Abstract
In this work, UV-cured electroactive polyurethane acrylate (EPU) materials with the superhydrophobic surface structure of biomimetic peacock feather were firstly prepared and applied in anticorrosive coatings. Firstly, amine-capped aniline trimer (ACAT) and vinyl-capped aniline trimer (VCAT) were synthesised and characterised by 1H-nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FTIR) and mass spectroscopy. Polyurethane acrylate (PUA) was synthesised and characterised by 1H NMR and FTIR spectroscopy. EPU was then prepared through the UV curing of PUA with 0, 1, 3 and 5 wt% VCAT (named EPU0, EPU1, EPU3 and EPU5, respectively) and characterised via FTIR. The redox capabilities of the as-prepared EPU series were investigated by cyclic voltammetry studies. EPU with higher VCAT loading (EPU5) exhibited better corrosion protection performance than those with lower VCAT loadings (EPU0, EPU1 and EPU3) based on a series of electrochemical corrosion measurements because of the formation of a dense metal oxide layer as evidenced by Raman spectroscopy. Moreover, EPU5 with the surface structure of biomimetic peacock feather (denoted by BEPU5) was prepared by nanocasting technique with polydimethylsiloxane as the flexible transparent negative template. The surface morphology and wettability of BEPU5 was investigated by scanning electron microscopy and contact angle (CA) analysis. The CA of BEPU5 remarkably increased to 145° compared with that of EPU5 63°. This massive increase in CA indicates efficient superhydrophobic properties, which were induced by the biomimetic peacock feather and produced outstanding corrosion protection performance for short and long terms based on a series of electrochemical corrosion measurements. This study is the first of its type to produce a biomimetic feather with massive increase in superhydrophobic properties, which is expected to revolutionise biomimetic industrial coating technologies towards better corrosion protective coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.