Variation of current density with time as a novel method for efficient electrochemical treatment of real dyeing wastewater with energy savings.

Abstract

Electro-oxidation is a promising technology for wastewater treatment with biorefractory organic and nitrogen pollutants; however, the high energy demand hinders its wide application. In this study, a novel method by regulating significant parameter during the electro-oxidation process in a timely manner for real dyeing wastewater treatment with energy savings was studied. Operating factors (i.e., flow rate, initial pH value, electrode distance, and current density) were investigated for chemical oxygen demand (COD) and ammonia removal, and the results indicated that current density was the key factor that obviously influenced the electrochemical performance. Indirect oxidation by active chlorine was then confirmed as the main reaction pathway for pollutant oxidation, and the relationship between the current density and the generation of active chlorine was established, suggesting that a large part of the generated active chlorine was not utilized effectively. Subsequently, a novel method of varying the current density in a timely manner based on the reaction mechanism was proposed; the results indicated that, with similar pollutant removal efficiencies, energy consumption could be reduced from 31.6 to 20.5 kWh/m3. Additionally, the novel system was further optimized by Box-Behnken design: The COD removal efficiency could reach 71.8%, and the energy demand could be reduced by 45.6%.