Using the absorbed power method to evaluate effectiveness of vibration absorption of selected seat cushions during manual wheelchair propulsion

Abstract

Although wheelchair users are frequently subjected to oscillatory and shock vibrations, little research has been conducted to assess the whole-body vibration exposure of wheelchair users. The purpose of this study was to determine if selected wheelchair cushions alter potentially harmful whole-body vibrations transferred to wheelchair users. Thirty-two participants, who use wheelchairs as their primary mode of mobility, contributed to this study. Four of the most commonly prescribed wheelchair cushions were selected. Participants were asked to propel their wheelchair over a simulated activities of daily living (ADL) course while acceleration and force data were recorded. A repeated measures ANOVA showed no significant differences between the different cushions for the total averaged absorbed power ( p=0.190), the 50 mm curb drop ( p=0.234), or the rumble strip ( p=0.143). A repeated measure ANOVA for the peak curb drop absorbed power revealed a significant difference in the cushions ( p=0.043). The cushions that were most effective in this testing appear to be the Invacare Pindot and the Varilite Solo. Not only did those cushions appear to have the lowest values much of the time but also they did not display the highest values. When comparing results from a similar study, absorbed power appears to be as effective in determining vibration effects in the time domain as the methods in the ISO 2631 Standard.