Abstract
Purpose. The study and development of methods for a new type of environmentally friendly alloying of metals with a controlled nonequilibrium concentration of vacancies. Methodology. System analysis of methods of alloying metals with a nonequilibrium concentration of vacancies and the mechanisms of the influence of this alloying on the structure and properties of metals. Results. The theoretical foundations of doping with a nonequilibrium concentration of vacancies by means of vacancy hardening, hydrostatic compression, cyclic deformation, special deformation-heat treatment according to the type of high-speed recrystallization annealing of cold-deformed metal, as well as a combination of these methods are developed. Originality. The processes that result in the interaction of vacancies with moving dislocations, which significantly changes the trajectories of the dislocations and forms a dislocation substructure with special quasi-equilibrium boundaries that are close in properties to the boundaries formed during high-temperature thermomechanical processing. Practical value. The principles of regulating the parameters of vacancy doping, ensuring its effectiveness and the controlled parameters of doping methods, are indicated.
Highlights
Порівняно давно відомо про роль вакансій як легувальних компонентів у твердих розчинах віднімання, особливо інтерметалідах і фазах упровадження [2]
the mechanisms of the influence of this alloying on the structure and properties of metals
special deformation-heat treatment according to the type of high-speed recrystallization annealing
Summary
Мета дослідження − вивчення і розроблення способів нового виду екологічно чистого легування металів контрольованою нерівноважною концентрацією вакансій. Системний аналіз способів легування металів нерівноважною концентрацією вакансій і механізмів впливу цього легування на структуру і властивості металів. Розроблено теоретичні основи легування нерівноважною концентрацією вакансій шляхом вакансійного гарту, гідростатичного стиснення, циклічної деформації, спеціальної деформаційно-термічної обробки за типом швидкісного рекристалізаційного відпалу холоднодеформованого металу, а також комбінацією зазначених методів. Внаслідок яких відбувається взаємодія вакансій з рухомими дислокаціями, що істотно змінюює траєкторії руху дислокацій і формує дислокаційну субструктуру з особливими квазірівноважними межами, близькими за властивостями до меж, що формуються під час високотемпературної термомеханічної обробки. Вказано принципи регламентації параметрів вакансійного легування, що забезпечують його ефективність і контрольовані параметри способів легування. Ключові слова: вакансійний гарт; гідростатичне стиснення; дислокаційна субструктура; деформаційно-термічна обробка; нерівноважна концентрація вакансій; циклічна деформація; швидкісний рекристалізаційний відпал
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.