Using modified poly(3,4-ethylene dioxythiophene): Poly(styrene sulfonate) film as a counter electrode in dye-sensitized solar cells

Abstract

Dye-sensitized solar cells (DSSCs), assembling with nano-crystalline TiO 2 adsorbed cis-Ru(dcb) 2(NCS) 2 dye (known as N3) using polar solvent-treated poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) coating on a conductive glass (fluorine-doped tin oxide, FTO) as a counter electrode, were studied. The conductivity of a bare PEDOT:PSS film was only 2±0.05 S/cm. However, the conductivities of PEDOT:PSS films treated with dimethyl sulfoxide (DMSO), N, N-dimethyl acetamide (DMAc), N, N-dimethyl formamide (DMF), and dichloromethane (DMC) reached 85±15, 45±10, 36±7, and 20±6 S/cm, respectively. In addition, carbon blacks (0.02, 0.1, 0.5, 1.0, 2.0 wt% with respect to PEDOT:PSS aqueous solution) were added into the DMSO-treated PEDOT:PSS solution (denoted as DMSO-PEDOT:PSS) to enhance the conductivity. Atomic force microscopy (AFM) images of PEDOT:PSS and various DMSO-PEDOT:PSS films coated on the FTO glasses were examined. The topographical images reveal that the increased surface roughness is responsible for the enhanced electrochemical property of the DMSO-PEDOT:PSS films. AC impedance technique was also employed to analyze the kinetics at the electrolyte/counter electrode interface. The DSSC using carbon black (0.1 wt%)-modified DMSO-PEDOT:PSS conductive coating as a counter electrode reached a cell efficiency of 5.81% under 100 mW/cm 2. This efficiency is higher than a DSSC using Pt as a counter electrode (5.66%).