Using cross-correlations of ambient vibrations for passive structural health monitoring of a high-speed naval ship

Abstract

Previous studies have used the cross-correlation of ambient vibrations (CAVs) technique to estimate the impulse response (or Green's function) between passive sensors for passive imaging purposes in various engineering applications. The technique (CAV) relies on extracting deterministic coherent time signatures from the noise cross-correlation function computed between passive sensors, without the use of controlled active sources. Provided that the ambient structure-borne noise field remains stable, these resulting coherent waveforms obtained from CAV can then be used for structural monitoring even if they differ from the actual impulse response between the passive sensors. This article presents experimental CAV results using low-frequency random vibration data (>50 Hz) collected on an all-aluminum naval vessel (the HSV-2 Swift) operating at high speed (up to 40 kn) during high sea states. The primary excitation sources were strong wave impact loadings and rotating machinery vibrations. The consistency of the CAV results is established by extracting similar coherent arrivals from ambient vibrations between the pairs of strain gages, symmetrically located across the ship's centerline. The influence of the ship's operating conditions on the stability of the peak coherent arrival time, during the 7 days trial, is also discussed. [Sponsored by ONR, N00014-09-1-0440.]