gas (GHG) emissions, and use large amounts of energy and natural resources. MB was developed as a joint project between Swedish government, companies in the building and construction sector, several municipalities, insurance companies and academia, as a voluntary environmental rating tool to assess all new buildings in Sweden [4] The aim of this this book chapter is to reflect some viewpoints about the MB’s potential impact on energy use, GHG emissions and effect on building performance. The nine indicators that affect the GHG emissions the most in the areas Energy, Indoor environment and Material were identified and have been studied Their potential impact on GHG emissions and building design will be presented and discussed.

14 Phasing out the hazardous material SILVER SILVER
Background regarding the aspect energy
Heat power demand
Solar thermal load
Share of renewable energy
Indoor environment aspects
Ventilation
Thermal climate in winter
Thermal climate in summer
Daylight
Material aspects
No absolute criteria for embodied greenhouse gas emissions
The impact of the system boundary
The environmental impact of using environmental product declarations
Inclusion of greenhouse gas emissions from transport
Embodied greenhouse gas emissions benchmarks – next step
Concluding discussion
Conclusions regarding the indoor climate indicators

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.