Abstract
Asymmetric hollow fibre membrane modules coupled with a concentrated alkaline solution were investigated both experimentally and theoretically for the removal of H 2S from gas streams. Each of the modules used consisted of a bundle of hollow fibres having an ultrathin layer at the outer edge of the hollow fibre. The hollow fibres were prepared from polysulfone/N-methyl-2-pyrrolidone/1-propanol and polyethersulfone/N-methyl-2-pyrrolidone/ethanolpolymer solutions. A gas mixture containing 16–24 ppm of H 2S was fed into the fibre lumen and was in countercurrent contact with a 10% NaOH solution fed in the shell side of the modules. The effects of membrane area, gas-phase velocity, feed gas pressure and membrane properties in terms of membrane resistances on H 2S removal were examined. Laminar parabolic velocity profile was adopted to characterize the flow of the gas mixture in the hollow fibre lumen. The numerically calculated results agreed reasonably well with the experimental data in most cases. Both the experimental and the simulation results indicate that unless the resistance of the membranes approaches to zero, the radial concentration gradient of H 2S in the hollow fibre lumen is always negligible for the H 2S–NaOH (solution) system employed in this study.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call