Universal Strategy with Structural and Chemical Crosslinking Interface for Efficient and Stable Perovskite Solar Cells

Abstract

AbstractDue to the limited interface contact and weak interfacial interaction, planar heterojunction perovskite solar cells (PSCs) have space for further improvement. Herein, a structural and chemical crosslinking interface is proposed and constructed by introducing an extra layer, which blends tin dioxide (SnO2) nanoparticles with chloride salts. Since the incorporated materials can be dissolved during the fabrication of perovskite, the quality of perovskite films is improved, leading to larger grain size and reduced trap‐state density. Also, more chloride ions at the SnO2/perovskite interface are observed and the interaction between Cl− and Sn4+ is confirmed. It results in more pronounced n‐type SnO2 with better conductivity and deeper conduction bands, leading to preferable energy level alignment between SnO2 and perovskite. Consequently, the open‐circuit voltage and fill factor of the devices increase, and target cells present better stability, retaining 98% of initial efficiencies after >10 000 h storage in dry air (≈5% relative humidity) and maintaining 85.50% of the initial efficiency after 1000 h of operation under light. This strategy enables the achievement of 25.28% efficiency with a low bandgap (1.53 eV) perovskite composition, and it is confirmed to be universal when other related materials are utilized.