Abstract

Biodiesel production using the transesterification method generates a large amount of crude glycerol as by-products. Crude glycerol waste can be reused and utilized as an additive in the formulation of biopellet. Tea dregs are a waste produced by the beverages industry that can be used as green fuel in the form of biopellet as an environmentally friendly energy source. This study aims to analyze and characterize biopellet from tea dregs with crude glycerol as an additive to increase the quality. The biopellet formulation contains six levels of crude glycerol composition percentage: 0% (as control), 5%, 10%, 15%, 20%, and 25%. The parameters for the quality assessment of biopellet refer to the SNI 8675:2018 standard. The best formulation of biopellet was obtained in the 10% treatment with properties of density value of 0.93 g/cm3, pellet durability of 98.09%, moisture content of 8.10%, volatile matter content of 73.37%, ash content of 6.08% and calorific value of 16.38 MJ/kg. The addition of up to 10% crude glycerol as an additive has been shown to improve the quality of tea dregs biopellet. Keywords: Additive, Biopellet, Crude glycerol, Tea dregs.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.