Validation of microparameters in discrete element modeling of sea ice failure process

Abstract

ABSTRACTA GPU-based discrete element method (DEM) with bonded particles is investigated to simulate the mechanical properties of sea ice in uniaxial compressive and three-point bending tests. Both the uniaxial compressive strength and flexural strength of sea ice are related to the microparameters in DEM simulation including particle size, sample size, bonding strength, and interparticle friction coefficient. These parameters are analyzed to build the relationship between the material macrostrengths of sea ice and the microparameters of the numerical model in DEM simulations. Based on this relationship, the reasonable microparameters can be calculated by given macrostrengths in the applications of simulating the failure processes of sea ice. In this simulation, both uniaxial compressive strength and flexural strength of ice increase with the increasing ratio of sample size and particle size. The interparticle friction coefficient is directly related to the compressive strength but has little effect on the flexural strength. In addition, numerical simulations are compared with experimental data to show the performance of the proposed model, and a satisfactory agreement is achieved. Therefore, this microparameter validation approach based on macrostrengths can be applied to simulate the complicated failure process of sea ice interacting with offshore platform structures.