Use of the mark-tracking method for optical fiber characterization

Abstract

The mark-tracking method was used in the uniaxial tensile test to determine the elastic properties of optical fibers. The mark-tracking method is based on the follow-up of two markers on the specimen with the help of an image processing technique. It allows us to determine the true strain with respect to the small strains assumption (≤1%) or the finite strains (>1%) without any impact of the rigid solid movement or pulley fiber sliding on the measured strain. Both coated optical fiber and stripped fiber were subjected to the uniaxial tensile test and the cantilever beam bending test. The Young’ modulus results of the stripped fiber were found to be very similar for both tests. Thus, the mark-tracking method is adaptable to the tensile test of optical fibers and the elastic behaviors of both coated optical fiber and stripped fiber are found to be non-linear. Their Young's moduli are 22 and 79 GPa, respectively. These results revealed that those coatings play a mechanical role in fiber elongation.