Abstract
In general, the undrained strength anisotropy of clays is found in nature. Its effect on a stability problem during undrained loading should be considered in order to get a more accurate and realistic safety assessment. In this paper, the undrained stability of unlined square tunnels in anisotropic and non-homogeneous clays is investigated by the lower bound finite element limit analysis using second-order cone programming. The anisotropic undrained strength of clays is modelled by using an elliptical strength envelope under plane strain conditions. The stability analyses of the problem are performed by the comprehensive investigations of the effects of the cover-depth ratio, the normalized overburden pressure, the normalized strength gradient, and the anisotropic strength ratio on the stability load factor and associated failure mechanisms. The computed lower bound solutions are validated with the existing results of square tunnels in isotropic clays. The new approximate equations of the stability load factor and factor of safety for square tunnels in anisotropic and non-homogeneous clays are first time presented by using a nonlinear regression, hence providing a reliable, accurate and convenient tool for stability analyses of the problem in practice. The numerical results reveal that the strength anisotropy has a significant impact on the stability load factor, especially when anisotropic clays have much difference in undrained strengths between compression and extension.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.