Abstract
Abstract Frac-driven interactions (FDIs) often lead to sharp decline in gas and oil production rates of wells in shale gas/oil reservoirs. How to minimize the FDI is an open problem in the oil and gas industry. Xiao et al.’s (2019, “An Analytical Model for Describing Sequential Initiation and Simultaneous Propagation of Multiple Fractures in Hydraulic Fracturing Shale Oil/Gas Formations,” Energy Sci Eng., 7(5), pp. 1514–1526.) analytical model for two-fracture systems was extended in this study to obtain a general model for handling multiple fractures. The general model was used to identify engineering factors affecting the maximum permissible stage fluid injection time for minimizing FDI. On the basis of model results obtained, we found that increasing fluid injection rate can create more short fractures and thus increase the maximum permissible stage injection time before FDI occurs. Use of dilatant type of fracturing fluid (n > 1) can reduce the growth of long fractures, promote the creation of more short fractures, and thus increase the maximum permissible stage injection time before FDI occurs. It is also expected that injecting dilatant type of fracturing fluid at high rate will allow for longer injection time and thus larger injection volume, resulting in larger stimulated reservoir volume (SRV) with higher fracture intensity and thus higher well productivity and hydrocarbon recovery factor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.