Undoped and Fe-Doped Anatase/Brookite TiO2 Mixed Phases, Obtained by a Simple Template-Free Synthesis Method: Physico-Chemical Characterization and Photocatalytic Activity towards Simazine Degradation

Abstract

For the first time, Fe-doping (0.05, 1.0, and 2.5 wt.% Fe) was performed on a high-surface-area anatase/brookite TiO2 by adopting a simple template-free sol-gel synthesis followed by calcination at a mild temperature. The powders’ textural and surface properties were characterized by following a multi-technique approach. XRD analysis showed that the anatase/brookite ratio slightly varied in the Fe-doped TiO2 (from 76.9/23.1 to 79.3/22.7); Fe doping noticeably affected the cell volume of the brookite phase, which decreased, likely due to Fe3+ ions occupying interstitial positions, and retarded the crystallite growth. N2 sorption at −196 °C showed the occurrence of samples with disordered interparticle mesopores, with an increase in the specific surface area from 236 m2 g−1 (undoped TiO2) to 263 m2 g−1 (2.5 wt.% Fe). Diffuse Reflectance UV-Vis spectroscopy showed a progressive decrease in the bandgap energy from 3.10 eV (undoped TiO2) to 2.85 eV (2.5 wt.% Fe). XPS analysis showed the presence of some surface Fe species only at 2.5 wt.% Fe, and accordingly, the ζ-potential measurements showed small changes in the pH at the isoelectric point. The photocatalytic degradation of simazine (a persistent water contaminant) both under UV and simulated solar light was performed as a probe reaction. Under UV light, Fe-doping improved simazine degradation in the sample at 0.05 wt.% Fe, capable of degrading ca. 77% simazine. Interestingly, the undoped TiO2 was also active both under UV and 1 SUN. This is likely due to the occurrence of anatase/brookite heterojunctions, which help stabilize the photogenerated electrons/holes.