Unraveling the complex interplay between elastic recovery, contact pressure, and friction on the flank face of the micro tools via plunging-type testing

Abstract

A good understanding of the interplay between the cutting tool edge radius, elastic recovery, friction, and contact pressure is essential for better modeling of ploughing forces during micro-scale cutting. This study conducts plunging tests on an ultra-precision CNC with engineered tungsten carbide cutting tools on commercially pure titanium alloy. The cutting tool edge radius is prepared to be around 3.5–4 μm, which resembles those cutting tools used in micro scale machining. During plunging tests, the micro cutting tool is given a sinusoidal movement with an amplitude close to edge radius of the tool as the work material is rotated at a constant speed. The residual depth profiles of the webs corresponding to the commanded depths were investigated in detail to identify elastic recovery rate. The cutting and thrust force measurements during plunging experiments together with identified elastic recovery rate was employed in an analytical model of micro scale machining to obtain the variations of contact pressure and coefficient of friction as a function of commanded depth. Due to the scale of the experiments that were performed, the effects of surface topography of the cutting tool and possible alignment errors are also considered in the analytical model. A linear relationship between the contact pressure and elastic recovery has been identified during ploughing-dominated machining conditions for the work material and the cutting tool pair considered in this study. The proposed experimental technique is shown to be promising in terms of modeling ploughing forces during micro-scale cutting.