Abstract
This study examines the effects of varying ultraviolet (UV) exposure times on the properties of UDMA/TEG-DMA composite resins, focusing on degree of conversion, surface morphology, water absorption, shrinkage, hardness, and flexural strength. Composite resin samples were exposed to UV light for 30, 60, 90, and 120 min. The degree of conversion was assessed using Fourier Transform Infrared Spectroscopy (FTIR). Surface morphology was analyzed via Scanning Electron Microscopy (SEM). Water absorption and shrinkage were measured following standard procedures, while mechanical properties, including hardness and flexural strength, were evaluated using a Vickers hardness tester and a 3-point bending test, respectively. The results indicate that a UV exposure time of 90 min optimizes the composite resin properties, achieving the highest degree of conversion at 77 %, optimal surface morphology, minimal water absorption and shrinkage, and superior mechanical properties, including maximum flexural strength and hardness. In contrast, both shorter and longer UV exposure times detrimentally affected these properties, with prolonged exposure causing thermal degradation and reduced performance. This research underscores the importance of precise UV curing time control to enhance the performance and durability of UDMA/TEG-DMA composite resins, providing valuable insights and practical guidelines for their application in dental and industrial fields. HIGHLIGHTS The incorporation of UDMA/TEG-DMA in composite resin formulations significantly enhanced mechanical properties such as flexural strength and modulus. Exposure to UV light affected the degree of conversion of the resin, impacting its polymerization kinetics and potentially influencing long-term durability. The study revealed notable changes in surface morphology, indicating potential implications for bonding characteristics and aesthetic outcomes. Investigating water absorption and shrinkage behavior provided insights into material stability and dimensional changes over time, critical for clinical longevity and patient satisfaction. GRAPHICAL ABSTRACT
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call