Abstract
Nanowires are considered building blocks for the ultimate scaling of MOS transistors, capable of pushing devices until the most extreme boundaries of miniaturization thanks to their physical and geometrical properties. In particular, nanowires’ suitability for forming a gate-all-around (GAA) configuration confers to the device an optimum electrostatic control of the gate over the conduction channel and then a better immunity against the short channel effects (SCE). In this letter, a large-scale process of GAA vertical silicon nanowire (VNW) MOSFETs is presented. A top-down approach is adopted for the realization of VNWs with an optimum reproducibility followed by thin layer engineering at nanoscale. Good overall electrical performances were obtained, with excellent electrostatic behavior (a subthreshold slope (SS) of 95 mV/dec and a drain induced barrier lowering (DIBL) of 25 mV/V) for a 15-nm gate length. Finally, a first demonstration of dual integration of n-type and p-type VNW transistors for the realization of CMOS inverter is proposed.
Highlights
The continuous demand of high-performance and lowpower devices necessitates integration density enhancement, which pushes the CMOS technology to the ultimate nanoscale size dimension
Nanowire architecture is more suitable for gate-all-around configuration to preserve the device immunity against the short channel effects (SCE) at such scaled dimensions [6, 7]
The TD approach, using conventional microfabrication tools, is more suitable for nanoelectronic applications. It offers perfect control over dimensions, localization, and orientation which leads to highly efficient NW MOSFET devices [10,11,12]
Summary
The continuous demand of high-performance and lowpower devices necessitates integration density enhancement, which pushes the CMOS technology to the ultimate nanoscale size dimension. Nanowire architecture is more suitable for gate-all-around configuration to preserve the device immunity against the short channel effects (SCE) at such scaled dimensions [6, 7]. This architecture is speculated to bring CMOS scaling to the end of the transistor roadmap [8]. The TD approach, using conventional microfabrication tools, is more suitable for nanoelectronic applications It offers perfect control over dimensions, localization, and orientation which leads to highly efficient NW MOSFET devices [10,11,12].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.