Abstract
Deep radioactive waste deposits require specific solutions to close underground galleries and avoid any radioactive migration in the environment. One investigated solution consists of a swelling clay plug that induces a swelling pressure of approximately 7MPa on the walls of the galleries. The clay plug is confined by a concrete plug to maintain and drive the swelling pressure towards the walls of the galleries. The concrete plug must therefore be designed to endure such a pressure. This paper addresses the mechanical strength of a cylindrical concrete plug with a ring-shaped tooth, a free face and a uniform compressive stress over the other face. Two experimental tests over 1/43 reduced samples are first performed and show two collapse mechanisms: dome collapse and tooth-shear collapse. Upper- and lower-bound solutions are investigated based on the Mohr–Coulomb criterion from nonlinear criteria of concrete. The choices of parameters for the friction angle (φ) and cohesion (C) are discussed in relation to the uniaxial compressive and tensile strength of the concrete and the magnitude of the stresses in the model. The results of the simplified analytical, numerical and experimental approaches are then compared, with good agreement found between the approaches.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call