Abstract

Composite membranes have been synthesized from biopolymer chitosan (CS) and nanosized montmorillonite (MMT) filler crosslinked with sulfosuccinic acid (SSA) as an alternative membrane electrolyte for direct methanol fuel cell (DMFC) application. All prepared membranes were obtained by solution casting technique. Prepared membranes were systematically characterized in terms of water uptake, methanol uptake, and methanol permeability as membrane performance parameter for DMFC applications. Fourier transform infrared spectroscopy was used to confirm the structures of the CS/MMT-SSA composite electrolyte membranes. The addition of sulfosuccinic acid evidently decreased the value of methanol permeability with the lowest value of 2.9973 × 10-7 cm2/s was obtained from CS/MMT-SSA 16% membrane. The addition of sulfosuccinic acid also decreased the absorption of methanol with the lowest value of 45.9459% while the water absorption of 53.6424% occurred in the membrane with the addition of 16% sulfosuccinic acid. As a result, the CS/MMT-SSA composite membrane appears to be a potential candidate for the DMFC applications.Keywords: direct methanol fuel cell; proton exchange membrane; methanol permeability; chitosan

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.